FCC ID: KUWSA1900-1H EXHIBIT D INSTRUCTION BOOK A. INSTRUCTION BOOK: The User’s Guide for this product has been included as Exhibit D.
FCC ID: KUWSA1900-1H USER'S GUIDE for the SELECT AMP CDMA1900-1H COMA CHANNELIZED AMPLIFIER SERIES MANUAL NO. AE02B-A3602 REVISION -The information set forth in this document and all rights in and to inventions disclosed herein, and patents which might be granted thereon disclosing, employing or covering the materials, methods, techniques or apparatus described herein are the exclusive property of Andrew Corporation. This document is an operation and maintenance manual.
cua Pst i AE02B-A3602 Rev — NCE Got CHAPTER 4 MAINTENANCE MAINTENANCE PROCEDURES The Select Amp contains no user-serviceable parts. Ta verify operation check the amplifier against the electrical specifications provided in Chapter 1.
7 AE02B-A3602 Rev ~ 5 _ FUNCTIONAL DESCRIPTION 3.2.7 Battery Back Up Option The battery back up (BBU) provides emergency operating power in case of AC power loss. Under normal conditions, the BBU is charged by an internal charger. If AC power loss occurs, the BBU automatically comes on-line and this condition is reported to the status and control module. The BBU will power the Select Amp for approximately two hours.
AE02B-A3602 Rav — FUNCTIONAL DESCRIPTION 3.2.3.2 Up converter The up converter board mixes the filtered 140 MHZ IF with a signal from the synthesizer and outputs the same frequency that was input to the down converter. Like the down converter, each up converter path consists of a mixer and two gain stages. The DC current draw of each gain stage is monitored by a window comparative. The window comparative indicates a fault, if the gain stage has an open or short condition, 3.23.
we ps AE02B-A3602 Rev ~ prc. type OPTION CHAPTER 3 FUNCTIONAL DESCRIPTION 341 --OVERVIEW The Select Amp Channelized Amplifier accepts a broadband input in the 1850-1910 MHz up link and 1930-1980 MHz down link bands, and selectively passes one COMA discrete channel in each band while rejecting the others. This is accomplished by down converting the desired signals to a 140 MHZ IF and using narrow band SAW filters to provide adjacent channel rejection. 3.
ar 3 is AE02B-A3602 Rov — OVERVIEW NSE Tattooist CHAPTER 2 OPERATIONAL OVERVIEW OVERVIEW The Select Amp channelized amplifier accepts a broadband input in the 1850 1910 up link and 1930 .1990 MHz down link bands, and selectively passes one COMA discrete channel in each band while rejecting the others. This is accomplished by down converting the desired signals to a 140 MHz intermediate frequency and using narrow band SAW filters to provide adjacent channel rejection.
AE02B-AJ603 Rev oo unsavory dR CRETIN = 14620 : 12.000 = red 4 11.600 12470 ie 16.
AE02B-A3602 Rev —FCC ID: KUWSA19BESGRPTION 13 MECHANICAL SPECIFICATIONS Table 1-2 below contains the mechanical specifications for the Band Selective Amplifier. Size Amplifier: Height: 41 cm (16.3 inches). Width: 31 cm (12 inches). ~ Depth: 31 om (12 inches). (Excluding heat sinks, connectors, handles, and feet) Weight Amplifier. 55 Ibs (25 kg). Mounting Four holes spaced (296 x 371 mm) (11.6 x 14.62 inches). Hole diameter = 0.453 inches. Power Connections +24 VDC (seven meter cable supplied with unit).
re AE02B-A3602 Rev — roc 10s xuwsaLoBERGRPTION CHAPTER DESCRIPTION 1.1 OVERVIEW The Select Amp CDMA1900-1H bi-directional channelized amplifier provides selective frequency amplification of user specified frequencies in the 1850 1910 MHz Up link and 1930 -1990 MHz Down link PCS bands. This unit will selectively filter for one 1.25 MHz COMA channel in the Up link and Down link band as determined by the operator.
AE02B-A3602 Rev. — ECC TD: KU TENTS TABLE OF CONTENTS CHAPTER 1 DESCRIPTION. 1.14 1.2 ELECTRICAL SPECIFICATIONS. 1.3 «+ MECHANICAL SPECIFICATIONS 1.4 ENVIRONMENTAL SPECIFICATIONS 1.5 TECHNICAL ASSISTANCE 3 Ga PRA CHAPTER 2 OPERATIONAL OVERVIEW. 2-4 2.4 OVERVIEW. 2-1 2.2 RF DISTRIBUTE 2-1 23 POWER DISTRIBUTION 2-1 24 CONTROL DISTRIBUTION .. 2-1 CHAPTER 3 FUNCTIONAL DESCRIPTION. 34 3.1 OVERVIEW. 3-1 3.2 FUNCTIONAL 31 3.2.1 3-1 3.2.2 Attenuation 3-1 3.2.3 31 3.2.3.1 Down converter. 3-1 3.2.3.2 Up converter.
AE02B-A3602 Rov. ECC ID: Lucretius SUMMARY SAFETY SUMMARY High voltage is used in the operation of this equipment. Death on contact may result if personnel fail to observe the following safety precautions: « Do not be misled by the term "Low Voltage.” Potentials as low as 50 volts may cause death under adv Else conditions. » Do not crush, puncture, disassemble, or otherwise mutilate batteries. Leaking batteries can cause serious damage to equipment and injury to personnel.
Rum AE02B-A3602 Rev. — AGES LIST OF EFFECTIVE PAGES Dates of issue for original and changed pages are: “ Original Orin 21 Dec 1998 TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 42 CONSISTING OF THE FOLLOWING: Change No.