DIGITAL SATELLITE RECEIVER DSR-101 PLUS + User’s Guide
FOR YOUR SAFETY Information contained in this manual is subject to change without notice. No part of this publication may be copied, reproduced, or translated to another language for any purpose. FOR YOUR SAFETY • Be sure to read the user manual before starting the operation of the receiver. •Do not open the housing. The receiver contains high-voltage components and parts. • Even after switching off the receiver still contains high-voltage for a while. • Do not expose to rain or moisture.
CONTENTS For Your Safety 1. Before Getting Started 1.1 Main Features 1 1 1.2 Accessories 2 2. Controls and Functions 2.1 Front Pannel 3 3 2.2 Rear Pannel 4 2.3 Remote Control Unit 5 3. Connections 3.1 Connecting to the TV, VCR and Satellite Antenna 7 7 3.2 Connecting DiSEqC switch 7 3.3 Connecting to the TV, HiFi system 8 4. Settings and Operations 4.1 Basic Settings 9 9 4.2 Viewing TV(or Radio) 14 4.3 Other functions 18 4.4 System Settings 20 5. Appendix 5.
BEFORE GETTING STARTED 1.1 Main Features • Easy Menu Function • TV Guide Function • RF Output Function • Electronic Program Guide(EPG) for On Screen Channel Information • Software Upgrading Function Through RS-232C Cable by PC • Perfect DiSEqC 1.
Accessories 1.
CONTROLS AND FUNCTIONS 2.1 Front pannel STANDBY ON Turn the power on/off. Volume ◀ ▶ Control volume, change item on menu or input frequency value. Channel ▲ ▼ Change channel, move menu, or input frequency value. OK Select menu or value on menu item. MENU Shows the menu application.
Rear pannel 2.2 Rear pannel DIGITAL It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL. OUT It sends signal to the another receiver. AUDIO It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable. VIDEO It provides composite video output. Connect the Video on TV to VIDEO with RCA cable. TV ANT IN The signal supplied to this connector from a TV antenna will be sent to TV antenna output. Connect a TV antenna to TV ANT IN.
CONTROLS AND FUNCTIONS 2.3 Remote Control Unit Open the controller cover on the back and insert two batteries (AA - 1.5V). POWER Turn the power on/off. TV/SAT Select between TV Channels and Satellite channels for RF output. FAV Add TV or Radio channel to the favorite list on Edit TV(Radio) Channels, or watch favorite channel from your favorite list. SIZE Select between standard 4:3 and wide 16:9 screen sizes. F. BK It is to move to previous channel. TV Change to TV mode from radio channel.
Remote Control Unit MENU Shows the menu application. Page UP/DOWN Move to previous/next page on TV(Radio), Favorite Channels or Edit TV(Radio) Channels. EXIT Exit from the menu. Volume ◀ ▶ Control volume, change item on menu or input frequency value. Channel ▲ ▼ Change channel, move menu, or input frequency value. OK Select menu or value on menu item. INFO Shows the information of current channel. Click the INFO button twice, TELETEXT mode will be displayed. GUIDE Shows the broadcasting information.
Connections 3.1 Connecting to the TV, VCR and Satellite Antenna It is not necessary to adjust power, as the product is of free - voltage (110V ) 1. Connect the RF cable from the TV OUTPUT on the satellite receiver to a TV and connect the RF modulate on the VCR and the TV ANT.IN. 3. Connect an antenna to the LNB socket on the VCR or other receiver and cable of the satellite dish to the DIGITAL on the satellite receiver. 3.
Connecting to the TV 3.3 Connecting to the TV, HiFi system and 0/12V switch 1. Connect the RCA cable from the VIDEO INPUT on the TV to the VIDEO on the satellite receiver. 2. To use 0/12V switch, connect one cable of the 0/12V switch to the 0/12V on the satellite switch and connect another cable to the DIGITAL on the satellite receiver. 3. Connect a RCA stereo cable from the AUDIO RL on the satellite receiver to the AUDIO RL on the HiFi system.
Settings and Operations 4.1 Basic Settings If it is the first time using a receiver, you should set parameters for system configuration. Refer to the following section. 1. Turn on your TV and Satellite receiver. 2. Press the MENU button, main menu screen will appear as shown below. 1. Select Installation on the Main Menu. 2. Select LNB Power. 3. If LNB Power is independently supplied from outside source, set the LNB Power OFF. Otherwise set it ON.
DiSEqC1.2 Limit Settings 4. After completion of LNB Power setting, go back to Installation menu by pressing MENU. If you have a DiSEqC 1.2 motoried system to control your satellite antenna you have to make the following setting. First, you must select ON on DiSEqC 1.2 of LNB Setting in the TP Configuration. < ☞ Please refer to the TP Configuration section > 1. Select DiSEqC 1.2 Limit Settings of the installation. 2.
Settings and Operations Movement In User mode this is used to tune the position of the motor. In Installer mode this is used to search for the position of a satellite manually. Store Stores the current position of the motor for the selected satellite name. Goto Moves the motor to the stored position of the selected satellite name. You have to know valid value for your LNB at first. 1. Select TP Configuration of the installation. 2. Select correct name of Satellite.
TP Configuration 4. For universal type of LNB, select Universal from LNB Type item and input the LNB frequency value on L.O.Freq. and L.O.Freq.Low by using VOL ◀ ▶ or numeric key. For standard type of LNB, select Standard from LNB Type and input correct value on L.O.Freq.. 5. While only 1 antenna is in use, set the 0/12V switch and DiSEqC mode to Disable. In case of STANDARD, select OFF from 22KHz.
Settings and Operations To find not only TP information but also all the channels from current satellite, select Network Search. Note Depending on certain TP or satellite, the Network Search function may not work. 10. To use the Multi Search function, connect the DiSEqC switch or set the DiSEqC 1.2 of Installation. You can search all the channels from the satellites which you select. Select the satellites by FAV button, and press Multi Search. 11.
Viewing TV 4.2 Viewing TV(or Radio) 1. Press the Power button. 2. Press the TV(or Radio) button. 3. If you want to see all TV channel list, click the MENU button and then select the TV Channels(or Radio Channels). TV Channels(or Radio Channels) window will appear. Click the , you will see current Satellite name box. Select any satellite in the satellite name box, only the TV list of selected satellite will be displayed. VOL ◀ Viewing Favorite Channel 1. Press FAV key. 2. Select a CH ▲ ▼.
Settings and Operations Edit TV Channels / Edit Radio Channels From these menus you can creat and edit channel list. Press OK button from Edit TV Channels and similar screen will be shown as below. Arrange channel To change the channel orders from TV List, press OK button from your desired channel. Then you should move to desired number by pressing CH ▲ ▼, after then press OK button. Its orders will be changed.
Help Function Help function You can see the functions of each button in Edit TV List. Select the HELP button. Sort If you want to sort channels in order, select the SORT button in Edit channels. You can select the order you want. Lock Channels From here you can lock channels in any of the lists in order to prevent your children from watching. If you have the password already and want to lock a certain channel, press F.BK button at the desired channel.
Settings and Operations Edit Channel Name 1. Press INFO button on Edit TV or Edit Radio list. Cursor will be moved by using VOL ◀ ▶ , CH ▲ ▼. 2. Press OK button on desired alphabet. To delete pre-selected alphabet, press CLEAR button. 3. To change character set(upper, lower, number), press INFO button. By using MENU button, it will be automatically stored and moved to previous menu. Parental Control If you use this funciton you have to enter the password everytime you start this satellite receiver. 1.
Other Functions 4.3 Other functions Audio Selection If broadcasting channel is supporting multi language, different language can be selected from Audio Selection. 1. To select different language on current channel, select Audio Selection on the Main Menu. 2. Press OK button on your favorite language. According to different audio data on each channel, up to 4 different audio language types can be selected. TV Guide Press GUIDE button of RCU for channel information. This function works in digital mode only.
Settings and Operations PAGE UP/DOWN Move previous and next page in one CH UP/DOWN Move previous and next page in one FAV/TV/RADIO/F.BK/LANG/AUDIO 100/200/300/400/500/600 page level 0~9 Select Teletext page EXIT Exit teletext mode Clock Function - From the Front Pannel Menu button The clock shows 12:00 o’clock on the front panel when the power is off. If user press MAIN button, the 12:00 o’clock is on and off continually and then user can set up the time using the VOL, CH, OK buttons.
System Settings 4.4 System Settings Please make sure to press OK button always, after the changing items of System Settings. Audio language Only if a current channel contains 2 or more audio language information, set the Audio Language as English or other favorite language. Then press OK button for its confirmation. Menu Language For menu language selection, select desired language from Menu Language of system Settings. Audio mode Select desired audio mode among Stereo, Main or Sub.
Settings and Operations Time Settings Use clock, sleep, on/off Timer function by choosing time settings menu. 1. Press CH(▲▼) buttons or number buttons to set the local time. 2. Set the time STB turns on with on Timer setting menu. 3. Select a channel you wish to see in running the on Timer function. 4. Set the time STB turns off with off Timer setting menu. TV Aspect Ratio Select 4:3 for normal TV or 16:9 for wide TV. Then press OK button for its confirmation.
S/W Version RF mode If the satellite receiver is connected to the TV with a RF cable, you have to set the RF mode, which is dependent on the country where the satellite is being used. 1. Select the accurate RF System type of country the satellite receiver is used. 2. Select the Channel No(Select a channel of RF output of TV set that you are using). 3. Select TV or SAT on the RF out. Color 1. The color change from OSD display menu screen is available from 1 to 4 on Color Set.
Appendix 5.1 Troubleshooting SYMPTOM SOLUTION No picture display and no LCD channel display Check the power connection No picture display with normal LCD channel display 1. Check the connection with TV 2. Check the connection between TV outside input and receiver cable 1. Check the LNB, Frequency, Polarization and Symbol Rate from Installation menu 2. Check the connection of receiver or Antenna angle 1. Check between sound output connector and TV 2.
Glossary 5.3 Glossary LNB Low Noise Block converter. The LNB is an electronic unit mounted on satellite dish to receive signals reflected by the dish and convert to signals. L.O. frequency Local Oscillator frequency as a part of LNB. It converts the satellite frequency to usable signals for the receiver. Polarization Polarization allows several programs to be fitted into same frequency band.
Appendix NTSC National Television Standards Committee PAL Phase Alternate Line Ku band 11~18GHz Frequency C band 3~4GHz Frequency SCPC Single Channel Per Carrier MCPC Multi Channel Per Carrier PID Packet Identifier. TP TransPonder SCART, RCA A connector for connection of Satellite receiver, VCR and TV sets. VCR Video Cassette Recorder.