Wall mountable Bluetooth music system with CD / PLL FM Radio and Clock MODEL: MET812B MODEL: JBS-215 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE
WARNING TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the back enclosure of the apparatus. The Rating plate is located at the back enclosure of the apparatus IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions.
15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Do not overload wall outlet. Use only power source as indicated. 17. Use replacement part as specified by the manufacturer. 18. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 19.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
This unit employs a laser. The use of controls or adjustment or performance of procedures other than those specified here may result in exposure to hazardous radiation. Should any trouble occur, remove the power source and refer servicing to qualified personnel. PROTECT YOUR FURNITURE This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls.
LOCATION OF CONTROLS 1 / SOURCE BUTTON 12 OPEN /CLOSE 2 SLEEP / DIMMER BUTTON 13 SPEAKER 3 MEM / CLK SET / PROG BUTTON 14 CD DOOR 4 M- / PLAY MODE BUTTON 15 LCD DISPLAY 5 / TUN- BUTTON 16 UNIT BASE 6 / M+ BUTTON 17 WALL MOUNT SLOT 7 / PAIR / SCAN BUTTON 18 FM ANTENNA 8 TUN+ BUTTON 19 EARPHONES JACK 20 AUX IN JACK 10 AL1 / VOLUME- BUTTON 21 USB PORT FOR CHARGING 11 AL2 / VOLUME+ BUTTON 22 DC IN JACK 9 EQ BUTTON 5
REMOTE LOCATION CONTROLS Notes: 1. Remove spacer tab before using this unit for first time. 2. Press the buttons of the remote to pointing the main unit remote senor area to fully control the main unit. TO INSTALLING / REPLACING REMOTE BATTERY 1. Pull the battery door at the back of the unit as shown figure. 2. Insert the battery in the battery door with “+" positive facing up. Only CR2025 3V lithium battery should be used. 3. Insert the battery door with new battery back into the unit.
POWER SOURCE The JBS-215 operates using standard 120V~ 60Hz AC household power. AC POWER OPERATION An AC-DC Adaptor with the output of DC 5V, 3A (included) is required for operating the main unit when using AC power mode. To connect the AC-DC Adaptor to the unit and 120V~ 60Hz AC Outlet: 1. Firmly and securely insert the DC plug of the adaptor into the DC Jack on the back of the unit. 2. Plug the AC Adaptor plug into the 120V AC outlet.
Wake to FM Radio Make sure your radio station is set to the one you want to wake up to. The unit will play the last radio station you listened to when the wake time is reached. The VOLUME CONTROL need to set to the desired sound level. The Radio will automatically turn on when the alarm time is reached. The corresponding AL1 or AL2 icon will blink. The alarm will sound for 60 minutes and then turn off automatically. To stop the radio sound immediately, tap the BUTTON or corresponding (AL1 or AL2) BUTTON.
RADIO OPERATION 1. Tap the SOURCE BUTTON to RADIO, FM band frequency will show on the LCD display. /TUN+ dial to tune the radio manually, 2. Tap the TUN/TUN+ dial to search to previous/next available station. Press and hold the TUN3. Tap the VOLUME - / VOLUME + BUTTOM to obtain the desired sound level. Setting the Radio Station Presets The unit allows you to store up to 20 FM stations for easy recall at any time. 1. Tap the SOURCE BUTTOM unit to FM RADIO position. 2.
Notes: 1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled devices for Bluetooth operation since it may vary from model to model. 2. If your Bluetooth enabled device does not support A2DP profile, it will not play the music through the speaker, even if paired (linked). 3. Remember to turn off the JBS-215 when you have finished listening. 4. Don't forget to switch off the power of your external audio device as well.
4. You may repeat steps 2 - 3 to program as many as 20 tracks. BUTTON to start the programmed play. 5. Tap the PLAY/PAUSE 6. You may tap the PLAY MODE BUTTON repeatedly to select REP 1 or REP ALL programmed tracks. 7. Tap STOP BUTTON once to stop playback. BUTTON to resume programmed play. 8. Tap the PLAY/PAUSE 9. To cancel programmed play and, press the STOP BUTTON twice.
USB CHARGING CONNECTING A USB CORD (NOT INCLUDED) FOR CHARGING YOUR CELL PHONE (DC 5V 1 A) 1. Plug the standard end of the USB cable (not included) into the USB CHARGING PORT located on the back of the unit. Plug the other end of the cable into the device you wish to charge. 2. Observe the battery charge indicator on your device to make sure the charging process starts normally. 3. Unplug the cable when your device is fully charged.
TROUBLE SHOOTING GUIDE If you experience difficulties in the use of this CD radio, please check the following or call 1800-777-5331 for Customer Service and support Symptom Possible Cause Noise or sound distorted on FM broadcast Station not tuned properly. Wire antenna is not fully extended. FM radio no sound Unit not in FM mode. Volume at minimum CD player will not play Unit not in CD function mode. CD is installed incorrectly.