)i*i+al!.
FOR YOUR SAFETY Information contained in this manual is subject to change without notice. No part of this publication may be copied, reproduced, or translated to another language for any purpose. FOR YOUR SAFETY Be sure to read the user manual before starting the operation of the receiver. Do not open the housing. The receiver contains high-voltage components and parts. Even after switching off the receiver still contains high-voltage for a while. Do not expose to rain or moisture.
CONTENTS For Your Safety 1. Before Getting Started 1.1 Main Features 1 1 1.2 Accessories 2 2. Controls and Functions 2.1 Front Panel 3 3 2.2 Rear Panel 4 2.3 Remote Control Unit 5 3. Connections 3.1 Connecting to the TV, VCR and Satellite Antenna 7 7 3.2 Connecting DiSEqC switch 7 3.3 Connecting to the TV, HiFi system and SPDIF 8 4. Settings and Operations 4.1 Basic Settings 9 9 4.2 Viewing TV(or Radio) 14 4.3 Other functions 18 4.4 System Settings 4.5 Game 21 24 5. Appendix 5.
BEFORE GETTING STARTED 1.1 Main Features Easy Menu Function TV Guide Function RF Output Function Electronic Program Guide(EPG) for On Screen Channel Information Software Upgrading Function Through RS-232C Cable by PC Perfect DiSEqC 1.
Accessories 1.
CONTROLS AND FUNCTIONS 2.1 Front panel STANDBY / ON Turn the power on/off. MENU Shows the menu application. Channel Change channel, move menu, or input frequency value. Volume Control volume, change item on menu or input frequency value.
Rear panel 2.2 Rear panel IP Connection Network interface IF INPUT It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL. LOOP It sends signal to the another receiver. YPbPr Component analog video signal. S-VIdeo It provides high definition screen. AUDIO It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable. VIDEO It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
CONTROLS AND FUNCTIONS 2.3 Remote Control Unit Open the controller cover on the back and insert two batteries (AAA - 1.5V). POWER Turn the power on/off. TV/SAT Select between TV Channels and Satellite channels for RF output. Numeric(0~9) Change channel or input frequency value. F. BK It is to move to previous channel. AUDIO Select Stereo, Main or Sub from multi language channels available. CLEAR Clear wrong number input or delete channel from TV (Radio) list or favorite channel list.
Remote Control Unit OK Select menu or value on menu item. INFO Shows the information of current channel. Click the INFO button twice, EPG mode will be displayed. When pressed in channel list channels will be sorted in alphabetical order A-Z. GUIDE Shows EPG[Electronic Program Guide] FAV Add TV or Radio channel to the favorite list on Edit TV(Radio) Channels, or watch favorite channel from your favorite list. SIZE Select between standard 4:3 and wide 16:9 screen sizes. ZOOM 2 times zoom in mode.
Connections 3.1 Connecting to the TV, VCR and Satellite Antenna It is not necessary to adjust power, as the product is of free - voltage (110~220V ) 1. Connect the RF cable from the TV OUTPUT on the satellite receiver to a TV and connect the RF modulate on the VCR and the TV ANT.IN. 3. Connect an antenna to the LNB socket on the VCR or other receiver and cable of the satellite dish to the DIGITAL on the satellite receiver. 3.
Connecting to the TV 3.3 Connecting to the TV, HiFi system and 0/12V switch 1. Connect the RCA cable from the VIDEO INPUT on the TV to the VIDEO on the satellite receiver. 2. To use 0/12V switch, connect one cable of the 0/12V switch to the 0/12V on the satellite switch and connect another cable to the DIGITAL on the satellite receiver. 3. Connect a RCA stereo cable from the AUDIO RL on the satellite receiver to the AUDIO RL on the HiFi system.
Settings and Operations 4.1 Basic Settings If it is the first time using a receiver, you should set parameters for system configuration. Refer to the following section. 1. Turn on your TV and Satellite receiver. 2. Press the MENU button, main menu screen will appear as shown below. 1. Select Installation on the Main Menu. 2. Select LNB Power. 3. If LNB Power is independently supplied from outside source, set the LNB Power OFF. Otherwise set it ON. 4.
DiSEqC 1.2 Limit Settings If you have a DiSEqC 1.2 motoried system to control your satellite antenna you have to make the following setting. First, you must select ON on DiSEqC 1.2 of LNB Setting in Please refer to the TP Configuration section > the TP Configuration. < 1. Select DiSEqC 1.2 Limit Settings of the installation. 2. You should set the East Limit and West Limit of your satellite antenna If you use the satellite receiver at first.
Settings and Operations to search for the position of a satellite manually. Store Stores the current position of the motor for the selected satellite name. Goto Moves the motor to the stored position of the selected satellite name. You have to know valid value for your LNB at first. 1. Select TP Configuration of the installation. 2. Select correct name of Satellite. If there is no proper satellite name listed in the item, select one from any of USER1 ~ USER 19. 3.
TP Configuration 4. For universal type of LNB, select Universal from LNB Type item and input the LNB frequency value on Freq.High and Freq.Low by using VOL or numeric key. For standard type of LNB, select Standard from LNB Type and input correct value on Freq.. 5. While only 1 antenna is in use, set the 0/12V switch and DiSEqC mode. to Disable. In case of STANDARD, select OFF from 22KHz.