NOVO Security & Safety Button Quick Start Guide Model : SB42-SW Version 1.
Appearance LED Indicator Button (Textured) Button (Smooth) Key ring Holder Battery cover * Mount the bumper case on the unit body to relieve the external shock.
urning the power on Press and hold both buttons together until the LED light flashes followed by an alert sound and vibration. ccessing digital door lock Access secured areas by tagging the device to the RFID reader of the door. attery replacement When battery level is low, red LED flashes 2 times every 5 seconds. Loosen the screw bolt with a screwdriver and open the battery cover. Install the batteries (2 x AAA size) provided in the direction notated within each battery slot.
ctivating Emergency Mode Press and hold down both buttons for 3 seconds.§ (1) Message transmission Message will be sent 10 seconds after the alert sound, LED flashing and vibration. (2) To cancel message transmission Press and hold both buttons again within 3 seconds. § (3) Mute siren Press and hold textured button for 3 seconds. § (in case speaker mode “on” is set as default) § Trigger time is 3 secs as default and configurable.
afety Instruction IMPORTANT: Please read and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage the product. -DO NOT remove the battery when the device is running. -DO NOT drop, knock, or shake the device. -DO NOT disassemble as it may cause malfunctions.
evice Specifications Model Number MCU Connectivity Positioning RFID User Interface Mechanical Casing Battery Accessories Dimensions SB42-SW 32-bit Arm® based Cortex®-M0, 256KB + 1024Kb Flash Sigfox RC 2 Uplink Class0u (>20dBm EIRP) / Bluetooth LE 5.0, NFC Sigfox geolocation, Indoor WiFi positioning 13.
