Installation & Assembly

Installation Instructions for

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

SAVETHESE INSTRUCTIONS!

ENERALGPRODUCT

INFORMATION:

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent dimmer.

LED version may be dimmed with a LED dimmer. Consult lamp

manufacturer for additional information.

This instruction shows a typical installation.

PAGE 1
Installation Instructions for CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Incandescent version may be dimmed with a standard incandescent dimmer.
PAGE 2
Install the Fixture 1A LAMP 7 COLLAR NUT TOOL OUTER SHADE 6 COLLAR NUT JUNCTION BOX MOUNTING FIXTURE BASE PLATE 6 WHITE WIRE NEUTRAL WIRE INNER SHADE 1 3 CAP NUT 6 5 SOCKET SHADE BASE 5 4 HOT WIRE BLACK WIRE MOUNTING PLATE STUD SPACER 6 1 MOUNTING SCREW 1 Secure the mounting plate to the junction box. 2 Connect the fixture to a suitable ground in accordance to local electrical codes. 3 Connect the white fixture wire to the neutral power line wire with a wire nut.