User's Guide

ManualsBrandsAndersen ManualsElectronicsINTRUSION DETECTOR SENSOR

User’s Guide

Eagle

Window & Door is proud to introduce VeriLock™ integrated security sensors, an innovative security option

that integrates wireless security sensors into Eagle

window and door products. The sensors, when ordered, are

embedded within our windows and doors and can detect when the product is open or closed. The sensors also

detect whether the product is locked or unlocked, something other security sensors are not able to do. This

enables a simpliﬁed “check the windows and doors routine” at bedtime or departure. Additionally, all Eagle

sensors, when used with a third party security and monitoring system, can be monitored and armed, even when

you’re not home.

With integrated sensors, the beauty of Eagle products is maintained without unsightly wires, sensors or holes.

Plus, the product warranty is maintained. Generally, third party security systems can void the manufacturer’s

warranty with the installation of sensors and wires on windows and doors.

Eagle windows and doors with VeriLock integrated security sensors are designed to work in conjunction with a

security system that is compatible with Honeywell

5800 Series transmitters installed and monitored by a

reputable security dealer.

When properly integrated into a third party security

system, Eagle’s VeriLock sensors are designed to:

• Detect whether your Eagle window or door is open

or closed

• Detect whether your Eagle window or door is

locked or unlocked

• Communicate changes in open/close and lock/

unlock wirelessly in a format compatible with

Honeywell 5800 Series transmitters

• Monitor sensor battery level and communicate low

battery state in a format compatible with

Honeywell 5800 Series transmitters

• Deliver comparable range to other wireless

sensors based on Federal Communications

Commission (FCC) regulations that limit RF

transmit power levels

To experience the full beneﬁts of VeriLock sensors,

an experienced security system dealer is required to:

• Select and install a security system compatible with

Honeywell 5800 Series transmitters

• Specify a system to accommodate the number of

Eagle windows and doors in the dwelling

• Congure each VeriLock sensor into the specied

security system, as each sensor has its own unique

identiﬁcation code permanently assigned

• Program the security system using Eagle’s

recommended zone descriptors

• Adjust the system for wireless range deciencies

due to size or layout of home through the use of

wireless repeaters and/or additional wireless

receivers

Eagle Window & Door is not afﬁliated with Honeywell. Eagle’s VeriLock sensors are independent of the security

system, yet communicate with it to provide added features and beneﬁts for windows and doors that only Eagle can

offer.

VeriLock

User’s Guide

for Eagle VeriLock™ Integrated Security Sensors

“Eagle” and all other marks denoted are trademarks of Eagle Window & Door Manufacturing, Inc. and its parent company. “Honeywell” is a registered trademark of

Limited Publication Release

Summary of content (20 pages)

PAGE 1
User’s Guide User’s Guide for Eagle VeriLock™ Integrated Security Sensors VeriLock TM Limited Publication Release Eagle Window & Door is proud to introduce VeriLock™ integrated security sensors, an innovative security option that integrates wireless security sensors into Eagle® window and door products. The sensors, when ordered, are embedded within our windows and doors and can detect when the product is open or closed.
PAGE 2
User’s Guide Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
User’s Guide Double-Hung, Single-Hung and Monumental Single-Hung Windows Operating Instructions How Sensors Work Lock Lever Sensors are integrated within the locking mechanisms. When properly configured into the security system, a sensor within the lock signals when the window is in the closed position. When the locking mechanism is engaged, a second signal is sent to the control panel indicating that the window or door is locked.
PAGE 4
User’s Guide Verification Instructions 1. Open window/door and look for a “FAULT” message associated with window/door open on keypad. FAULT 10 KITCHEN WINDOW OPEN ARMED 1 OFF 2 AWAY 3 STAY READY 4 MAX 5 TEST 6 BYPASS 7 INSTANT 8 CODE 9 CHIME READY 0 # Example of Keypad Monitoring Device 2. Close window/door and look for a “FAULT” message associated with window/door unlocked on keypad.
PAGE 5
User’s Guide Battery Information Battery Type: provided by the Eagle limited warranty for VeriLock™ integrated security sensors. Lithium Coin Cell Battery Battery Size and Quantity: Batteries carry the risk of fire, explosion and burns. Do not recharge, disassemble, heat above 212 degrees F (100 degrees C) or incinerate. Dispose of used batteries promptly and properly. Keep away from children.
PAGE 6
User’s Guide Battery Replacement Instructions Batteries are small parts and, if swallowed, could pose a choking hazard to young children. the battery tray is facing upward. Continue to fully push the battery tray in. The battery tray will encounter several points of light resistance as the batteries contact the sensor. When replacing the battery, do not touch any of the circuitry on the sensor. Static from your body could damage the sensor. 8.
PAGE 7
User’s Guide Battery Replacement Instructions - continued Double-Hung and Single-Hung Windows Before you begin battery replacement, place a freestanding object, such as a chair, under the window to support the lower sash while tilted. 1. Unlock the lower sash by rotating the lock levers partially toward the center (to the “unlock” position on each sash lock cover). 2. Lift the sash about 3 inches. Double-Hung and Single-Hung Windows Exterior Side Up Lower Sash Battery Tray 3.
PAGE 8
User’s Guide Battery Replacement Instructions - continued Monumental Single-Hung Windows Monumental Single-Hung Windows 1. Close the unit (upper and lower sash) and lock the left sash lock. 2. Battery Tray Remove the plastic/metal screw cap on the right lock lever using a small flat head screwdriver. Take care not to scratch the finish of the plastic/metal screw cap. Phillips Screwdriver 3. Using a Phillips screwdriver, loosen and remove the right lock lever screw.
PAGE 9
User’s Guide Battery Replacement Instructions - continued Hinged French Doors Hinged French Doors 1. Unlock and open the door panel. Secure the door panel in the open position (e.g. chair). 2. Locate the battery tray at the top of the center strike plate in the door jamb. 3. Using a small needle nose pliers, grip the center of the battery tray to remove. Take care to avoid scratching the center strike plate finish. Battery Tray 4.
PAGE 10
User’s Guide Battery Replacement Instructions - continued Sliding Doors Sliding Doors 1. Unlock and open the door panel. 2. Locate the battery tray above the keeper on the door jamb. 3. Using a small needle nose pliers, grip the center of the battery tray to remove from the sensor cover plate. 4. Remove the discharged batteries (see battery disposal information on page 5). 5. Replace the batteries with two fresh CR-1632 lithium coin cell batteries.
PAGE 11
User’s Guide Finishing and General Care - continued Masking Casement and Awning Window Sensors Masking Hinged French Door Strike and Sensor If the lock bezel and lock lever are removed prior to finishing, fill the bezel opening with a protective mask such as painter’s tape, paper towel or foam. Mask the hinged door center strike plate and sensor on the side jamb with painter’s tape prior to finishing.
PAGE 12
User’s Guide Finishing and General Care - continued • When reassembling the hardware, note that casement and awning lock levers are handed and the magnets should always be located to the bottom of the lock lever (see illustration below). In the instance the sash locks were removed on double-hung or single-hung windows, make sure they get installed back to the correct location. The double-hung and single-hung sash lock covers are handed (see illustration below).
PAGE 13
User’s Guide Troubleshooting Frequently Asked Questions Questions Answers 1. How long will the VeriLock™ sensor batteries last? 1. 2. Who do I call for help? 2. For questions regarding your security system itself or monitoring services, contact your security system dealer. 3. What if the VeriLock™ sensors do not work? Most 3.0 Volt lithium batteries will provide years of operation.
PAGE 14
User’s Guide Troubleshooting - continued Frequently Asked Questions Questions Answers 5. What does the message “CHECK” mean? 5. A “CHECK” message will appear on the system keypad when a sensor is identified as inoperative.
PAGE 15
User’s Guide Glossary Awning window: Hinged at the top, this window has a single sash that opens outward from the bottom. Lock bezel: The trim component of casement sash lock hardware. Battery tray: A small plastic enclosure that holds the battery for each sensor. Lock lever: The operating lever component of casement and/or double-hung sash lock hardware. Casement: A window with side hinges that opens outward from either the right or left.
PAGE 16
User’s Guide Regulatory Statements Federal Communications Commission (FCC) Part 15 Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received, including interference that may cause undesired operation.
PAGE 17
User’s Guide Limited Warranty for Eagle® Windows and Doors with Verilock™ Integrated Security Sensors Limited Warranty Eagle warrants VeriLock™ integrated security sensors in its window and door products against defects in manufacturing, workmanship and materials for a period of two (2) years from the date of manufacture.
PAGE 18
User’s Guide Limited Warranty - continued Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation of the duration of an implied warranty, so the above limitations or exclusions may not apply to you.
PAGE 19
User’s Guide Limited Warranty - continued • Eagle® windows and doors have their own limited warranties and are not covered by this limited warranty Returns/Repairs/Reimbursement Subject to the terms and conditions listed above, during the applicable limited warranty period, Eagle will repair, replace or reimburse you, at its sole option, free of charge for any defect in VeriLock™ integrated security sensors or its components.
PAGE 20
User’s Guide Limited Warranty - continued or component is not available for replacement purposes, Eagle reserves the right, at its discretion, to substitute a similar Eagle window or door product or component of equivalent value or to refund the original purchase price of the defective product or component. Non-Warranty Repair/Replacement Customer will be charged for repairs or replacement of out of warranty product.