Undermount Kitchen Sink INSTALLATION INSTRUCTIONS 1/8
Undermount Kitchen sink Premium grade handmade sink 16 gauge Stainless Steel 304 Vertical angle corner/R10 radius coved corner Best-in-breed sound and thermal insulation Limited lifetime warranty In Accordance with Industry Codes & Standards for USA & Canada All LORDEAR Stainless Kitchen Sinks are Certified & Listed By cUPC. CAUTION Due to the weight and sharp edges of the sink, exercise caution when handling, moving or lifting the box or the sink.
TOOLS Safety glasses / maker / silicone adhesive sealant / tape measure / Jigsaw / rags / wood braces / level / screws / bladed screwdriver 3 Types of Under Mount Sink Installation Step 1 : Position Cutout Template and Trace It with Pencil.
Step 2 : Cut the opening in the countertop by carefully following the traced line. Pls use the appropriate saw that best fits your countertop material. Step 3 : Drill Hole in Countertop. Turn the countertop over and drill 3/8” diameter x 1/2” deep hole in the countertop, mounting holes should be ½” from edge of sink. Insert anchors into drilled holes and lightly tap with a hammer until flush. Step 4: Secure Sink to Countertop.
Step 5: Attach Mounting Hardware to Secure Bowl. Remove excess sealant from inside lip. Allow sealant to set for 30 – 60 minutes. Step 6: Install Plumbing Fixtures. • Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instruction. • Run water into sink and check for leaks.
MAINTENANCE INSTRUCTIONS FAQs 1. Why is there rust in my new kitchen sink? Reasons: 1.1 The rust may be caused by the welding cement, or oil residue on the sink which when not cleaned on time can lead the sink to rust. 1.2 Chemical cleaning agent, paint, sauces or cooking oil left in the kitchen sink after a certain period of time these will create molds and the molds would stick on the surface. Prevention and Treatments: 1.
DO 1. Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some wash-er-fluid is advisa Remember to wipe it dry. 2. Remember to rinse the sink after using any cleaning agent and wipe dry. If any mineral deposits built the sink, clean up it as soon as possible. 3. Properly remove the rust, molds or scratches with a scouring pad. Rubbing the sink in the direction of grain. 4. Rub it lightly with a soft towel in the direction of grain lines. 5. Keep the sink dry after you use it.
STAINLESS STEEL KITCHEN SINKS General Recommendations: Check all the matching products inside when opening the package. Inspect your sink for any noticeable damage before installation. Read the installation and maintenance instruction thoroughly before installation. Consult your cabinet dealer before custom order cabinet for the sink. suggests using experienced and professional installers. does not responsible for any damage to countertop, sink fixture, faucet and personal injury during installation.
