PRODUCT SPECIFICATION BT V4.0 LE Dual Mode Bluetooth Stereo Audio Module WB118C User Manual Change History Revision Version 1.0 Date 2014/05/30 Author Ben J. Chen Change List Preliminary * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
PRODUCT FEATURES Bluetooth V4.0 specification compliant Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.
PRODUCT SPECIFICATIONS MAIN CHIPSET CSR 8645 FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V4.0 LE Bus Interface SPI Data Rate 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power 0 ≤ Output Power ≤ +4 ; Class 2 Device Receiver Sensitivity < 0.1% BER at -82dBm Operating Voltage 3.
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Baseband and Software ■ Internal ROM ■ Memory protection unit supporting accelerated VM ■ 56KB internal RAM, enables full-speed data transfer, mixed voice/data and full piconet support ■ Logic for forward error correction, header error control, access code correlation, CRC, demodulation, encryption bit stream generation, whitening and transmit pulse shaping ■ Transcoders for A-law, μ-law and linear voice from host and A-law, μ-law and CVSD voice over air CSR8600 ROM Series Configuration Tool Configures t
Proximity Pairing Proximity pairing is headset-initiated pairing and it simplifies the out-of-box pairing process. Proximity pairing enables the headset to find the closest discoverable phone. The headset then initiates the pairing activity and the user simply has to accept the incoming pairing invitation on the phone. This means that the phone-user does not have to hunt through phone menus to pair with the new headset. Depending on the phone UI: ■ For a Bluetooth v2.