Manual 1
Table of Contents Troubleshooting ................................................................................................... 5 Let your itablet acclimatise itself .................................................................... 5 Where to use your itablet ................................................................................ 5 Introduction .......................................................................................................... 6 Introducing your itablet .............
Safety Notices ² ² ² ² ² ² ² ² Please read these safety instructions carefully. All precautions and warnings on the equipment should be carefully noted. Please disconnect the computer from the AC outlet before cleaning. Never pour any liquids into any openings or directly onto the computer unit. This could result in fire or electrical shock. Ensure the voltage range of the power outlet is between 100V and 240V before connecting the computer unit.
Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications.
End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR Value: 0.
BEEFFO E YO RE T OR RT U ST AR OU TA This manual will help you get the most from your itablet. If you are a less experienced user, please read through the manual carefully before starting. First Steps Let your itablet acclimatise itself Do not power up your system immediately if it has been exposed to hot or cold conditions. Instead, allow the system to adjust gradually to room temperature over a three to four hour period.
INNTTRRO N ON TIIO CT UC DU OD Introducing Your itablet Your itablet features the latest advances in portable computing technology with a modular design that provides maximum expandability without compromising portability. Never try to disassemble or reverse engineer the computer as we will not be responsible for any damage caused if you do so and your warranty will voided Unpacking your itablet Your itablet comes securely packaged in a shipping carton.
Getting to Know Your Computer Front View 1.CMOS Camera 2MP This is the built-in camera which can be used for video conferencing applications or just taking pictures. 2. Power LED Indicator This lights up when the device is powered on.
Right View 1. 3in1 Card reader SD, MS, MMS card reader (please note that convertors may be required) 2.External HDMI Port The HDMI port is for connecting an external TV, monitor or projector Left View 1.DC IN Connector Plug the AC adapter into this connector. 2.Stereo Headphone The stereo headphone jack (3.
3.USB Ports The Universal Serial Bus (USB2.0-compliant) ports allow you to connect a wide variety of devices to your itablet at rates of up to 480 Mbps. These ports conform to the latest USB2.0 plug-and-play standards Back View 1.Power button Press to turn on your itablet 2.Sound volume button Press to control sound volume. 3.Home page button Press to return previous page.
GEETTTTIINNG G ST D ED TE RT AR TA Setting Up Your itablet ¾ ¾ ¾ Remove your itablet from its package. Connect your itablet to an external power source and charge the battery. Press the power on button. Connecting Your itablet To An External Power Source ¾ ¾ Plug the AC adapter cable into the AC power connector on the computer. Plug one end of the power cord into an electrical outlet and the other end into the AC adapter. To prevent damage to your itablet, please do not use inferior extension cables.
Setting Up [Power on] On connecting the power adapter for the first time, the calibration application will run. When your itablet has fully booted up the welcome page will be displayed.
[Setting Wifi] Unlock To set up wireless and networks select “Settings＂ 13
Select “Wireless & networks＂ Select “Wi-Fi settings＂ 14
Select “Wi-Fi＂to turn on Wi-Fi. Your itablet will scan all available access points before connecting to an available access point. On connecting, the following display will be seen.
Select “Bluetooth” and your itablet will scan all available devices before making a connection. On connection, the following display will be seen.
[Setting Sound & Display] Select “Settings” Select “Sound & display” 18
In Display settings, you can adjust the brightness of the screen or adjust the delay before the screen automatically turns off 19
[Setting Date & Time] Select “Settings” Select “Date & time” 20
Disable the “Automatic” setting to manually set date, time zone and time 21
[Media player] Select “Gallery” In the picture below, the arrow depicts video files whilst the others are all still image files 22
To play a video file, select Movies/Camera or Movies/Gallery When viewing pictures, you can use the arrows to view next / previous image or plus / minus to zoom-in or zoom-out [Music player] 23
Select “Music” Select “Songs” to show all audio files Select an audio file to play 24
As the below picture.
：Shuffle mode ：Repeat mode ：Previous / Back ：Play / Pause ：Next / Forward 26
Software Introduction ： Alarm Clock ： Calendar ： Browser 27
： Calculator ： Calibration ： Camcorder ： Camera ：Android Development Tools ：E-mail ：ES File Explorer ：Weather Forecast info 28
：Gallery(Media Player) ：Media Player ：Music Player ：Settings ：Sound Recorder ：Android Spare Parts ：Threegnetwork (3G) 29
TRRO G NG TIIN OT OO HO SH ES LE BL UB OU This chapter describes how to locate and solve problems that you may experience when using your itablet. General Hardware Problems / Possible Causes and Solutions A freeze on the system during program operation ¾ In the event of an error with the Android OS, reboot your itablet. Turn off using the power switch, wait 3 seconds then turn it back on again.
The wireless LAN connection disconnects after 2~3 minutes and does not reconnect. This may be caused by channel interference or poor signal strength. Try changing the access point channel and reconnect or move the tablet nearer your wireless access point. The computer is unable to connect to the Internet. • Check that your account with your Internet service provider (ISP) is properly configured. Ask your ISP for further assistance. • Check that your wireless is enabled.
Contacting Your Dealer If you still have a problem after reading the preceding section, your next step is to contact your dealer who will be able to determine if the itablet needs to be returned to the shop. Before you call your dealer, please have the following information available: 32 ¾ How is your itablet configured? ¾ What peripheral devices you are using.
SPPEECCIIFFIICCAATTIIO S NS ON Photo Platform CPU Cooling Method Memory Freescale IMX51 ARM Cortex A8 CPU 800MHz Heat Sink 512MB DDR2 SDRAM Memory Mass Storage Maximum 2G DDR2 SDRAM Storage 1GB NAND Flash Card Reader Micro-SD Card up to 16GB. CF card slot NA Display Controller LCD Display Video External Display Camera LCD single touch panel controller 10.
802.11 b/g/n WiFi Bluetooth Communication 3G (option) Other I/O Devices GPS(option) Keyboard Sensors NA Ambient light sensor DC-in Jack I/O Ports External connectors 3.5mm stereo headphone socket USB 2.0 Ports x 2 AC/DC Adapter Power System AC 110~220Volt, (5V DC ) output Color : Black Battery Pack 6400m AH Power Management yes Dimension Weight OS 34 283.5x163x14 1.
