User and Installation Guide Multi-Channel Audio Transmitter Model T800
Contents Unpacking ................................................................................. 3 Connecting the transmitter ........................................................ 3 Placing the transmitter ............................................................... 7 Pairing the transmitter and wireless devices ............................. 7 Troubleshooting ......................................................................... 9 Technical specifications .......................................
User and Installation Guide User and Installation Guide Unpacking: Check that this package contains: One iFinity Digital Audio transmitter - Model T800, one 7.5 V AC adapter (wallwart), four short speaker cables, two audio cables. Connecting the transmitter The transmitter has two stereo audio inputs, one zone-A and one zone-B input. 4 audio channels can be transmitted simultaneously.
User and Installation Guide User and Installation Guide LEGAL LIMITATIONS Transmitter audio inputs REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. WE SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS EQUIPMENT, NOR FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS EQUIPMENT.
User and Installation Guide User and Installation Guide Limited warranty WHAT YOUR WARRANTY COVERS L DC 7.5V A R L B This warranty extends only to the original user of the equipment (“you”, ”your”) and is limited to the purchase price of each part. Amphony and its affiliated companies (”we”, ”our”, ”us”) warrant this Multi Channel Audio Transmitter against defects in materials or workmanship as follows.
User and Installation Guide User and Installation Guide CLEANING • Unplug the product before cleaning. • When the system gets dirty, wipe it with a clean, soft cloth. If necessary, wipe it with a soft cloth, slightly dampened with soapy water. Wipe dry immediately with a dry cloth. • Never use benzene, aerosol cleaners, thinner, alcohol or any volatile cleaning agent. • Do not use abrasive cleaners, as they may damage the finish. L DC 7.
User and Installation Guide Placing the transmitter Ideally, the transmitter should be placed at an elevation such that there are no obstacles between the transmitter and wireless receivers or amplifiers (line of sight) in an area where there will be the least amount of traffic. We suggest that you place the transmitter on top of your audio source. Pairing the transmitter and wireless devices In order for the transmitter to transmit to wireless devices (audio receivers, wireless speakers etc.
User and Installation Guide User and Installation Guide Technical Specifications: Audio transmission: Digital, bidirectional, adaptive FHSS Transmitter frequency: 2410-2478MHz Number of wireless audio channels: 4 Network Status Light Operating range: - max. 300 ft line of sight - max. 60 ft through walls and obstacles Compatible wireless receivers: - Model R800 wireless audio receiver - Model 880 wireless audio amplifier Max.
User and Installation Guide User and Installation Guide Troubleshooting Problem Possible Cause Solut ion Problem Possible Cause Solut ion T he transmit light does not go on after DC power is applied to the transmitter T he transmit light goes out after a few seconds and does not light again Faulty AC adapter or faulty power outlet Check the power outlet and the AC adapter; if possible, check for correct voltage of the AC adapter.
