Specifications

Quick Start Guide
AutoPatch CatPro RGBHV+Stereo Modules
Overview
CatPro RGBHV+Stereo Transmitter (TX) and Receiver (RX) Modules work together
or work in conjunction with CatPro RGBHV+Stereo boards on an AMX AutoPatch
Distribution Matrix. This guide contains complete information for standalone use.
For use with a distribution matrix, see the distribution matrix’s instruction manual on
the AMX AutoPatch CD or at www.amx.com.
Specifications
* The automatically adjusting universal 110/220 IEC power supply is ENERGY STAR
®
qualified to
ensure maximum efficiency and savings.
Module Installation
Module Mounting Options
Rack Trays and Mounting Brackets – Search for ”V Style” at www.amx.com.
Important: Always use a UL approved power source. Check the power source’s
documentation for information specific to that power source.
System Setup
A typical setup using CatPro RGBHV+Stereo TX and RX Modules is illustrated in
FIG. 2. The signals are sent to a monitor with speakers at a distance, as well as to a
local monitor with speakers.
FIG. 1
CatPro RGBHV+Stereo TX and RX Modules
General Specifications – TX (FG1010-45-01) and RX (FG1010-48-01)
Power Consumption (max.) 12 V to 24 V DC @ 6 W
Thermal Dissipation (max.)
20 BTU/hr.
Power Connector
2.1 mm DC power jack (power supply provided*)
Humidity
0 to 90% non-condensing
Operational Temperature
32° to 110° F (0° to 43° C)
Dimensions TX Module 5.15 in. (13.08 cm) depth
5.80 in. (14.73 cm) width
1.66 in. (4.22 cm) height
Weight TX Module Approximately 1.5 lb. (0.68 kg)
Dimensions RX Module 5.15 in. (13.08 cm) depth
4.33 in. (11.00 cm) width
1.66 in. (4.22 cm) height
Weight RX Module Approximately 1.3 lb. (0.6 kg)
Supported Twisted-Pair
Cable Types
Category cable 5, 5e, 6, 6e, and STP (skew free cable is not
recommended)
Note: All measurements listed were taken using Cat5e cable.
Approvals CE, UL, cUL, RoHS
Specifications – TX (FG1010-45-01)
Signal Types RGBHV + Stereo Audio
Maximum Resolution 1600x1200 (4:3) and 1920x1080p (16:9) @ 60 Hz
up to 1000 ft. (305 m)
RGB In
Signal Level Range:
Impedance:
Return Loss:
+0.75 V to -0.3 V (terminated)
75 ohms
<-35 dB @ 5 MHz
RGB Local Out
Signal Level Range:
Impedance:
SNR:
+0.75 V to -0.3 V
(terminated)
75 ohms
>65 dB
Sync In
Impedance:
Polarity:
510 ohms
Active high or low
Sync Local Out
Signal Level:
Polarity:
Low = 0 V, High = +5 V (unterminated)
Active high or low (follows input polarity)
Audio In
Signal Type:
Signal Levels (max.):
Impedance:
Stereo, unbalanced
+8 dBu
2 kohms
Audio Local Out
Signal Type:
Signal Levels (max.):
Frequency Response:
THD+N:
SNR:
Impedance:
Stereo, unbalanced
+8 dBu (unity gain)
<±0.35 dB, 20 Hz to 20 kHz
<0.04%, 1 kHz, -10 dBu to +4 dBu
>105 dB, 20 Hz to 20 kHz, Vin = +4 dBu
<5 ohms
Connectors
RGBHV In:
RGBHV Local Out:
Stereo Audio In:
Stereo Audio Local Out:
RGBHV+Stereo Out:
1 Female HD-15
1 Female HD-15
1 Female 3.5 mm mini-stereo jack
1 Female 3.5 mm mini-stereo jack
1 Female RJ-45
CatPro RGBHV+Stereo TX Module
FG1010-45-01
CatPro RGBHV+Stereo RX Module
FG1010-48-01
Front view
Rear view
EDID Specifications – TX (FG1010-45-01)
Standard Timing Identification
ID 1 1600x1200 @ 60 Hz
(This is the preferred timing identified in the EDID)
ID 4 1280x1024 @ 85 Hz
ID 6 1152x864 @ 120 Hz
ID 8 1280x800 @ 60 Hz
ID 7 1280x720 @ 60 Hz
ID 3 1024x768 @ 120 Hz
ID 5 800x600 @ 120 Hz
ID 2 640x480 @ 120 Hz
Established Timing
720x400 @ 70 Hz, 88 Hz
640x480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz
800x600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz
832x624 @ 75 Hz
1024x768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz
1280x1024 @ 75 Hz
1152x870 @ 75 Hz
Specifications – RX (FG1010-48-01)
Signal Types RGBHV + Stereo Audio
Maximum Resolution 1600x1200 (4:3) and 1920x1080p (16:9) @ 60 Hz
up to 1000 ft. (305 m)
RGB Out (at 1000 ft.)
Signal Level Range:
Impedance:
SNR:
Skew Adjustment:
+0.75 V to -0.3 V typical (terminated, user adjustable with gain & peak)
75 ohms
>50 dB
0 to 62 ns in 2 ns increments on RGB channels
(user adjustable)
Sync Out
Signal Levels:
Polarity:
Low = 0 V, High = +5 V (unterminated)
Active high or low (follows input polarity)
Audio Out (at 1000 ft.)
Signal Type:
Signal Levels (max.):
Volume Control Range:
Frequency Response:
THD+N:
SNR:
Impedance:
Stereo, unbalanced
+8 dBu
Mute to +6 dB (user adjustable)
<±0.2 dB, 20 Hz to 20 kHz
<0.04%, 1 kHz, -10 dBu to +4 dBu
>105 dB, 20 Hz to 20 kHz, Vin = +4 dBu
<5 ohms
Connectors
RGBHV+Stereo In:
RGBHV Out:
Stereo Audio Out:
1 Female RJ-45
1 Female HD-15
1 Pluggable 3.5 mm terminal block
FIG. 2 Typical system setup using CatPro Modules
TX# FG1010-45-01
RX# FG1010-48-01
Source PC
Local monitor
with speakers
Distance monitor
with speakers
Note: When used with an AMX
AutoPatch Distribution Matrix,
overall cable length cannot exceed
1,000 ft. (305 m).