OWNER’S MANUAL Model AC320 Baby Video Monitor Model AC327 Baby Movement Monitor, with Video Model AC337 Baby Movement Monitor, with Video WARNING Keep user’s guide for future reference. Please read the warnings and safety instructions carefully before assembling & using the product. Failure to follow the warnings and the instructions could result in serious injury or death or damage to the product.
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use WARNINGS 1. Because of the serious strangulation risk to infant & toddlers, parents & caregivers should note the following Warnings WARNING - Strangulation Hazard – Children have STRANGLED in cords • KEEP the Nursery Unit and adapter cords OUT of the reach of children more than 3 feet or 1 meter away NEVER use extension cords with adapters.
provide the supervision necessary for the continued safety of your child • Use this appliance ONLY for its intended use as described in this manual 15. The Sensor Pad is not intended to be used to determine if a child is out of the crib 16. ALWAYS be sure to immediately check on baby whenever an alarm sounds 17. Keep cords out of the reach of ANY children 18. ONLY use the chargers and power adapters provided.
be easily accessible. Make sure to plug the adapter to the socket outlet nearest to the equipment and that is easily accessible. To disconnect from mains, unplug the adapter 41. Only use attachments/accessories and replacement parts specified by the manufacturer. Any mounting of the product should follow the manufacturer’s instructions • DO NOT position this product on an unstable cart, stand, tripod, bracket or table.
1- SETTING UP THE PARENT UNIT E N 2 1 3 8H Charge the Parent Unit 8 hours prior to first use Regular charging time is 4 hours 2- SETTING UP THE SENSOR PAD (ON MODEL AC327 AND AC337) 1. Remove the battery cover and insert the battery face with + face up 1 2. Replace the battery cover, align 2 dots and click to secure 2 3 3. Remove the mattress from the crib, place Sensor Pad - Angelcare® logo side up - on base in centre of mattress.
IMPORTANT • If your crib does not have a solid, stationary, completely flat, firm surface including a spring or slat base, place a hardboard between the crib base and the Sensor Pad, to ensure correct operation. The hardboard support must measure at least 30 x 30 cm (12” x 12”) and 6 mm (1/4”) thick.
4- TURNING ON YOUR MONITOR NURSERY UNIT PARENT UNIT E N Note: • Your Nursery Unit and Parent Unit come pre-paired • Each time you power ON your Nursery Unit, the internal thermometer will need to calibrate to ensure accuracy. This automatic process will take approximately 30 minutes PAUSING AND RESTARTING THE SENSOR PAD NURSERY UNIT PARENT UNIT • Allows you to pause the Sensor Pad if you remove baby from the crib, e.g. for feeding or comforting.
IMPORTANT • Test your monitor before first use • Prior to use and on a regular basis (before placing your child in the crib) always check the Sensor Pad is detecting no movements or vibrations in its environment • Test your monitor every time you move the Sensor Pad to a different place 5- GETTING TO KNOW YOUR MONITOR NURSERY UNIT 1 Speaker 2 Microphone Camera Lens 3 Power indicator (on model 4 AC327 & AC320) Temperature Indicator 7 6 1 2 3 (on model AC337) 5 Micro USB charging port 6
TOP STATUS BAR 11 16 17 18 E N 1 2 3 12 9 10 13 8 4 14 5 15 6 7 (on model AC327 and AC337) 1 Sensor Pad movement detection is activated 2 Sensor Pad alert 3 Sensor Pad lost link 4 Sensor Pad movement detection is OFF 5 6 7 8 9 10 11 Sensor Pad is paused Sensor Pad is low battery Sensor Pad has never been paired Nursery Unit selected and broadcasting sound 14 Night vision is activated 15 Sensor Pad low battery indicator (on model AC327 and AC337) 16 Volume level indi
IMPORTANT • To confirm your settings, you’ll always need to press the button.
ALERTS ICONS 1 1 (on model AC327 and AC337) 1 1 1 2 1 3 Sensor Pad alert: If after 20 seconds there is NO movement detected both the Parent Unit and Nursery Unit speakers will emit loud consecutive beeps - this is the movement alarm 2 Sensor Pad is paused 3 Sensor Pad lost link: Parent Unit and Nursery Unit speakers will emit loud consecutive beeps 1 4 1 5 E N 1 6 7 4 Parent Unit is out-of-range: Parent Unit will emit 3 consecutive beeps, every 10 seconds 5 Temperatur
WEAK RECEPTION • Bring units closer together. • Change the position of one or both units. • Place units on a flat surface away from baby’s reach. • Recharge the Parent Unit. STATIC, DISTORTION, INTERFERENCES (FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC.) • Rotate Parent Unit or move it away from source of interference. FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT) • Move units further apart (at least 10 feet (3 meters)). • Decrease volume on Parent Unit.
LOSS OF CONNECTIVITY BETWEEN THE NURSERY UNIT AND PARENT UNIT • If your Nursery Unit becomes un-paired from your Parent Unit, please follow the steps below to re-pair them. 1. Turn ON the Parent Unit and keep the Nursery Unit OFF 2. Press Menu button E N 3 3. It will directly jump to General setting menu. Select the Pairing Icon and press VOX 4. In the Pairing Menu, select Nursery Unit 1 Icon and press • If Nursery Unit 1 is marked as connected select it to go the Nursery Unit 1 Pairing option.
CUSTOMER CARE - LIMITED WARRANTY Angelcare® warrants to the original owner of this product that Angelcare® monitor is free from any material and workmanship defects for the term of the warranty period (see warranty table below to determine the warranty for your country). If this monitoring system fails to function properly when used as directed under normal conditions and during the warranty period, Angelcare® will either repair or replace the product, at our discretion, free of charge.
TECHNICAL SPECIFICATIONS Range: Open field (Open area without obstructions): • Between the Nursery Unit and the Parent Unit: up to 820 feet (250 meters) • Between the Nursery Unit and the Sensor Pad: up to 20 feet (6 meters) Number of Channels: 19 channels. Thermometer Guidelines: High Temperature Alarm: 72°F (22°C) Low Temperature Alarm: 60°F (16°C) Power Supply: 1 included Li-Ion battery 1300 mAh 3.7V (manufactured by Icon Energy System (Shenzhen) Co Ltd) for the Parent Unit 2 x 100-240 V AC / 5V DC 0.
FCC AND IC WARNING Industry Canada (IC) – This device contains license‐exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license‐exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Contact information IMPORTANT! This Angelcare® monitor is a personal care product. Please do not return this product to the store. If you have questions or need help, please call your distributor before returning this product. We, at Angelcare®, stand behind all of our products. If you are not completely satisfied or have any questions, please contact your distributor before returning this product: United States and Canada: Please contact us at: info@angelcarebaby.
