OWNER'S MANUAL CT500 DAB TUNER CT500
Safety Information Specifications Contents Thank you for purchasing this product, please read the manual carefully before operating, and reserve it for future reference. General Safety Information.........................................1 Specifications................................................1 Panel Controls ..............................................2 Button Tips....................................................3 Bluetooth Functions ......................................
Panel Controls (1) - Microphone (2) - Enter Source menu (3) - Radio/DAB mode: Adjust volume (rotate) Select preset station in preset mode (rotate) Tune in manual mode (rotate) Confirm / Switch (press) - MP3 / BT music mode Adjust volume (rotate) Play/pause (press) - Other mode Previous/Next option (rotate) Confirm (press) (4) - Power on - Mute (short press) - Power off (long press) (5) - Enter Audio menu (short press) - Enter Setup menu (long press) (6) - Answer/Dial/Call transfer/H
Button Tips SETUP DISPLAY DIM CLOCK CLK DISP TIMER BT MIC SEL AUTO ANS AUTO CON TALK VOL PBUPDATE DEVICE RING TONE CALLERID DAB+ DAB-FM DAB ANT FM/AM SELECT AREA DX MODE SET FM AF TA TP FM MW LW RDS EON PTYMUSIC VOL BEEP START BEEP AUDIO TR VOL PASSWORD ON/OFF PWD SET REMOTE SWRC SET CAN SET RESET CONF RST LANGUAGE AUDIO FADER FRONT 7 TO REAR 7 BALANCE LEFT 7 TO RIGHT 7 EQ CENTER EQ OFF JAZZ POP CLASSIC ROCK SUB LPF 80HZ SUB LPF 120HZ SUB LPF 160HZ CUS
Button Tips MP3 Playback Track skip Press the [ / or next track. ] button to go to the previous Folder select Long press the [ / folder back/ahead. ] button to select MP3 Audio setting Press [ ] button, and Rotate the knob to select FADER/BALANCE/EQ/LOUD NESS /SUB function, rotate the knob to adjust. System setting On the non time display menu: P ress and hold [ 1. ] button more than 2 3. Then press and rotate the knob to set DIM/ CLOCK/CLOCK DISP/CT CLOCK/TIMER mode.
Button Tips (regardless of the current mode) and begin broadcasting the announcement at TA volume level. After the traffic announcement is over, it will return to the previous mode and volume level. When TA is turned on, SEEK, SCAN, AMS function can only be received or saved when traffic program identification (TP) code is received. In ADJ mode, rotate the knob to adjust S-VOL 5-30.
Bluetooth Functions Pairing 1. Open the device's BT function, 2. Search bluetooth equipments by your device. Please make sure your device be detectable (through the menu on the device). 3. Select unit "CT500 DAB" to connect.(“1234” by default) Press [ ] button more than 2 seconds, and the Bluetooth device will be disconnected (only in A2DP mode or phone use). AUTO CON mode Press [ ] button more than 2 seconds. Press and rotate the knob to display "BT", "AUTO CON", and select on or off.
DAB function DAB Radio Selection DAB/DAB+ Provides radio programs in digital sound quality. To access Digital Audio Broadcast (DAB) press the [SRC] button and select DAB DAB Service SCAN "Synchronising" If the antenna is not connected, ""No signal"" will be displayed. If the tuner has never been used, ""No service"" will be displayed. Automatic scan: The radio will initiate an automatic scan of the DAB transmitters for the first operation, or if the DAB transmitters is lost.
DAB function DIM DISP Select "DIM KEY" and adjust the brightness from the display diffusion.fr/aftersale/ DAB FMLK Switching automatic between DAB and FM (DABFMLNK). When the DAB signal quality drops significantly, it is preferred to switch and listen to the service via FM. Switching between DAB and FM (DABFMLNK) can be disabled via the system settings menu.
Other functions USB functions(flash memory type) Timer function AUX mode If the device is switched on while the ignition is on, it then switches off and on again automatically with the ignition. This is provided that the A7 contact is connected to the terminal 15/30 (après contact ou "ignition key") of the vehicle. If the device is switched on without the ignition by pressing " ", it switches off again after 120 minutes to save the battery. The device can then be switched on again with " ".
Wiring Diagram A USB Connector B Radio Antenna C D E DAB Antenna NO. 8 6 4 7 5 3 1 8 6 4 2 7 5 3 1 8 7 6 5 4 3 2 1 E 6 5 4 3 2 1 D 2 NO.
FCC FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
TROUBLESHOOTING The following checklist can help you to solve some issues which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell can cause fire or electric shock, immediately stop using it and call the save where you purchased it. Issue General The unit does not switch on. No sound The unit or screen does not work normally.
ZA du Chevalement - Rue des Galeries 59286 ROOST WARENDIN - FRANCE Phone : +33 (0)3 27 94 44 44 Fax : +33 (0)3 27 94 44 45 Web : www.ams-diffusion.
