Table of Content Chapter1 Before You Start------------------------------P.3 1. 2. 3. Important things to mind-------------------------------------------------P.3 Applied product-------------------------------------------------------------P.3 Product Feature-------------------------------------------------P.3 Chapter2 Introduction------------------------------P.4~P.6 1. 2. 3. 4. Specification------------------------------------------------------P.
Chapter1 Before you Start This manual will help you get the most from your device. If you are a less experience user, you should read through the manual carefully before using your device. The keyboard is connected by Bluetooth, please mind the device which is connected has Bluetooth function. Attention: Do not put the device in a humid, high temperature or low temperature environment. Recommend do not put on the high position. The device with Bluetooth receiver, do not shock too heavier.
human body. It will not cause any harmful interference if client use this device within distance 20cm between the radiator and body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Applied products: iPAD iPhone (os 4) PS3 Mobile phone and Notebook with Bluetooth function 3C products with Bluetooth function which support HID Product feature: Qwerty Format keyboard For the device without keyboard. Bluetooth connection. Backlight design.
Charge connection Keyboard Touchpad 2.
LED light Fn Led Under Fn Led lighting, Keyboard changes to Fn mode.(Control by Function key.) Power Led Power led lighting means device turning on. Other device can detect keyboard device.(control by back power switch.) Touchpad Led Touchpad led lighting mean touchpad is working. (It’s controlled by back touchpad switch.) Bluetooth Led Bluetooth led light is lighting when press “Pair” button. Caps switch key Change word case.
Touchpad 1 :Crtl key The function is the same as normal keyboard “Crtl”. 2:Shift key The function is the same as normal keyboard “Shift”, and also control keyboard mode. 3:Alt key The function is the same as normal keyboard “Alt”, and also the switch to control back light. 4:Pair key(Press and hold 3+ seconds) It’s used to connect with device. Press the button, and the Bluetooth led will glitter and reconnect. When connection succeeds, the led will turn off. Chapter 3.Getting start 3.
Find the device, and click “next”. If it connects successfully, Bluetooth device panel will show “Bluetooth portable keyboard 3.2 Disrupt Bluetooth connection Open applied device Bluetooth control page. choose ”Bluetooth Portable Keyboard” click “remove” choose Click ”Bluetooth Portable Keyboard”, then click “remove” 3.3 Keyboard doesn’t work. Check power led lighting or not.
When power led doesn’t light, it means low battery. Please charge battery. If the power led lights, please reconnect Bluetooth. Press “Pair” button, follow “3.1 Bluetooth connection” to reconnect. 3.4 Charge battery When turn on power, but “power led” doesn’t light. It means low battery. Please plug USB cable into charge connector. After 1.5 hours, the battery will be full. When the device is charging, the device still can work.
4.3 Function mode Fn led is lighting(control by “Fn” key) 4.
Chapter5. Troubleshooting 5.1 Bluetooth problem Q: Applied device can’t detect ”Bluetooth Portable Keyboard”(keyboard name)? A: Please check power switch, switch on and press “Pair” key to connect. Q: If Bluetooth connection is disrupted, how to reconnect? A: Please switch power off, then on. And reconnect Bluetooth, or press “Pair” key.
the applied device is ok or not.。 Q: I have tried the above ways, it still can’t connect. A: It could be the keyboard has some problems, please contact with us. 5.2 Device problem Q: My touchpad can’t work. A: Please check touchpad switch, switch on and the touchpad led will light. Q: There are different characters input in the same key, how to recognize? A: Please check “Chapter4 keyboard” carefully. Q: When the device is charged, can I use the device? A: Yes, the charging will not affect the device.