A6 Lite 5" Full HD On-camera Monitor Support 4K HDMI Input/ Output User Manual
Product Overview Thank you for choosing Andycine A6 Lite Full HD camera monitor, which adopts advanced integrated digital signal processing circuits and professional IPS LED panel, which makes it high brightness, low power consumption, stable performance, etc. It is equipped with HDMI input and output, which make it wide application, casing compact, simple operation, portable convenience and strong compatibility.
● Keep the product away from the heat source, such as the radiator, the water heater, the stoves and the other heating products. ● Avoid the prolonged exposures to the sun as the LCD screen will be damaged. ● To avoid damaging the product, please do not take apart or repair the unit by yourself without the adjustable components in the unit. ● To maintain the LCD screen better, please notice the ways as below to avoid the scratch, the discoloration and the other damages. 1.
Features ● IPS LCD panel, support 4K HDMI input and output UHD 4K 3840×2160p (30/29.97/25/24/23.
CONTENTS 1. Product Description ----------------------------------------- 5 1.1 Button Instruction --------------------------------------------- 6 1.2 Port Instruction (bottom) ------------------------------------ 6 1.3 Port Instruction (left) ----------------------------------------- 7 1.4 Power Input ----------------------------------------------------- 7 1.5 Mount Points --------------------------------------------------- 8 1.6 Sunshade ------------------------------------------------------- 9 2.
1.
1.1 Button Instruction Button Function when OSD is Function when OSD is not displayed displayed F1 Custom button F1 / F2 Custom button F2 / < Decrease the volume Decrease or adjust value of selected parameter > Increase the volume Increase or adjust value of selected parameter MENU Display OSD Main menu Return to previous OSD menu ∨ / Select next menu item ∧ / Select previous menu item Power On/Off button 1.2 Port Instruction (bottom) DC OUT 8.
available DC coupler via adaptor (like NP-FW50 Sony & LP-E6 Canon&DMW-BLF19 Panasonic). : 3.5mm Earphone port output USB UPGRADE: Firmware USB upgrade port 1.3 Port Instruction (left) HDMI IN: V1.4, HDMI signal input, up to 4K@30Hz. HDMI OUT: V1.4, HDMI signal output, up to 4K@30Hz. DC IN 12V: DC power input interface, polarity as the input power 1.
Remark: Different specifications of the battery have different capability. The working time for the monitor will be different. Higher capability (working time) will be longer. Please take off the battery from the monitor if you don’t use the monitor in a long time. 1.5 Mount Points (1) 1/4" Screw Lock Installation The 1/4 screw lock can be installed on the monitor (bottom, right side). ① Fasten the 1/4" screw lock with the monitor. ② Use 2 screws to fasten the1/4" screw lock and the monitor.
1.6 Sunshade ① Velcro ② Sunshade Frame (Paste Velcro) ③ Sunshade ④ Sunshade Application Attach the Velcro (hook side) ① to the outside of the sunshade frame of the monitor, open the sunshade ③, and align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) ② on the monitor sunshade frame, and then complete the sunshade installation ④.
2. Menu Operation Instruction After correctly connect to the power supply, the indicator will turn (Red), press to turn on monitor power, the indicator will be Yellow, and then input HDMI signals, the indicator will turn Green from Yellow. 2.1 Press “MENU” button to enter OSD main menu, and press “<” or “>” button to go through the secondary menu function. 2.2 Then press “∨” button to enter secondary menu (cursor move to secondary menu position).
3. Menu Function Instruction Image (Including 2 pages) ★ Pic. Mode: Standard, Mild, User, Dynamic Select ‘user’ to adjust Brightness, Contrast, Saturation, Sharpness. ★ Brightness: 0~100 To adjust image's brightness.
proportion too high or too low will make the picture lose the color. ★ Saturation: 0~100 To adjust color concentration. ★ Sharpness: 0~100 Also called ‘Resolution’, is an indicator for the image plane definition and image edge sharpness. If sharpness is higher, then the details contrast on the image is higher, the image is more clearly. ★ Color Temp.: 6500, 9300, User Select image white color temperature of the monitor.
★ Language: English, 简体中文, Español, Português, Français, Nederlands, Deutsch,日本語, 繁體中文 To select the display menu language. ★ Aspect Ratio: Auto., 4:3, 16:9, Just Scan, Panorama, P2P To select the image aspect ratio. ★ No Signal: Blue Screen, Red Screen, Green Screen, Black Screen, White Screen To select the screen background color when no signal. ★ OSD Trans.: Off, Low, Middle, High The transparent of image background when menu display. ★ OSD H: 0~100 To adjust the OSD position in horizontal.
★ Power On: Auto., Manual When select the Auto., the monitor will turn on when input power. But if select the manual, it is standby when input power, need to press button to turn on the power. ★ USB Upgrade When need to upgrade the native data application software, copy the file to the U disk, connect the USB cable with upgrade USB port, press “>” button to confirm. After the upgrade, monitor will automatically restart. ★ Reset Press “>” button to confirm, back to original setting.
(To achieve this function, you need to first open the Nine Grid function.) ★ Zoom: Off, 4X, 9X, 16X Image Zoom function, to help the photographer observe more careful image by changing it. ★ Zoom Mode: Off, Mode1, Mode2 Zoom All, L/R Zoom, U/D Zoom can be customized. Zoom All: 0~100 To adjust the image to zoom in or zoom out. L/R Zoom: 0~100 To adjust the proportion of the image Left and Right to Zoom In or Zoom Out. U/D Zoom: 0~100 To adjust the proportion of the image Up and Down to Zoom In or Zoom Out.
Function (Including 3 pages) Menu of Page One ★ Center Marker: Off, On To set center mark (cross mark) display. ★ Safe Frames: Off, 80%, 85%, 90%, 96%, 93%, 2.35:1 To select the screen marker. ★ Nine Grid: Off, On To make the image segmented into nine grids. ★ Image Freeze: Off, On The current picture still (capture function). ★ Image Flip: Off, H_V Flip, H Flip, V Flip Image Flip function. ★ OSD Flip: Off, On After turning on the Image Flip, turn on this function again to achieve the OSD Flip function.
the real proportion of scene. Under the "user" adjustment item, the Anamorphic nX can be customized. ★ Anamorphic nX: 1.20X~2.00X Customizable anamorphic adjustment is available. Menu of Page Two ★ Check Field: Off, Mono, Red, Green, Blue To switch among Color, Mono, Red, Green, Blue. ★ Histogram: Off, On It stands for the image pixels numbers in each level of brightness and shows the brightness distribution of pixels in the image.
focusing operation. ★ Peaking Color: Red, Green, Blue Due to the image color is colorful when shooting in natural light, so the user may react to the edge of the single line not too sensitive, at this time to change the auxiliary focal edge line color will improve the sensitivity of the image contour. It is convenient during filming tracking in focus. ★ Over Exposure: Off, On To turn on or off this function.
Menu of Page Three ★ Ratio Marker: Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1 Image display ratio marker. ★ Mark Color: Red, Green, Blue, Black, White To select the above high contrast mark color according to different image. ★ Mark Width: 1~7 To select the above mark color display width. ★ Modified Mark: 0~6 Adjust the brightness of the image outside tag line to highlight the inside tag line of image.
Custom Button Setting F1~F2 ★ F1/ F2: Center Marker, Safe Frames, Check Field, Focus Assist, Aspect Ratio, Image Flip, Image Freeze, Histogram, False Colors, Over Exposure, Embedded Audio, Nine Grid, Zoom, Anamorphic To set the 2 shortcut custom button F1, F2 on the panel. For example: When in OSD menu “ ”, press “∨” button to select F1, press “<” or “>” button to pop-up function items and press “∧” or “∨” button to select one of them, such as “Focus Assist”, and press “MENU” button to confirm.
4. Technical Parameters Panel Size 5.0 inch IPS Resolution 1920 x 1080 pixels Pixel Density 440 PPI Dot Pitch 0.0571 (H) x 0.019 (W) mm Aspect Ratio 16:9 Brightness 450cd/m2 Contrast 1000:1 Viewing Angle 80°/80°(L/R) 80°/80°(U/D) Backlight LED Input HDMI Output HDMI, DC OUT 8.4V Audio 3.5mm Stereo Headphone (3.5mm outer, 1.1mm inner) 480i /480p /576i /576p 720p(60/59.94/50/30/29/25/24/23.98) HDMI Support Format 1080i(60/59.94/50) 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.
5. Trouble Shooting 5.1 Only black and white or monochrome picture: ① please check saturation, brightness & contrast adjustment. ② Please check "Check Field" is in black, white or monochrome image or other condition. 5.2 NO Image after put on the power ① Check if signal cable connecting is in good condition. ② Check signal cable connecting, and make sure to use the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged. 5.