MOVE remote User manual MOVE remote - Use it to control MOVE devices
Table of Content 1 2 Warnings and general precautions for safety .......................................................................................................... 3 1.1 General warnings .............................................................................................................................................. 3 1.2 Use warnings .....................................................................................................................................................
1 WARNINGS AND GENERAL PRECAUTIONS FOR SAFETY Read these warnings carefully before you continue installing, connecting and using MOVE remote hereinafter called the product. It is very important that you follow the safety and warning instructions written in this manual to ensure a safe use of the product. Keep these instructions. Heed all warnings. Only use the product as described in these instructions.
2 REGULATORY AND SAFETY NOTICES Model name: MR1904 2.1 FCC WARNINGS FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
3 PRODUCT DESCRIPTION AND INTENDED USE Note: MOVE remote is intended exclusively for use to control MOVE devices. Any other use is absolutely prohibited! The manufacturer is not liable for damage resulting from any use of the product other than the intended use specified in this manual. Functional characteristics of the product: - MOVE remote is a remote to control MOVE devices.
Note: Make sure to install batteries with the correct polarity orientation in the battery compartment Note: Only use LR03/AAA batteries Pic 2, Battery overview 1. Plastic cover 2. Batteries To access the batteries, remove the plastic cover (pic 2, position 1) at the back side of the MOVE remote. It is important to insert batteries of the correct type (LR03/AAA) with the correct orientation. Positive and negative terminals are always marked at the batteries.
4 PAIRING WITH A SMARTPHONE APPLICATION First download the MOVE application from either Google Play or Apple Store. Once the application is installed do the following: 1. Put the application in pairing mode. 2. Press and hold the stop button (pic 1, position 4) until A is visible by the indicator LED:s (pic 1, position 1). 3. Follow instructions in the application. 5 PAIRING WITH A MOVE DEVICE Do the following: 1.
7 FACTORY RESET In order to clear all settings and go back to the default state of a MOVE remote, a factory reset can be performed. To do this: 1. Push and hold down the stop button (pic 1, position 4) until F is visible by the indicator LED:s (pic 1, position 1). When F is indicated by the LED:s, release the stop button. 2. After the stop button is release the MOVE remote will perform a factory reset and then reboot.
Disposal and recycling information You must dispose of MOVE properly according to local laws and regulations. Because MOVE contains electronic components, MOVE must be disposed of separately from household waste. When MOVE reaches its end of life, contact local authorities to learn about disposal and recycling options, or simply drop it off at your local Teptron retail store or return it to Teptron. MOVE packaging materials must be disposed of in full compliance with local regulations.