User and Installation Guide 5.
LEGAL LIMITATIONS REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. WE SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS EQUIPMENT, NOR FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS EQUIPMENT. UNDER NO CIRCUMSTANCES SHALL OUR LIABILITY, IF ANY, EXCEED THE PURCHASE PRICE PAID FOR THIS EQUIPMENT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW.
User and Installation Guide R Limited warranty Unpacking: Check that this package contains: WHAT YOUR WARRANTY COVERS One 5.8 GHz Digital Audio transmitter, one 5.8 GHz Digital Audio receiver, two AC adapters, two dual RCA audio cables. This warranty extends only to the original user of the equipment (“you”, ”your”) and is limited to the purchase price of each part.
User and Installation Guide R NON-USE PERIODS • When the product is not being used for a long period of time, unplug the product. CLEANING • Unplug the product before cleaning. • When the system gets dirty, wipe it with a clean, soft cloth. If necessary, wipe it with a soft cloth, slightly dampened with soapy water. Wipe dry immediately with a dry cloth. • Never use benzene, aerosol cleaners, thinner, alcohol or any volatile cleaning agent. • Do not use abrasive cleaners, as they may damage the finish.
R User and Installation Guide IMPORTANT SAFETY INFORMATION Using the transmitter speaker audio input: R User and Installation Guide ATTENTION! READ THESE SAFETY INSTRUCTIONS CAREFULLY AND HEED ALL WARNINGS IN THIS MANUAL. L POWER SOURCE To avoid product malfunction, and to protect against electric shock, fire or personal injury, please observe the following: • This product has been designed to work with 120-volt AC current using the supplied AC adapters.
User and Installation Guide Technical Specifications Transmitter: Audio transmission method: Digital Transmitter frequency: 5.8 GHz Error correction: 1/2 rate FEC Transmitted data rate: > 3 Mbps Transmitter operating range: max. 200 ft. line of sight, max. 50 ft.
R User and Installation Guide Step 3 Connecting the receiver The receiver connects to a line-in interface of an active speaker or external amplifier via the supplied RCA cable. Problem Possible Cause Solution Audio drops out intermittently or crackles Strong interference Interference preventing proper reception of the audio signal can be caused by 5.8 GHz cordless telephones or wireless networks.
R User and Installation Guide Troubleshooting Problem Receiver Possible Cause Solution The transmit light does not go on after DC power is applied to the transmitter The transmit light goes out after a few seconds and does not light again Faulty AC adapter Check the power outlet and or faulty power outlet the AC adapter; if possible, check for correct voltage of the AC adapter. No audio present at Check the audio connection audio input to the transmitter and ensure that there is audio present.
User and Installation Guide Step 4 R R User and Installation Guide Operating the transmitter and receiver After powering up the transmitter, the transmit light will light for approximately 5 seconds while the transmitter initializes. Transmit light After initialization, the transmit light will go out. 5.8 GHz Digital Audio Transmitter Once audio is detected at the audio input, the transmit light will light and the transmitter will transmit the audio signal.
