User Manual

Table Of Contents

INSTRUCTION MANUAL

Anbull Power Switching Supply

Dear Customer!

Thank you very much for your trust in us and our product.

Please read these operating instructions carefully before start of operation.

1. Safety Rules and General Warnings

 ATTENTION: 110-264 Volts AC voltage, device is not suitable for children – danger of life!

 ATTENTION: The device is exclusively designed as a power supply and must not be used for other purposes.

 Persons, which are not able to use the device in a safe way, because of their physical, sensory or mental competence,

or because of their inexperience, should not use the power supply without control or instruction of a skilled person.

Look that the children don’t play with the device.

 Do not cover the vent outlet during operation!

 If the mains connection of the device is damaged, you have to change it, with an original connection which is available

at the manufacturer.

 Don’t use the device near flammable gases, solvents or vapors. EXPLOSION RISK!

 Use the device only in dry rooms and protect against dust.

 Protect against direct solar radiation.

 Clean with a dry cloth only.

 No fluids of any kind must get into the device.

 In case of obvious damage or malfunction immediately disconnect the device from mains supply and protect against

unintended reconnection.

 Do not open! Repair work must only be accomplished by authorized companies or specialized technical staff.

PAGE 1
INSTRUCTION MANUAL INSTRUCTION MANUAL Anbull Power Switching Supply Dear Customer! Thank you very much for your trust in us and our product. Please read these operating instructions carefully before start of operation. 1. Safety Rules and General Warnings  ATTENTION: 110-264 Volts AC voltage, device is not suitable for children – danger of life!  ATTENTION: The device is exclusively designed as a power supply and must not be used for other purposes.
PAGE 2
INSTRUCTION 2. MANUAL General Information This product is a new type of switching power supply controlled by pulse width modulation (PWM) technology. The input AC voltage is rectified and filtered to produce a DC voltage. Under the control of a dedicated chip, the transformer and switching devices in the circuit generate a high-frequency square wave voltage. After passing through a high-power rectifier tube, it outputs a high-precision and highly stable DC Voltage.
PAGE 3
INSTRUCTION MANUAL  Strictly prohibited to use power supply in high temperature environment, it should has favorable heat transfer space and environment.  Strictly prohibited to install power supply on inflammable (ex: woodwork, flammable plastic etc), should keep away from petrol stations or places where fireworks are prohibited.