BA115HP BA210 Bassamp Cube User’s Guide
BA115HP/BA210 Bassamp Cube TABLE OF CONTENTS: Important Safeguards and Precautions . . . . . . . . . . . . . . . . . . . . .3 The Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5 The Electronic Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . .
BA115HP/BA210 Bassamp Cube IMPORTANT SAFEGUARDS AND PRECAUTIONS: All Ampeg products are designed for continuous safe operation, as long as common sense is used and steps are taken to help avoid certain problems. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord. To reduce the risk of electrical shock, NEVER remove or otherwise attempt to defeat the ground pin of the power cord.
BA115HP/BA210 Bassamp Cube THE TOP PANEL: 1 2 3 4 1. 0dB INPUT: Connect your “passive” bass guitar here using a shielded instrument cable. This input is not padded and is best suited for basses without active electronics. 2. -15dB INPUT: Connect your “active” bass here using a shielded instrument cable. This input is padded 15dB and is best suited for basses with active electronics and/or “hot” pickups. 3.
BA115HP/BA210 Bassamp Cube 9 10 11 10. CD INPUT: Use these RCA jacks to connect the line level (or headphones) output of a CD player, tape deck or rhythm machine to the amplifier. The inputs to these jacks are summed into a mono signal which is fed into the BA115HP/BA210’s power amplifier. The signal level from these jacks is adjusted by the amplifier’s Master control (#8).
BA115HP/BA210 Bassamp Cube THE ELECRONIC TUNER: The BA115HP/BA210 incorporate an active electronic tuner, built into the control panel. The electronic tuner is active whenever the amplifier is turned on, providing constant, “real-time” tuning. The bottom row of LEDs indicate which note (string) is being tuned. The top row of LEDs provides directional queues to facilitate quick and precise tuning of your instrument.
BA115HP/BA210 Bassamp Cube SYSTEM BLOCK DIAGRAM: TUNER A BC D EF G 0dB INPUT GAIN STYLE -15dB INPUT LOW HIGH MID HF LEVEL CD INPUTS HF SPEAKER L LIMITER R XO LF SPEAKER(S) MUTE POWER AMP MASTER HEAD PHONES BAL.
BA115HP/BA210 Bassamp Cube TECHNICAL SPECIFICATIONS: OUTPUT POWER RATING MAX INPUT LEVELS LINE OUT LEVEL HEADPHONE OUT LEVEL GAIN STYLE LOW MID HIGH SPEAKER SPECS POWER REQUIREMENTS SIZE AND WEIGHT 220 Watts at 4 ohms @5% THD 0dB Input: 2.00V RMS -15dB Input: 8.00V RMS CD Input: 7.75V RMS 1.
