BA-108 & BA-110 Bass Guitar Combo Amplifiers Owner’s Manual
BA-108 / BA-110 Bass Guitar Combo TABLE OF CONTENTS Important Safety Instructions..................................................2 Introduction / Features...........................................................4 Front Panel.........................................................................5-6 Rear Panel.............................................................................6 Block Diagram.......................................................................
BA-108 / BA-110 Bass Guitar Combo NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
BA-108 / BA-110 Bass Guitar Combo Introduction The Ampeg BA-series bass combos are perfect for beginning bassists, offering tools like 3-band EQ, MP3 input and a headphone out for silent practice. The high-output speaker is specifically matched to the powerful amplifier for optimal performance. Also great for live performances, these combos have a dedicated line out, perfect for additional support from a mixer or PA system.
BA-108 / BA-110 Bass Guitar Combo BA-108 / BA-110 Top Panel BA -1XX 4 5 7 2 8 1 0dB -15dB )NPUT 1 2 4 6 3 9 0 10 5 4 6 3 7 2 8 1 9 0 10 5 4 6 3 7 2 8 1 9 0 10 5 4 6 3 7 2 8 1 9 0 10 5 6 3 7 2 8 1 9 0 10 6OLUME 4REBLE -ID "ASS #$ ,EVEL 3 4 5 6 7 1. 0 dB INPUT: The signal output from a passive instrument may be connected to this 1/4" input by means of a shielded instrument cable. 2.
BA-108 / BA-110 Bass Guitar Combo BA-108 / BA-110 Top and Rear Panels BA -1XX 4 5 7 2 8 1 0dB -15dB )NPUT 1 2 4 6 3 9 0 10 5 4 6 3 2 8 1 9 0 5 7 2 8 1 10 4 6 3 7 9 0 5 7 2 8 1 10 4 6 3 9 0 10 5 6 3 7 2 8 1 9 0 10 6OLUME 4REBLE -ID "ASS #$ ,EVEL 3 4 5 6 7 (EADPHONES #$ )NPUT 8 9 /N 0OWER 10 11 11. POWER SWITCH: Use this switch to turn the overall system power on or off.
-15 dB 0 dB INPUTS BASS MID TONE CONTROL CIRCUITRY TREBLE VOLUME LINE OUT EFFECTS LOOP SEND RETURN CD INPUTS CD LEVEL 25 W [BA-108] 35 W [BA-110] POWER AMPLIFIER HEADPHONES OUTPUT 8" speaker [BA-108] 10" speaker [BA-110] BA-108 / BA-110 Bass Guitar Combo BA-108 / BA-110 Block Diagram: 7
BA-108 / BA-110 Bass Guitar Combo BA-108 / BA-110 TECHNICAL SPECIFICATIONS Output Power Rating 25 watts rms @ 8 ohms, 3% THD [BA-108] 35 watts rms @ 8 ohms, 3% THD [BA-110] Signal to Noise Ratio 67 dB (20 Hz–20 kHz, unweighted) [BA-108] 68 dB (20 Hz–20 kHz, unweighted) [BA-110] Maximum Gain @ 1 kHz 0 dB input: –15 dB input: CD input: Effects Return: Tone Controls Bass: Mid: Treble: Speaker Specs 1 x 8" speaker: 8 ohms, 40 W [BA-108] 1 x 10" speaker: 8 ohms,
