User's Manual

ManualsBrandsAMOD Technology ManualsElectronicsGSM/GPRS MODULE

ACM8060 Quad band GSM/GPRS

Module

Product Data Sheet

<V1.401>

AMOD Technology Co.,LTD

Subject to changes in technology, design and availability

URL: http://www.amod.com.tw

Add. 8F., No. 46, Lane 10, Jihu Road, Neihu, Taipei 11492, Taiwan, R.O.C.

Tel. +886-2-2657-8811; Fax +886-2-2657-9090; Email sales@amod.com.tw

Summary of content (11 pages)

PAGE 1
ACM8060 Quad band GSM/GPRS Module Product Data Sheet AMOD Technology Co.,LTD Subject to changes in technology, design and availability URL: http://www.amod.com.tw Add. 8F., No. 46, Lane 10, Jihu Road, Neihu, Taipei 11492, Taiwan, R.O.C. Tel. +886-2-2657-8811; Fax +886-2-2657-9090; Email sales@amod.com.tw ACM8060 Product Datasheet V1.
PAGE 2
PAGE 3
Date:2008/09/10 Version: 1.401 Status: Released AMOD ACM8060 module is a quad band GSM/GPRS communication module. It supports standard AT command and enhanced AT command which provide rich voice and data communication functions. It’s an ideal solution for various communication applications. ACM8060 supports PPP protocol which allows users to transmit data with PPP protocol. Product Introduction 1.1.
PAGE 4
Date:2008/09/10 Version: 1.401 Status: Released Product features AT COMMAND 50PIN B2B Connector SIM interface Audio interface Power interface GSC RF Connector Voice Communication SMS GPRS Data transmission CSD Service Supplemental service Group Service STK2 Descriptions GSM Standard AT COMMAND V.25 AT COMMAND AMOD defined AT COMMAND UART Interface（Maximum I/O speed: 115200bit/s） Standard SIM interface（3V/1.
PAGE 5
Date:2008/09/10 Version: 1.401 Status: Released UART1 UART0 Application Environment and Interface The application environment, connectors, and hardware interface design are described in this chapter. 1.4. Extreme conditions ACM8060 extreme environment conditions are described as below: Table 0-1 ACM8060 extreme condition specification Parameters Description MIN Ts Storage Temperature -40 Vi In/Out voltage at any pin -0.5 IIN Input current VESD ESD voltage - MAX +85 3.5 1000 ±2000 Unit ℃ V mA V 1.5.
PAGE 6
Date:2008/09/10 Version: 1.
PAGE 7
Date:2008/09/10 Version: 1.401 Status: Released 44 MIC1_N Mic 1 in negative 45 MIC2_P Mic 2 in positive 46 MIC2_N Mic 2 in negative 47 AUXOUTP AUX out 2 positive 48 AUXOUTN AUX out 2 negative 49 EARP Audio out 1 positive 50 EARN Audio out 1 negative ACM8060 module is used as DCE (Data circuit-terminating equipment). However to let customer connect DCE-DTE, the signal naming is provided here as DTE (Data terminal equipment) signal definitions. 1.5.2.
PAGE 8
Date:2008/09/10 Version: 1.401 Status: Released VIL IIH IIL VOH VOL CIN Input low voltage Leak current when high input Leak current at low input level Voltage output at high voltage Voltage output at low voltage Input capacitor -0.3 -2 2.39 0 - 0.8 2 3.00 0.40 15 V µA µA V V pF 1.8.2. Audio Interface ACM8060 audio interface reference testing value is as table 0-8, 0-9, 0-10 and 0-11.
PAGE 9
Date:2008/09/10 Version: 1.401 Status: Released Table 0-9 Operation current requirement Operation mode Min TYP Standby mode Talking mode 250 GPRS data 350(GPRS4+1) Power off mode - Max 3.8 100 Unit mA mA mA µA The peak current of ACM8060 is 2A. Power On/Off the module 1.10. General Description The power on and off procedures are described in this chapter. 1.11. Power On When the module is supplied with over 3.4V power and PWON signal is low (300ms), ACM8060 will be powered on. 1.12.
PAGE 10
Date:2008/09/10 Version: 1.401 Status: Released Mechanical Dimension 10/11 ACM8060 Product Data Sheet V1.
PAGE 11
Date:2008/09/10 Version: 1.401 Status: Released Appendix A FCC Statement 11/11 ACM8060 Product Data Sheet V1.