User's Manual

ManualsBrandsAmtran Technology ManualsElectronics802.11n, 2.4G 1T1R WIRELESS LAN USB MODULE

AmTRAN

WN4608R Specification Page 1/12 2011/12/12

PRODUCT SPECIFICATION

802.11n, 2.4G 1T1R Wireless LAN USB Module

WN4608R

Version 1.4

Author: Tracy Chang

Editor: Tracy Chang

Project Leader: Alfred But

Approved by: Alfred But

Change History

Revision Date Author Change List

Version 1.0 2011/9/23 Tracy Chang Preliminary

Version 1.1 2011/10/7 Tracy Chang Update Transmit Output Power

Version 1.2 2011/10/17 Tracy Chang

Update Mechanical, Domain code,

Frequency range, Transmit Output Power,

Product picture, Power Consumption

Version 1.3 2011/10/21 Tracy Chang Update Transmit Mechanical

Version 1.4 2011/11/29 Tracy Chang Update FCC Warning Statement

* This document contains confidential proprietary information and is property of LTC. The contents of

this document should not be disclosed to unauthorized persons without the written consent of LTC

Summary of content (12 pages)

PAGE 1
AmTRAN PRODUCT SPECIFICATION 802.11n, 2.4G 1T1R Wireless LAN USB Module WN4608R Version 1.4 Author: Tracy Chang Editor: Tracy Chang Project Leader: Alfred But Approved by: Alfred But Change History Revision Version 1.0 Version 1.1 Date 2011/9/23 2011/10/7 Author Tracy Chang Tracy Chang Version 1.2 2011/10/17 Tracy Chang Version 1.3 Version 1.
PAGE 2
AmTRAN CONTENT PRODUCT FEATURES ....................................................................................................................3 PRODUCT SPECIFICATIONS........................................................................................................4 MAIN CHIPSET .......................................................................................................................................4 FUNCTIONAL SPECIFICATIONS .........................................................
PAGE 3
AmTRAN PRODUCT FEATURES Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g and 802.11n The WN4608R is developed using single-chip designed by Ralink Technology Corporation USB 2.
PAGE 4
AmTRAN PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Ralink RT5370 (Cu wire bounding) FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface Universal Serial Bus (USB2.0) Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 7 for HT20MHz MCS 0 to 7 for HT40MHz Media Access Control CSMA/CA with ACK Modulation Techniques Network Architecture Operation Channel Frequency Range 802.
PAGE 5
AmTRAN -73 dBm@MCS7 40MHz -69 dBm@MCS7 WPA, WPA2, WPS, WEP 64/128, IEEE 802.11x, IEEE 802.11i Security Operating Voltage 3.3V ±10% I/O supply voltage OS Supported Microsoft Windows XP/Vista/Win7 Power Consumption TX Mode: 243 mA RX Mode: 176 mA Standby Mode: 51 mA Antenna Type Two Antenna Connectors PIN ASSIGNMENT PIN. 1 2 3 4 5 6 7 8 9 10 PIN DEFINE WOW BT_PRIORITY BT_ACTING WL_ACTING GND D+ D3.
PAGE 6
AmTRAN MECHANICAL Module Tolerance: ±0.
PAGE 7
AmTRAN Shielding case PRODUCT PICTURE TOP WN4608R Specification BOTTOM Page 7/12 2011/12/12
PAGE 8
AmTRAN CONNECTOR WN4608R Specification Page 8/12 2011/12/12
PAGE 9
AmTRAN BLOCK DIAGRAM EEPROM INFORMATION US: Channel 1~11 Active Scan Reg Domain Offset 0x38 for 5G: 0x00 Offset 0x39 for 2.
PAGE 10
AmTRAN RELIABILITY REQUEST WN4608R Specification Page 10/12 2011/12/12
PAGE 11
AmTRAN FCC WARNING STATEMENT Class B: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 12
AmTRAN RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.