Other functions 4.3 Other functions Audio Selection If broadcasting channel is supporting multi language, different language can be selected from Audio Selection. 1. To select different language on current channel, select Audio Selection on the Main Menu. 2. Press OK button on your favorite language. According to different audio data on each channel, up to 4 different audio language types can be selected. TV Guide Press GUIDE button of RCU for channel information. This function works in digital mode only.
Settings and Operations order(transparency - Teletext only - Opacity) INFO Hold of current Teletext page PAGE UP/DOWN Move previous and next page in one CH UP/DOWN Move previous and next page in one FAV/TV/RADIO/F.BK/LANG/AUDIO 100/200/300/400/500/600 page level 0~9 Select Teletext page EXIT Exit teletext mode Clock Function - From the Front Pannel Menu button The clock shows 12:00 o’clock on the front panel when the power is off.
Others functions 2. By pressing "VOL " key, you can select a frame one by one. Selected frame will provide you a live picture. 3. By pressing ”CH “ key, you can change the channel in the selected frame. 4. Press “Exit” key, then the function goes to the full screen mode. 5. If you press “OSD” key one more time in the No.1 stage above, you will have 13 divided pictures and operations are same as above.
Settings and Operations 4.4 System Settings Please make sure to press OK button always, after the changing items of System Settings. • Language Setting Select the language which you desire to display on the screen for your system. Press OK button to get in more options. Audio language Only if a current channel contains 2 or more audio language information, set the Audio Language as English or other favorite language. Then press OK button for its confirmation.
System Settings Please select the primary and secondary languages in your area. TV Standard Except for a few, most countires are using PAL system for TV signal, accordingly set TV Standard as PAL. To be more flexible for NTSC or PAL signal from different satellites, select MULTI for automatic signal conversion. Then press OK button for its confirmation. Time Adjustment To set the receiver time for EPG(Electronic Program Guide), set the time according to GMT(Greenwich Mean Time) by using CH .
Settings and Operations TV Aspect Ratio Select 4:3 for normal TV or 16:9 for wide TV. Then press OK button for its confirmation. If 4:3 ratio is selected on normal TV for wide channel, both left and right side of the screen will be a bit trimmed. If 16:9 ratio is selected on normal TV for wide channels the screen trim symptom will not occur. However the screen will be in narrow view. Wide screen will be properly viewed, only when wide channel is broadcasting.
System Settings 4.5 Game Select Game on the Main Menu. 1. To play game. Select Game & Press OK. 2. Select play mode by using number buttons & press Exit to Exit. 3. Select the color & press OK. 4. Now play the game.
Appendix 5.1 Troubleshooting SYMPTOM SOLUTION No picture display and no LED channel display Check the power connection No picture display with normal LED channel display 1. Check the connection with TV 2. Check the connection between TV outside input and receiver cable 1. Check the LNB, Frequency, Polarization and Symbol Rate from Installation menu 2. Check the connection of receiver or Antenna angle 1. Check between sound output connector and TV 2.
Glossary 5.3 Glossary LNB Low Noise Block converter. The LNB is an electronic unit mounted on satellite dish to receive signals reflected by the dish and convert to signals. L.O. frequency Local Oscillator frequency as a part of LNB. It converts the satellite frequency to usable signals for the receiver. Polarization Polarization allows several programs to be fitted into same frequency band.
Appendix NTSC National Television Standards Committee PAL Phase Alternate Line Ku band 11~18GHz Frequency C band 3~4GHz Frequency SCPC Single Channel Per Carrier MCPC Multi Channel Per Carrier PID Packet Identifier. TP TransPonder SCART, RCA A connector for connection of Satellite receiver, VCR and TV sets. VCR Video Cassette Recorder.
Made in Korea
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.