Compatibility List

For setup videos and updated device compatibility lists:
amperetech.co/setup
amperetech.co/compatibility
To register your product, go to,
Amperetech.co/register
Welcome Message from Ampere
Thank you for purchasing Unravel. Unravel's unique three panel design allows you to
wirelessly charge three Qi-enabled devices simultaneously OR two Qi devices plus an
Apple watch.
Features
Fast charge automatically - All three Unravel panels have a fast 10W wireless charging coil.
The side panel without the Type-C PD input can also charge an Apple Watches.
Type-C PD input - Unravel should be used with an Ampere charger or certified Type-C PD
adapter from a reputable brand. For optimum performance, adapters should have a
minimum wattage of 60W.
Foldable design - multiple charging positions and easy to transport.
Low standby current - When there are no devices on the wireless charging panel or the
device(s) are fully charged then the power output will be less than .3 W.
Non-slip rings and runners - Silicon grips designed to keep your devices in place.
Pogo pins - For use in conjunction with the Ampere Power Bank for fast truly wireless
charging.
Overcharging protection -
Foreign object detection -
Low heat and overheating detection -
LED Indicator Lights - The LED lights on each panel indicates the status of each individual
pad.
· If the LED light is illuminated then the device is charging properly
· If the LED light is flashing then the device is not charging (because a metallic foreign object
was detected)
The wireless charging pads
charge automatically and on
contact. So simply plug in
Unravel then set any Qi-enabled
wireless charging device on the
panel to begin charging. There
are no buttons to press to
activate Unravel and, because it
has a low standby current, feel
free to leave it plugged in day
and night.