MUSE-R Service Call Button Quick Start Guide Model : SB12 Version 1.
Appearance LED Indicator Button Micro-USB 5-pin connector Mounting bracket Double-sided adhesive tape Magnet Screws Feature Offer personal assistance services to your customers • A stationary button for service call with desk/wall mounting bracket • Simple & user-friendly design for a wide range of applications • Equipped with a rechargeable battery with micro-USB connector • Great convenience for customer service orders (consumer goods, office supplies, food, taxi, staff call, call back service, parcel
Turning the power on Activate NFC on your phone and tag it on to the bottom of your device. The indicator light will flash red when the device is powered on. Sending message When the button is pressed, the indicator light flashes red and the device sends a message. Charging the battery When the battery level is low, the red LED blinks twice every 5 seconds. To charge : (1)Plug the small end of the USB charging cable into the micro-B USB connector on your device.
Safety Instruction IMPORTANT: Please read and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage the product. - Do not use while it is charging. - Do not drop, knock, or shake the device. - Do not disassemble as it may cause malfunctions.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
