DDL-M1 Intelligent Microscope Operating Instruction V1.
Contents Notice for Use.....................................................................................................................................3 Product Introduction........................................................................................................................... 4 Microscope Installation Instructions.......................................................................................... 4 Microscope Stand Installation Instruction......................................
Notice for Use Please read this manual carefully and use it correctly. Pay attention to the protection of the lens part,be sure to close the lens cover after use,to avoid dust or foreign matter. This microscope can be used by hand,or can be inserted into the base as a table.Pay attention to the strength of the insertion to avoid damaging the components. When placing the specimen,please pay attention to the position,and place it as far as possible in the center of the lens right below.
Product Introduction 偕 Microscope Installation Instructions Microscope Structure Microscope monomer Microscope base 4
偖 Microscope Stand Installation Instruction Step 1. Remove the cover of the Step 2. Hand strap facing the rear,the rear microscope monomer lens. slot should be aligned with the mounting hole. Step 3. Holding the base with one hand, insert the microscope monomer vertically Step 4. Insert it to the bottom (focus wheel is all exposed). down into the mounting hole.
偗 Charging Instruction The indicator light on The indicator light on microscope monomer microscope base When the microscope monomer is low battery,the power indicator blue light When the microscope base is low battery,the power indicator light flashes quickly. flashes red. The red light is always on when charging,and the indicator goes off when The red light is always on when charging,and the great light is full. always on when full.
偘 Microscope Monomer Introduction Focus wheel: Counterclockwise rotation: zoom in Clockwise rotation: zoom out (Notice:There are two magnifications to rotate the focus wheel at the same distance.Lifting knob on the base and magnification /minification button can also be adjusted for multiple,when adjusted the focus wheel,lifting knob and magnification /minification button together,the maximum magnification is 400 times.
Power button: Long press the button for 3s,and the light on the microscope monomer or the light on the microscope base will light up,which means the microscope has been turned on.Press for 3s again,when the light goes out,means the microscope has been turned off. Power/WiFi connection indicator: When the battery is low,the blue light flashes quickly.When charging,the red light is always on.The blue light is always on when WiFi is successfully connected,and the blue light flashes when WiFi is not connected.
偙 How to Use the Microscope Hold the upper part of the microscope with one hand, the tip of the finger can be put Turn on the microscope by pressing the power button. into the hand strap to avoid falling. Connect the microscope and mobile app via WiFi. Remove the lens cover.
Align the lens of the microscope at the object to be observed. Rotate the focus wheel with the other hand and observe the display of the phone.At this time,you can adjust the focus wheel to the best viewing ratio.
做 Microscope Base Introduction Opening and closing the microscope base Turn the light brightness knob clockwise and hear a “click”,the observation window will light up,which means the microscope base has been opened. Turn the light brightness knob counterclockwise and hear a “click”,the observation window will go out,which means the microscope base has been closed. (Note: After the microscope base is closed,be sure to close the microscope monomer and cover the lens cover at the same time.
Specimen holder: Fix the specimen or observe the object. The holder adopts magnetic suction type,which can be adsorbed in place as long as it is close to the mounting part of the base. The bottom of the specimen holder and the adsorption position of the base are cleaned regularly to avoid adsorption of other metal substances. Observation Window Introduction The observation panel should be cleaned regularly to avoid oil stains,which may affect the observation experience.
ߗ How to Use the Microscope Base Place the microscope on a stable table and avoid shaking or falling. Turn on the microscope monomer and base.
Connect the microscope and mobile app via WiFi. Adjust the microscope lifting knob,so that the microscope monomer is at a appropriate height,easy to place the object of observation.
Place the observation object on the bottom observation Rotate the focus wheel and observe the display of the phone.At this time,you can slowly adjust panel and place it in the to the best observation magnification.(Adjust center of the reticle of the the observation height and focal length to observation panel.(Be sure to achieve other multiple observations.) make the side with the cover glass face up,and don't put it upside down.
ߘ Accessories and tools (Notice ˖ If you purchased the simple version,the accessories only contains 5 biologic section specimens,5 blank slides,data cable and 2 specimen fixation clip.
APP Usage Guide 偕 How to Use on Android/iOS Step 1: Download APP IOS: Search iWeiCamera in the App store,download and install it,or scan the following QR code to select IOS version for installation. Android: Scan the following QR code to select Android (Google play) version (international user) or Android (China) version (Chinese user) download and install it;or input the following URL in the browser download and install it.
Step 2: Turn on the microscope Long press the Power button 3s,when the blue indicator light is flashing,which means the device is turned on. Step 3: Connect the microscope to IOS/Android device Open the smartphone’s WiFi setting,find the name of WiFi :wifi_camera_wifi30_xxxx,click to connect,then run APP, you will see the main interface at this APP.
偖 How to Use on PC For Windows Step 1 Download Software Please login https://soft.hvSCam.com,click the third link and download the software,then click the Next stepĺReceiveĺInstallĺFinish. (Notice:If you were Win10 system,this software is not necessary,you can directly search Camera in Windows for find it and click on.
Step 2 Run Āamcap”,you will see the below interface after enter the app: Step 3 Connect the device with PC via USB cable,then long press Power button 3s to turn on the device.
Step 4 Click “Devices” in menu bar,then click “USB CAMERA” to select the microscope equipment name: 21
For MAC Step 1 Download Software Please login https://soft.hvSCam.com,please select the HiViewSetup1.4 for mac.
Step 2 Double click and open HiView, The following information will appear. Then, click next step˖ Connect your microscope to a mac computer or laptop via the USB cable.
The solution is as follows˖ System Preference Open the Security & Privacy,select General and AppStore and identified developers. Select “Open Anyway” The opening interface of software Allow HiView below to access is as shown in the figure. your camera.
Step 3 Software Home Page 25
Microscope Trouble Shooting PROBLEM WHY SOLUTION In the process of charging the current is Heating during charging large and the battery calorific value is A normal phenomenon. high,which is a normal phenomenon.
PROBLEM WHY SOLUTION ķThe interface is not plugged tightly ķPlug interface again The device cannot connect to the ĸThe data cable is damaged ĸReplace the data cable computer software terminal ĹThe connecting cable with data ĹReplace the data cable with data transmission transmission function is not used function before connecting to use Ambient temperature changes Wait for the temperature to stabilize,use it after The lens showed a blurred image dramatically,causing the lens to fog the fog
Product Performance failure table Name Performance failure The microscope monomer cannot turn on The microscope monomer light doesn’t work Microscope monomer The microscope monomer cannot be focused The microscope monomer cannot connect with APP Unable to charge properly The base can’t turn on Microscope base Unable to charge properly The illuminating/dimming button doesn’t work properly (Notice: The product,accessories,user interface and other illustrations in the manual are schematic diagrams for re
Storage Environment Story in cool and dry place for daily use,avoid direct sunlight. Avoid storing microscopes in places where there is a risk of falling,which may cause lens deviation or other damage to the microscope,as well as other irreparable damage.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
