What's in the box ANT-950 Carry Headphone Case — = USB Charging 3.5mm Audio Cable Cable C€ X XX Bluetooth CALL SUPPORT 800.442.
Thank you for purchasing the Andrea Communications ANT-950 Wireless Bluetooth® Stereo Headphones with Active Noise Cancellation (ANGARA. We hope you enjoy them! This instruction manual will get you started and help you make the most of your new headphones. Andrea Communications ANT-950 Stereo Headphones offer clear, full-bodied sound with wireless Bluetooth® operation. + Pair the headphones with any Bluetooth® capable device to listen to music tirelessly. + Use the 3.
LED Green LED lights when ANR Is tumid on Red LED lights when headphone Is charging Blue/Red LED flashes quickly when in pairing mode Blue LED flashing slowly Indicates paired In Bluetooth® mode {2) [5] ANR ON/OFF BUTTON Green LED lights when ANR Is muted on {BUTTONWOOD (4) CJ BUTTON Short press next song track Short press previous song track Long press volume up Long press volume down {5) USB CHARGING JACK Red LED lights when headphone is charging LED goes off when Headphones are charged {6) AUXILIARY 3.
CHARGING YOUR HEADSET Make sure that your headset is fully charged for two hours before you begin using it. Plug it into the USB port ‘on your computer (with the included charging cable} or use an AC power supply (not included} to charge from an electrical outlet. When the battery indicator has a solid red light, your headset is charging. When the headset is fully charged, the battery indicator shuts off. TURNING YOUR HEADSET ON AND OFF Press the BI button for 3 seconds.
AUXILIARY MODE The ANT-950 can be used in Auxiliary Mode. Plug the 3.5mm audio cable into the 3.5mm jack on the headphone. When the cable is plugged in Bluetooth mode turns off and blue LED will not be lit. When in auxiliary mode you can plug your ANT-950 into any headphone jack on computers, laptops, tablets and other devices Including airline seats. The ANR function can still be used when in auxiliary mode.
A warning /N\ For your comfort, health, and safety, do not use headphones at high volumes for extended periods of time. Doing so can cause permanent hearing loss. Always listen at moderate levels. Do not use while driving, cycling, operating machinery, or during any activities that require you to hear the sounds around you. To prevent hearing damage, it is recommended that you turn the volume all the way down before muting off the headphones.
SPEAKER SPECIFICATIONS POWER SPECIFICATIONS # Size: 40mm Diameter + Battery type: Li-ion + Frequency range: + Battery Capacity: 250mAh « Impedance: 260+15% Playing time: § hours + Sensitivity: 96dB+3dB + Charging Time: 2 hours + Rated power: 30mw + Standby time: 120 hours + Maximum input power: 150mwW BLUETOOTH® SPECIFICATIONS + Bluetooth Version: + Frequency: + Active cancellation: + Transmission power: DBMS, Class + Transmission Distance: 10m/ effect + Talking Time: About & hours «Music playing time: Abou