Copyright © 2012 Amroad Technology Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form or by any means without the express written permission of Amroad Technology Inc. To obtain consent, write to the attention of Amroad Technology Inc. Document No. DB3100R 2012-0402 www.amroad.com.tw DISCLAIMER Amroad reserves the right to change product specification without prior notice.
Contents Copyright Chapter 1: Introduction 1 Welcome 1 General Application of Door Entry System 2 Unit in Luxury Apartment Building 2 Use of SIP 3 Chapter 2 : Knowing Video Door Phone 5 Package Contents 5 Front Panel 6 Rear Panel & Side View 7 Dimensions 8 Chapter 3 : Installing Video Door Phone 9 Suggested Installation Position 9 View Angle 9 Installion Procedures 10 1. Prepare Flush-Mounted Box 10 2. Secure Flush-Mounted Box on Steel Frame 11 3.
Chapter 4 : Use of the Video Door Phone 17 Making Calls From Video Door Phone 17 Answering Calls on IP Video Phone 17 Open the Door 17 Common Controls 17 DB3100R RFID Card Usage 18 Issue Master RFID Card First Time 18 Issue a New Card with Master RFID Card: 18 Wall Lamp and RFID LED Indicators 19 Status LED 20 Audio Announcement 21 Chapter 5 : Configuring Video Door Phone 23 Finding Video Door Phone on Networks 23 Entering Web User Interface 24 System - Basic Settings 25 Syst
Upgrade –Upgrade 40 Upgrade –Configuration 41 AR APS 42 Functions Performed by the IP-PBX (Compatible with Amroad IP-PBX) 43 Appendix A : IO Application 45 Electronic Lock 45 Wiring Connection and Web Page Setup 45 Electronic Bolt 45 Electronic Strike 47 Appendix B : Regulatory Information 49 FCC STATEMENT 49 FCC Radiation Exposure Statement 49 CE DECLARATION OF CONFORMITY (EUROPE) 50
MANUAL FOR SYSTEM INTEGRATOR Chapter 1: Introduction Welcome Thank you for choosing this Video Door Phone. This device is designed to work as Video Door Phone of inside large building to form a SIP-based door entry system. Besides taking advantages of IP technologies, this device links to other SIP devices. It will work with most IP PBX systems supporting audio and video, and it can be configured via a web interface.
DB3100R VIDEO DOOR PHONE General Application of Door Entry System There are two major series of Video Door Phone: community series and single unit series. They are applied on different conditions. DB3100R is designed for Unit in Luxury Apartment Building Application. It can work with IPBX servers to communicate with other SIP-based devices. DB3100R works not only as an intercom system but is also able to integrate RFID card reader and connect to other SIP devices to form a complete door entry system.
MANUAL FOR SYSTEM INTEGRATOR Use of SIP SIP, initial of Session-Initiation-Protocol, it is an application-layer control (signaling) protocol for creating, modifying, and terminating sessions with one or more participants. These sessions include Internet telephone calls, multimedia distribution, and multimedia conferences.
DB3100R VIDEO DOOR PHONE Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Chapter 2 : Knowing Video Door Phone Package Contents The following items are included in your Video Door Phone package. Check this list before installation to ensure that you have received all items. 1. Video Door Phone Main Unit 2. Front Panel 3. Flush-Mounted Box 4. 2-pin Terminal block 5. 5-pin Terminal block + Cord End Terminal (7 pieces) 6. Screw Pack 7. Relay Board 8. Long Screws (x4) 9. Short Screws (x2) 10. Screws (for firmness in concrete) 11. Master RFID Card 12.
DB3100R VIDEO DOOR PHONE Front Panel Figure 5: Front Panel Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Rear Panel & Side View Figure 6: Rear Panel & Side View 7 Amroad Technology Inc.
DB3100R VIDEO DOOR PHONE VOID Sticker There is a “VOID” sticker on the left side of the DB3100R. This VOID sticker is used to prevent opening the case and tampering concealment. Amroad shall not be responsible under warranty if the VOID sticker is broken or removed. WARNING: “VOID” means “WARRANTY VOID IF SEAL BROKEN” Amroad shall not be responsible under warranty if the VOID sticker is broken or removed. Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Dimensions Figure 7: Dimensions 9 Amroad Technology Inc.
DB3100R VIDEO DOOR PHONE Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Chapter 3 : Installing Video Door Phone Suggested Installation Position The view angle of the lens module is limited, so the installation position for Video Door Phone is crucial. The video door phone comes with a Flush-Mounted Box.
DB3100R VIDEO DOOR PHONE Installion Procedures 1. Prepare Flush-Mounted Box Before installing the Flush-Mounted Box, you can fasten four screws on Flush-Mounted Box as shown in Figure. This will make Flush-Mounted Box be mounted on the wall more firmly and securely after grouting foam concrete. Use a Plug to connect Corrugated Tube to FlushMounted Box. The corrugated tube allows cable and wirings to pass through. The cable and wirings are Ethernet cable, DC power, and Relay control.
MANUAL FOR SYSTEM INTEGRATOR 2. Secure Flush-Mounted Box on Steel Frame Before attaching Plaster Board and grouting Foam Concrete on the wall, it’s necessary to secure FlushMounted Box on Steel Frame. The heights of the Steel Bars for installing FlushMounted Box are suggested as shown in Figure. The height between the bottom of the Flush-Mounted Box and floor is 141 cm. And the depth of the FlushMounted Box is 47.2mm. Use four Drill Screws to secure Flush-Mounted Box on Steel Bars in the Steel Frame.
DB3100R VIDEO DOOR PHONE 3. Wire and Cable Connection Wire and cable go through wall and corrugated tube, and are used for DC power, network connection, and relay control. There are IO connectors on the rear side of the DB3100R. They are for DC power, Ethernet port (RJ-45 connector), and GPIO wire. Please refer to the Figure and following section- GPIO & Relay Control. For space saving, AR Relay Board can be placed on the top of the rear side and connect GPIO wires.
MANUAL FOR SYSTEM INTEGRATOR 4. Installing DB3100R Unit Before installing DB3100R on the wall, Flush-Mounted Box should be first mounted on the wall firmly. The following diagram shows the detail on how to install DB3100R Unit into Flush-Mounted Box. Secure DB3100R Main Unit to Flush-Mounted Box by tightening four long screws. Then, attach Front Panel by putting front cover on DB3010R Main unit and firmly press Front Panel to snap into DB3100R Main Unit.
DB3100R VIDEO DOOR PHONE GPIO (General Purpose Input/Output) & Relay Control The following table explains input and out put pins of GPIO and Relay Control. Port definition GND Description Connect to Ground (GND) DI2 (Digital Input port 2) DI1 (Digital Input port 1) DO2 (Digital Output port 2) DO1(Digital Output port 1) DI2 is used to connect to PIR (Movement Detector, Intruder Detector). DI1 is used for is used for detecting whether the door is closed or not.
MANUAL FOR SYSTEM INTEGRATOR Connecting to Ground Wire To prevent power surge and lighting strike from damaging DB3100R, Flush-Mounted Box should be connected to the ground wire (earth wire) of the building. Connect the wire of DB3100R to Flush-Mounted Box as shown in Figure. Remember to tighten the screws on both sides. NOTE: Flush-Mounted Box should be connected to the ground wire (earth wire) of the building. Power Switching for DB3100R should also be connected to the ground wire (earth wire).
DB3100R VIDEO DOOR PHONE Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Chapter 4 : Use of the Video Door Phone Making Calls From Video Door Phone Using the Video Door Phone is quite easy. You will see “Door bell” on the front side. Press “ Door Bell ” button to make a call. Answering Calls on IP Video Phone To answer the call from Video Door Phone on IP Video Phone is the same as a normal call. You may answer with following ways: • Pick up the handset. • Press the SPEAKER button. • Press “Answer” soft-function key.
DB3100R VIDEO DOOR PHONE DB3100R RFID Card Usage Residents scan RFID card on the scanning zone. DB3100R will verify the database to determine whether to Open door or not. Issue Master RFID Card First Time Without any cabling, just scan RFID card on the DB3100R scanning zone when the DB3100R device 1st time on-line. The RFID card will be seen as Master RFID Card. NOTE: 1.
MANUAL FOR SYSTEM INTEGRATOR Wall Lamp and RFID LED Indicators On the top of the DB3100R’s front panel, there are white light LEDs for acting as Wall Lamp. When doorbell is pressed, wall lamp turns on gradually and projects diffuse light. When the conversation is ended, wall lamp turns off slowly. The 3-color LED indicator is located under the doorbell botton for information and status of scanning RFID card.
DB3100R VIDEO DOOR PHONE Status LED There is another 3-color LED Indicator hidden behind the front panel at the bottom-right corner. Once DB3100R is out of order, this LED helps technical support staff in troubleshooting. Green LED OFF OFF Blinking (3-sec On , One-sec Off) OFF Blinking (Green-> Blue->Red) OFF Blinking 3 times (0.5-sec On/Off) OFF OFF OFF OFF Amroad Technology Inc. Red LED Blue LED Description OFF ON for 1 second OFF OFF Normal Condition (SIP Mode) Boot is initiated.
MANUAL FOR SYSTEM INTEGRATOR Audio Announcement To fit some specific scenarios, DB3100R will automatically play following audio announcement to remind residents. Audio Announcement Scenario “Please Scan Your New Card” DB3100R plays this audio announcement after scanning Master RFID Card on RFID scanning zone and user is ready to issue new card.
DB3100R VIDEO DOOR PHONE Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Chapter 5 : Configuring Video Door Phone Finding Video Door Phone on Networks The default connection type setting of the Video Door Phone is “DHCP Client”, it is a typical network mode. There is a software utility provided by your local distributor or local dealer which is able to help you to find your Video Door Phone when using dynamic IP address. Please execute following utility: AmRoad Search Tool.exe You will see a window pop up on screen.
DB3100R VIDEO DOOR PHONE Entering Web User Interface Input the IP address of this product on your browser, then you will see home page of the Video Door Phone appearing. Web UI is protected by Login ID and Password. Press the “Login” button, then you will see input fields: Login ID and Password. Please key in the correct ID and password, and then press second “Login” button to enter Web UI. The default ID and password are: Login ID: admin Password: admin NOTE: 1.
MANUAL FOR SYSTEM INTEGRATOR System - Basic Settings Item Device ID Date & Time Set New Date and Time TimeZone Description This ID is a unique number that assigned by manufacturer. Here shows date and time set on this video door phone. These fields allow user to set correct date and time according to the local–standard. You may synchronize phone time to match your PC by pressing “Sync with PC” button. This field allows you to select your time zone to fit your location.
DB3100R VIDEO DOOR PHONE System - Networking Settings Item MAC Address Description This is a quasi-unique identifier attached to most network adapters. IP Type The default value is DHCP Client. There are three options: DHCP Client, Static IP and PPPoE. A. DHCP Client: The system will automatically assign your Video Door Phone an IP address. B. PPPoE: This allows you to set Internet connection with ID Account and Password. C. Static IP: Save Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR System Login Name The default ID and password for system login are admin and admin. User may change his Login ID and Password on the webpage by entering new Login ID and Password. Figure 21: Login Name System Reboot When user needs to reboot DB3100R remotely, just click “Reboot” button on this webpage to start this action. After confirm rebooting, Web User Interface will back to the home page, but the video door phone may take 30~60 seconds to restart its system.
DB3100R VIDEO DOOR PHONE Streaming Settings – Video You may set change the video settings in this page. Item Bandwidth Codec Priority– Power Line Frequency CMOS Static Brightness CMOS Color Balance Description You may select preferred bandwidth for video and audio streaming. There are 4 options: 128Kbps, 256Kbps, 384Kbps, and 512Kbps. Please check which bandwidth is suitable for you with your service provider. Default setting is 256Kbps. First – You may select the Video streaming priority H.263.
MANUAL FOR SYSTEM INTEGRATOR Item Save Descrition Click this button to save your setting. NOTE: If DB3100R can’t get the correct value of the CMOS brightness in some environment, please adjust the brightness value via IP Video phone by pressing “2”(brighter) or “8”(darker) during conversation. 31 Amroad Technology Inc.
DB3100R VIDEO DOOR PHONE Streaming Settings – Audio Item Code Priority Scene Description You may select the Audio streaming priority – G.711. Select Disable, Enable or User Define. When “User Define” is selected, the following two items appears: Noise Threshold (db): Default: -40. The voice intensity that is lower than the value (-40db) will be neglected.
MANUAL FOR SYSTEM INTEGRATOR SIP Settings You may setup advanced SIP service parameters in this page: Item Display Name Description Authentication This name will show on the IP phones of called parties. You can fill in the preferred name here. For example, Doorphone Account Password NOTE: Please enter Doorphone in the field of Display Name. When Door Bell is pressed, there will be “Doorbell” sound, and enable “Preview Picture” function on Amroad IP Video Phone/Video Indoor Station.
DB3100R VIDEO DOOR PHONE Item Description SIP Registrar Server IP Address You may fill in the IP address of SIP Registrar Server here. Registrar Expire Set the time for SIP registration authorization Time The default is 3600 seconds. Media Timer This setting allows your video door phone to force release automatically a conversational call when your (0~180) phone doesn’t receive any media packets from the remote side during a period of time.
MANUAL FOR SYSTEM INTEGRATOR Entrance Settings – Extensions You may configure call services in this page: Item Called Party Extension Number Called Out Extension Number Alarm will be triggered while stealing Service Description Fill in the extension number. When Door Bell button is pressed, the device will dial to the extension number. (The extension number or group that is assigned by IP PBX.) NOTE: In the Peer-to-Peer mode, you need fill in the complete extension number and IP address. e.g. 102@10.3.
DB3100R VIDEO DOOR PHONE Item Descrition ICMS_ Server Setting Amroad ICMS (Intelligent Community Management Server) Service You can enable or disable the function of ICMS_ Server Setting. Notice ICMS IP Enter the IP address of ICMS Server. ICMS will receive the message when Internal Alarm is triggered. Notice ICMS Enter the port number of ICMS Server. The default Port Number is 7778. Port ICMS will receive the message when Internal Alarm is triggered.
MANUAL FOR SYSTEM INTEGRATOR Item SMTP server Password TLS Mail To Save Descrition Input SMTP server Password. Set enable/disable for mail transmission that “Confirms Client to the Server identity” action is needed or not. TLS (Transport Layer Security) is a network protocol that ensures privacy between email servers on communicating applications. Input e-mail address which you want to send to. Click this button to save your setting. 37 Amroad Technology Inc.
DB3100R VIDEO DOOR PHONE Entrance Settings – GPIO You may configure GPIO in this page: Item Descrition DO1 Service DO1 Service is used to connect with AR Relay Board to control“Electronic Door Lock”. The function can be triggered by the following ways. A. Using Registered RFID Card B. During conversation, you may press “#” keypad to open door. Device Relay Out- You can select Positive/Negative to connect to Posiput tive/Negative- triggered Electronic Door Lock.
MANUAL FOR SYSTEM INTEGRATOR Item Descrition Device Relay Out- You may select the voltage polar “High” or “Low” for triggering. put Trigger By Digit The Digit Input 2 (DI2) is a trigger point for DO2 Service. Input 2 It depends on the voltage polar “High (Low->High)” or “Low (High->Low)”. Save NOTE: DI2 is used to connect to PIR (Movement Detector, Intruder Detector). Click this button to save your setting.
DB3100R VIDEO DOOR PHONE Entrance Settings –RFID You can get the related RFID information and delete the issued RFID Cards here. Item Descrition Master Card This field will display the card number of the Master Card. By default, this field is null. This master card can issue new cards for the new tenants. By factory default, this field is null, you can scan a new RFID Card, and it can be set as Master Card.
MANUAL FOR SYSTEM INTEGRATOR Item Descrition Erase RFID Number You can input the specific issued RFID card number in the field and press Erase RFID Card to delete it. 41 Amroad Technology Inc.
DB3100R VIDEO DOOR PHONE Upgrade –Upgrade This section allows you to upgrade firmware of DB3100R through network. Item Hardware Version Software Version Language Select Application Pack Descrition This field shows hardware version number. This field shows current firmware version number. This field shows the language of speech announment. Press “Browse” button and select Application Pack from your local disk. NOTE: Application Pack and Software File should be uploaded at the same time.
MANUAL FOR SYSTEM INTEGRATOR Upgrade –Configuration Item Import File Upload Export File Download Descrition User may press Browse button to select the location of the configuration file to import, which you may previously save to a local directory through the Export File option. After selecting the configuration file, you can press Upload button to start the importing. You can also use Export File to back up DB3100R settings on your computer.
DB3100R VIDEO DOOR PHONE AR APS Adminstrator can perform system management function through this AR APS (Auto Provision Server) webpage. Item APS_Server Descrition This allows adminstrator perform system management through the following URL. APS_Server: https://rc.amroad.com.tw/aps/TaServlet/ doorphone.php Save Click this button to save your setting. Figure 31: AR APS Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Functions Performed by the IP-PBX (Compatible with Amroad IP-PBX) Simultaneous Ring –The Distribution Policy is set to Ring All. e.g. When a visitor calls the group call (say extension 500), group members (say extensions 155, 157, and 166) will all ring simultaneously. Call Forwarding – Enter a number to which incoming calls are forwarded when unanswered. The number could be an extension or a PSTN number with appropriate outbound prefix.
DB3100R VIDEO DOOR PHONE Amroad Technology Inc.
MANUAL FOR SYSTEM INTEGRATOR Appendix A : IO Application Electronic Lock The DB3100R can connect with various Electronic locks, including Electronic Strikes, Electronic Bolts and Electromagnetic locks. Wiring Connection and Web Page Setup There are two types of Electronic door lock applications as below. One is Electronic Bolt, and the other is Electronic Strike. For more Electronic locks, please follow the similar method for connection.
DB3100R VIDEO DOOR PHONE When the wire connection is completed, we need to select the “Positive” for Electronic Bolt on the GPIO page of Entrance Setting on DB3100R WEB User Interface. DI1 (Trigger Default) : High (Low->High) DO2 (Trigger Default) : High ->Low DI2 (Trigger Default) : High (Low->High) DI1 is used for is used for detecting whether the door is closed or not. Once DI2 is triggered, DO2 will turn on external light for 30 seconds.
MANUAL FOR SYSTEM INTEGRATOR Electronic Strike Electronic Strike • The Electronic Strike is opened when +12 V is supplied. • The Electronic Strike is closed when +12V is not supplied. This function can let you press the pound ( # ) key on IP Video Phone/Video Indoor Station to open the door during answering the doorbell. When the wire connection is completed, we need to select the “Negative” for Electronic Strike on the GPIO page of Entrance Setting on DB3100R WEB User Interface.
DB3100R VIDEO DOOR PHONE Amroad Technology Inc.
DB3100R VIDEO DOOR PHONE CE DECLARATION OF CONFORMITY (EUROPE) Manufacturer declares that this product conforms to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC: • • • EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment EN 609 50 Safety EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment Caution: This equipment is intended to be used in all EU and EFTA countries.
MANUAL FOR SYSTEM INTEGRATOR 53 Amroad Technology Inc.