IN ST A L LATI O N & H A RDW A RE R EFERE NCE M A N U A L M O DE RO X ® S E R I ES G 5 TO U CH PA N E L S MXT-2001-PAN 20. 3" MODERO X SER IE S G5 PAN ORAMIC TABLETOP TOUCH PAN EL MXD-2001-PAN-L 20.3" MODERO X SERI ES G5 PANORA MI C LANDSCAPE WALL MOUNT TOUCH PANEL MXD-2001-PAN-P 20. 3" MODERO X SE RIE S G5 PA NORAMIC P ORTRAI T WALL MOUNT TOUCH P ANE L MXT-1901-PAN 19. 4" MODER O X SERI ES G5 P ANOR AMI C TA BLETOP TOUCH PA NEL MXD-1901-PAN-L 1 9.
IMPORTANT SAFETY INSTRUCTIONS 1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
ESD WARNING To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before touching any internal materials. When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive smocks, and conductive work mats are specifically designed for this purpose.
EU COMPLIANCE INFORMATION: Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC Directive 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU; European Union WEEE (recast) Directive 2012/19/EU; European Union Radio and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. You may obtain a free copy of the Declaration of Conformity by visiting http://www.amx.com/techcenter/certifications.asp.
Table of Contents Table of Contents Modero X Series G5 Touch Panels ....................................................................7 Overview ........................................................................................................................... 7 Sleep Button ...................................................................................................................... 8 Powering On/Off X Series G5 Panels .....................................................................
Table of Contents MXT-1001 / MXT-701 ..................................................................................................... 32 Connector Locations - MXT-1001/MXT-701........................................................................................ 32 Power via 13.5V ....................................................................................................................................... 32 Wiring a 13.5V Power Connection ....................................................
Modero X Series G5 Touch Panels Modero X Series G5 Touch Panels Overview The most elegant interface designed specifically for dedicated room control has been significantly enhanced to include a new G5 Graphic Engine to provide even faster and smoother animations and transitions, and we quadrupled the processing power with a new Quad Core Processor. This new generation of touch panels is built for usability offering edge-to-edge capacitive touch glass with multi-touch capabilities.
Modero X Series G5 Touch Panels Sleep Button X Series G5 touch panels are operated using its integral touchscreen, as well as the Sleep button. The Sleep button is located in the in the center of the top panel of the device for tabletop and landscape wall-mount panels; it is located in the center of the left panel for portrait panels (see FIG. 2 on page 8). Sleep button (on top panel) Sleep button (on top panel) Sleep button (on left panel) FIG.
Modero X Series G5 Touch Panels NFC Support X Series G5 touch panels support Near Field Communications™ (NFC) Technology. NFC technology facilitates making transactions, exchanging digital content, and connecting electronic devices with a touch. NFC transmissions are short-range (from a touch to a few centimeters), working with existing contact-less card technologies and containing built-in capabilities to support secure applications.
Modero X Series G5 Touch Panels Additional Documentation Refer to the Modero X Series G5 Touch Panels Conf iguration and Programming Manual for details on configuring and programming G5 touch panels, including: Information Detailed on Modero X Series G5 Programming, including Transitioning from G4 to G5 descriptions of each page and page option available in the G5 Settings Menu Firmware upgrades via the G5 Settings Menu (Reset and Update page) Using Content Sharing Using Gestures MXA-M
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT-2001-PAN (Tabletop) NFC Sensor Sleep Button USB Ports (2) Cable Slot FIG. 6 MXT-2001-PAN touch panel MXT-2001-PAN Specif ications MXT-2001-PAN Specif ications DIMENSIONS (HWD) 9 3/16" x 20 3/8" x 5 7/8" (235mm x 519mm x 150mm) WEIGHT 12.3 lbs (5.58 Kg) POWER CONSUMPTION • Full-On: 35 W (13.5V • Standby: 7 W (13.5V EXTERNAL POWER SUPPLY REQUIRED Requires one of these AMX power sources (not included): • PSR4.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXT-2001-PAN Specif ications (Cont.) COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP • USB: (3) USB host 2.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXD-2001-PAN (Wall-Mount - Landscape/Portrait) The MXD-2001-PAN is available in Portrait and Landscape layouts: Portrait MXD-2001-PAN-P FG5968-36 Landscape MXD-2001-PAN-L FG5968-37 NFC Sensor Sleep Button Sleep Button MXD-2001-PAN-L NFC Sensor MXD-2001-PAN-P FIG.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXD-2001-PAN Specif ications (Cont.) TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS) • Display Size (WH) Landscape: 20.4" x 9.5" (519mm x 242mm), 21.3" (541mm) diagonal Portrait: 9.5" x 20.4" (242mm x 519mm), 21.3" (541mm) diagonal • Viewable Area (WH) Landscape 18.7" x 7.8" (475mm x 198mm ), 20.3" (514mm) diagonal Portrait 7.8" x 18.7" (198mm x 475mm), 20.
MXT/D-2001-PAN - 20.3" X Series G5 Panels MXD-2001-PAN Specif ications (Cont.) CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector • USB: (2) USB host 2.0, Type A ports (1) Micro-USB device port (currently not in use) • Power: 2-pin, locking 3.5mm Phoenix connector ENVIRONMENTAL • • • • • • • Temperature (Operating): 32°F to 104°F (0°C to 40°C) Temperature (Storage): 4°F to 140°F (-20°C to 60°C) Humidity (Operating): 20% to 85% RH Humidity (Storage): 5% to 85% RH Power ("Heat") Dissipation: On: 119.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT-1901-PAN (Tabletop) NFC Sensor Sleep Button USB Ports (2) Cable Slot FIG. 8 MXT-1901-PAN touch panel MXT-1901-PAN Specif ications MXT-1901-PAN Specif ications DIMENSIONS (HWD) 7" x 20 3/8" x 5 5/16" (177mm x 519mm x 135mm) WEIGHT 9.5 lbs (4.31 Kg) POWER CONSUMPTION • Full-On: 35W (13.5V • Standby: 7W (13.5V EXTERNAL POWER SUPPLY REQUIRED Requires one of these AMX power sources (not included): • PSR4.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXT-1901-PAN Specif ications (Cont.) COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP • USB: USB: (3) USB host 2.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXD-1901-PAN (Wall-Mount - Landscape/Portrait) The MXD-1901-PAN is available in Portrait and Landscape layouts: Portrait MXD-1901-PAN-P FG5968-42 Landscape MXD-1901-PAN-L FG5968-43 NFC Sensor Sleep Button Sleep Button MXD-1901-PAN-L NFC Sensor MXD-1901-PAN-P FIG.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXD-1901-PAN Specif ications (Cont.) TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS) • Display Size (WH) Landscape: 20.4" x 6.9" (519mm x 175mm), 20.4" (518mm) diagonal Portrait: 6.9" x 20.4" (175mm x 519mm), 20.4" (518mm) diagonal • Viewable Area (WH) Landscape: 18.7" x 5.9" (475mm x 151mm), 19.4" (493mm) diagonal Portrait: 5.9" x 18.7" (151mm x 475mm), 19.
MXT/D-1901-PAN - 19.4" X Series G5 Panels MXD-1901-PAN Specif ications (Cont.) CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector • USB: (2) USB host 2.0, Type A ports (1) Micro-USB device port (currently not in use) • Power: 2-pin, locking 3.5mm Phoenix connector ENVIRONMENTAL • • • • • Temperature (Operating): 32°F to 104°F (0°C to 40°C) Temperature (Storage): 4°F to 140°F (-20°C to 60°C) Humidity (Operating): 20% to 85% RH Humidity (Storage): 5% to 85% RH Power ("Heat") Dissipation: On: 119.
MXT/D-1001 - 10.1" X Series G5 Panels MXT/D-1001 - 10.1" X Series G5 Panels MXT-1001 (Tabletop) NFC Sensor Sleep Button USB Ports (2) FIG. 10 MXT-1001 Touch Panel MXT-1001 Specif ications MXT-1001 Specif ications DIMENSIONS (HWD) 6 7/8" x 9 7/8" x 4 7/8" (174mm x 252mm x 124mm) WEIGHT 3.1 lbs (1.41 Kg) POWER CONSUMPTION • • • • Full-On: 12.95W maximum Standby: 5.
MXT/D-1001 - 10.1" X Series G5 Panels MXT-1001 Specif ications (Cont.) COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP • USB: (2) USB host 2.
MXT/D-1001 - 10.1" X Series G5 Panels Touch Panel Aspect Ratio While the touch panel screen physical dimensions fall between 16:9 and 16:10, any incoming video stream can be scaled to 16:9 if needed. This may lead to some letter boxing around the video in some cases.
MXT/D-1001 - 10.1" X Series G5 Panels MXD-1001 Specif ications (Cont.) TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with In-plane Switching Technology (IPS) • Display Size (WH) Landscape: 9.9" x 6.7" (252mm x 170mm), 12.0" (304mm) diagonal Portrait: 6.7" x 9.9" (170mm x 252mm), 12.0" (304mm) diagonal • Viewable Area (WH) Landscape: 8.5" x 5.3" (217mm x 136mm), 10.1" (257mm) diagonal Portrait: 5.3" x 8.5" (136mm x 217mm), 10.
MXT/D-1001 - 10.1" X Series G5 Panels MXD-1001 Specif ications (Cont.) CONNECTIONS • Ethernet: 10/100 port, RJ-45 connector through cable extension • USB: (2) USB host 2.0, Type A ports (1) Micro-USB device port (currently not in use) • Power: PoE (Power over Ethernet), 802.
MXT/D-701 - 7" X Series G5 Panels MXT/D-701 - 7" X Series G5 Panels MXT-701 (Tabletop) NFC Sensor Sleep Button USB Ports (2) FIG. 12 MXT-701 touch panel MXT-701 Specif ications MXT-701 Specif ications DIMENSIONS (HWD) 5" x 7 5/16" x 4 1/8" (126mm x 187mm x 105mm) WEIGHT 1.9 lbs (0.86 Kg) POWER CONSUMPTION • • • • Full-On: 11.5W maximum Standby: 5.
MXT/D-701 - 7" X Series G5 Panels MXT-701 Specif ications (Cont.) COMMUNICATIONS • Ethernet: 10/100 Auto MDI-X port, RJ-45 connector. Supported IP and IP-Based Protocols: UCP, TCP, ICMP, ICSP, IGMP, DHCP, SSH, FTP, DNS, RFB (for VNC), HTTP • USB: (2) USB host 2.
MXT/D-701 - 7" X Series G5 Panels MXD-701 (Wall-Mount - Landscape/Portrait) The MXD-701 is available in Portrait and Landscape layouts: . Portrait MXD-701-P FG5968-54 Landscape MXD-701-L FG5968-55 NFC Sensor Sleep Button Sleep Button NFC Sensor Portrait Landscape FIG.
MXT/D-701 - 7" X Series G5 Panels MXD-701 Specif ications (Cont.) TOUCH SCREEN DISPLAY • Display Type: TFT Active Matrix Color LCD with Fringe Field Switching (FFS) - Wide Viewing Angle Technology • Display Size (WH): Landscape: 7.3" x 4.8" (186mm x 122mm), 8.8" (222mm) diagonal Portrait: 4.8" x 7.3" (122mm x 186mm), 8.8" (222mm) diagonal • Viewable Area (WH): Landscape: 6.05" x 3.54" (154mm x 90mm), 7.0" (178mm) diagonal Portrait: 3.54" x 6.05" (90mm x 154mm), 7.
MXT/D-701 - 7" X Series G5 Panels MXD-701 Specif ications (Cont.) ENVIRONMENTAL • • • • • Temperature (Operating): 32°F to 104°F (0°C to 40°C) Temperature (Storage): 4°F to 140°F (-20°C to 60°C) Humidity (Operating): 20% to 85% RH Humidity (Storage): 5% to 85% RH Power ("Heat") Dissipation: On: 39.2 BTU/hr Standby: 19.
Installing Tabletop (MXT) Panels Installing Tabletop (MXT) Panels MXT-2001-PAN / MXT-1901-PAN Detailed specifications drawings for the MXT-2001-PAN and MXT-1901-PAN are available to download from www.amx.com. Connector Locations - MXT-2001-PAN / MXT-1901-PAN Two Type A USB ports are located on the rear right corner of the panel (FIG. 14). USB peripherals (i.e. mouse, keyboard) may be connected to either of the two USB ports on the rear of the device.
Installing Tabletop (MXT) Panels MXT-1001 / MXT-701 Detailed specifications drawings for the MXT-1001 and MXT-701 are available to download from www.amx.com. Connector Locations - MXT-1001/MXT-701 Two Type A USB ports are located on the rear right corner of the panel (FIG. 17). USB peripherals (i.e. mouse, keyboard) may be connected to either of the two USB ports on the rear of the device.
Installing Tabletop (MXT) Panels Ethernet Cable Installation and Modif ication In tabletop installations where concealing the Ethernet cable is desired, a hole at least 1.00” (2.54 cm) in diameter is required in the surface to allow passage of the female RJ45 connector (FIG. 19). If using a smaller hole is unavoidable, you will need to disconnect the Ethernet cable (ECA5968-05) from the device, to feed the male end of the cable through. Ethernet Cable Clamp Connector FIG.
Installing Wall-Mount (MXD) Panels Installing Wall-Mount (MXD) Panels A Note About Wall and Rack Installation Some products are installed in areas of differing temperature and cooling methodologies. These include products installed in walls, racks, cabinets, etc. Those areas may have different temperatures and/or cooling approaches that must be taken into consideration to maintain the product within the specified operating temperature. AMX DEVICE FIG.
Installing Wall-Mount (MXD) Panels Installation Recommendations During any installation, a lack of ventilation may produce conditions that may adversely affect the device’s operation. In these circumstances, special care must be made to make sure that temperatures within enclosed areas do not exceed the device’s maximum rated temperature.
Installing Wall-Mount (MXD) Panels MXD-2001-PAN Dimensions FIG. 24 provides dimensions for the MXD-2001-PAN: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG.
Installing Wall-Mount (MXD) Panels MXD-1901-PAN Dimensions FIG. 25 provides dimensions for the MXD-1901-PAN: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 25 MXD-1901-PAN - Dimensions NOTE: In order to ensure a stable installation, the thickness of the wall material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches (2.22cm).
Installing Wall-Mount (MXD) Panels Installing the Backbox MXD-2001-PAN Installation Dimensions FIG. 26 and FIG. 27 provide installation dimensions for the MXD-2001-PAN: FIG. 26 MXD-2001-PAN-L Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation.
Installing Wall-Mount (MXD) Panels MXD-1901-PAN Installation Dimensions FIG. 28 and FIG. 29 provide installation dimensions for the MXD-1901-PAN: FIG. 28 MXD-1901-PAN-L Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation.
Installing Wall-Mount (MXD) Panels Cables Routed to Wall Opening Wall 4X Installation Clamp for Wall Thickness .37 [12.01] to .98 [25.0] 8X Knock Outs Remove For Cable Routing As Needed Mounting screws placement (optional) Note: Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 30 MXD-1901-PAN Backbox installation (Landscape) 4.
Installing Wall-Mount (MXD) Panels NOTE: Refer to the Power via 13.5V section on page 41 for details on wiring a power connection. 8. Test the incoming wiring by attaching the panel connections to their terminal locations and applying power. Verify that the panel is receiving power and functioning properly to prevent repetition of the installation. NOTE: Do not disconnect the connectors from the touch panel. The unit must be installed with the attached connectors before being inserted into the drywall.
Installing Wall-Mount (MXD) Panels Wiring a 13.5V Power Connection To use the 2-pin 3.5mm captive wire connector with a 13.5V -compliant power supply, the incoming PWR and GND wires from the external source must be connected to their corresponding locations on the connector (FIG. 33). The connector uses locking screws to insure a connection to the device, so make sure to insert and tighten the screws before applying power. PWR + Power Supply GND To the Touch Panel FIG.
Installing Wall-Mount (MXD) Panels MXD-1001 / MXD-701 Installation Note that the figures in this section show landscape (-L) panels, but the concepts presented here apply equally to portrait (-P) panels, since the hardware is the same for landscape and portrait panels except for the horizontal / vertical orientation. Detailed specifications drawings for the MXD-1001 and MXD-701 are available to download from www.amx.com.
Installing Wall-Mount (MXD) Panels MXD-1001 Dimensions FIG. 37 provides dimensions for the MXD-1001: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG.
Installing Wall-Mount (MXD) Panels MXD-701 Dimensions FIG. 37 provides dimensions for the MXD-701: Notes: Dimensions in parenthesis are in millimeters Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 38 MXD-701 - Dimensions NOTE: In order to ensure a stable installation, the thickness of the wall material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches (2.22cm). The mounting surface should also be smooth and flat.
Installing Wall-Mount (MXD) Panels Installing the Backbox MXD-1001 Installation Dimensions FIG. 39 and FIG. 40 provide installation dimensions for the MXD-1001: FIG. 39 MXD-1001 Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation.
Installing Wall-Mount (MXD) Panels MXD-701 Installation Dimensions FIG. 41 and FIG. 42 provide installation dimensions for the MXD-701: FIG. 41 MXD-701-L Installation Dimensions (front view) Notes: - Dimensions in parenthesis are in millimeters. - These drawings show a Landscape panel. The dimensions are the same for Portrait panels, except for the vertical orientation. Additional detailed installation and product drawings (for both Landscape and Portrait panels) are available to view/download at www.
Installing Wall-Mount (MXD) Panels 3. Thread the incoming Ethernet and USB cables through the surface opening (FIG. 43 and FIG. 44). Note that these figures show a landscape panel but the installation of a portrait panel is essentially the same, other than the vertical orientation. Leave enough slack in the wiring to accommodate any re-positioning of the panel. FIG. 43 shows the MXD-1001 Backbox installation: 4X Installation Clamp for Wall Thickness .31 [12.0] to .98 [.25.
Installing Wall-Mount (MXD) Panels FIG. 44 shows the MXD-701 Backbox installation: 2X Installation Clamp for Wall Thickness .37 [12.03] to .98 [.25.0] 4X Knock-Outs Remove for Cable Routing as Needed #4 Screws Note: Additional detailed installation and product drawings are available to view/download at www.amx.com FIG. 44 MXD-701 Backbox Installation (Landscape) 4.
Installing Wall-Mount (MXD) Panels Latch Hooks Mounting Surface Backbox Snaps FIG. 45 Installing the MXD-1001 / MXD-701 NOTE: If a gap is observed between the panel and the Backbox, or feel any binding while locking down the panel, stop immediately and verify that no cables or other items are in the way. Do not force the panel into position, as this can cause damage to the touch screen or the panel electronics. 10. Reconnect the terminal Ethernet and USB cables to their respective ports.
Installing Wall-Mount (MXD) Panels 6. Using a non-conductive item such as a wooden stick, reinsert the Ethernet cable connector into the device. Ensure that the connector is properly seated. 7. Tighten the clamp to secure the Ethernet cable. 8. Connect the RJ45 connector to its incoming Ethernet cable and apply power. Make sure the clamp is around the bundled black cable, not the individual wires. Uninstalling the MXD-1001 The MXD-1001 is held in place via latch hooks and clips in the Backbox.
Installing Wall-Mount (MXD) Panels Uninstalling the MXD-701 The MXD-701 is held in place to the Backbox via latch hooks and clips on the Backbox. In certain circumstances, such as firmware updates or other maintenance that requires accessing the device’s USB port, the device may need to be removed from the Backbox. The clips that lock down the MXD-701’s bottom edge (Landscape) or right edge (Portrait) may be unlatched in order to remove the device from the mounting surface.
Appendix: Troubleshooting Appendix: Troubleshooting Overview This section describes the solutions to possible hardware/firmware issues that could arise during the common operation of a Modero X Series G5 touch panel. Panel Doesn’t Respond To Touches Symptom: The device either does not respond to touches on the touch screen or does not register the touch as being in the correct area of the screen. If the screen is off: The device may be in Display Sleep Mode.
© 2015 Harman. All rights reserved. Modero X and Modero X Series, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies. AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.