Espresso Cocktail Table Assembly Instructions Max Top Load 80 lbs. Max Load Inside the Trunk 100 lbs.
Espresso Cocktail Table Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below.
H 8 PCS 8 PCS ϕ8 x 30mm Dowel N 1 PC 2 PCS Bolt 8 PCS ϕ ¼” x 2 ¾” O R Right Support Handle T L 2 PCS Hinge Care and Cleaning Instructions: Before using, wipe with a clean dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required No.2 Phillips Screwdriver J 1 PC Wrench 1 PC M Screw 35 PCS ϕ 3.
Espresso Cocktail Table Assembly Instructions PLEASE DO NOT OVER-TIGHTEN CAMBOLTS. PLEASE STOP WHEN YOU FEEL TIGHT Step 1: Put all parts on a soft surface to prevent scratches. Attach handle-A (O) to the top (A) using screws (M) and tighten with Phillips screwdriver as shown. Step 2: Attach handle-B (P) to front panel (B) using screws (M) and tighten with Phillips screwdriver as shown. Step 3: Screw small cam screws (H) into front panel (B) as shown.
Step 4: Attach handle (Q) to left side panel (D) and right side panel (G) using screws (M) and tighten with phillips screwdriver as shown. Step 5: Screw small cam screws (H) into back panel (C) as shown. Step 6: Insert dowels (K) into left side panel (D) and right side panel (G) as shown. Assemble left side panel (D), right side panel (G), front panel (B), back panel (C) and bottom panel (E) together using small cam screws (H), small cam locks (I), dowels (K) and sponge cushions (S) as shown.
Step 7: Turn the trunk base upside down and attach legs (F) to the bottom of trunk using screws (L) as shown. Step 8: Attach Hinge (T) to back panel (C) and top panel(A) by using screws (M) as shown and then tighten all screw by phillips screwdriver(not included) Step 9: Attach left support (N) and right support (R) to the top (A) and trunk base using screws (M) and tighten with Phillips screwdriver as shown. Then put sponge cushions (S) on front panel (B) as shown. Close the top. Top will close slowly.
Parts Parts Replacement Replacement Form Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product.