G47 Mobile Computing Device User's Manual Version 4.0 2018.
This page is intentionally left blank.
Revision History Version 1.0 Release Time November 2018 Description Initial release 2.0 Dec 2018 Add FCC warning 3.0 Dec 2018 Add CE warning 4.
Copyright Copyright © 2018 AMobile Intelligent Corp. All Rights Reserved. This document contains proprietary information protected by copyright. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Disclaimer The information in this document is subject to change without prior notice in order to improve the reliability, design and function. It does not represent a commitment on the part of the manufacturer.
Contents Contents Preface ...................................................................................................................v Declaration of Conformity ............................................................................................... v CE ............................................................................................................................ v FCC Class B ......................................................................................................
Preface Preface Declaration of Conformity CE Environmental Conditions Working Temperature -10 ~ 55℃ Working humidity 65+/-20%RH Hereby, Hong Kong AMobile Intelligent Corp. Limited Taiwan Branch, declares that this Mobile Computing Device/ PD470, is in compliance with the essential Requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
The following standards have been applied for the investigation of compliance: 5G ( if necessary) For 5150-5250 and 5725-5850 frequency band, Operations in the 5150-5250 and 5725-5850 band are restricted to indoor usage only. Product Name: Mobile Computing Device Model No.: Battery: G47 Manufacturer: Hong Kong AMobile Intelligent Corp. Limited Taiwan Branch DC 3.
Draft ETSI EN 301 489-1 V2.2.0 (2017-03) Final draft ETSI EN 301 489-3 V2.1.1 (2017-03) Draft ETSI EN 301 489-17 V3.2.0 (2017-03) Draft ETSI EN 301 489-19 V2.1.0 (2017-03) Draft ETSI EN 301 489-52 V1.1.0 (2016-11) ETSI EN 301 511 V9.0.2 (2003-03) ETSI EN 301 908-1 V11.1.1 (2016-07) ETSI EN 301 908-2 V11.1.1 (2016-07) ETSI EN 301 908-13 V11.1.1 (2016-07) ETSI EN 303 413 V1.1.1 (2017-06) ETSI EN 300 330 V2.1.1 (2017-02) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 328 V2.1.
Operation Frequency: GSM/GPRS/EGPRS 900: Tx: 880-915MHz, Rx: 925-960MHz GSM/GPRS/EGPRS 1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz GSM/GPRS/EDGE 850: 824-849MHz (Not used in Europe) PCS/GPRS/EDGE 1900: 1850-1910MHz (Not used in Europe) WCDMA Band I: Tx: 1920-1980MHz, Rx: 2110-2170MHz WCDMA Band VIII: Tx: 880-915MHz, Rx: 925-960MHz WCDMA Band II: 1850-1910MHz (Not used in Europe) WCDMA Band V: 824-849MHz (Not used in Europe) WCDMA Band IV:1710-1755MHz (Not used in Europe) LTE Band 1: Tx: 1920-1980MHz, Rx: 2110
The RF frequencies can be used in Europe without restriction. This product is intended for sale and application in a business environment. Emergency call If any emergency arises, dial 112/911 (or other emergency call number) for emergency help. Due to the nature of cellular networking, the success of emergency call is not guaranteed. FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
This Mobile Computing Device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. Thestandards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Preface RoHS AMobile Intelligent Corporation certifies that all components in its products are in compliance and conform to the European Union’s Restriction of Use of Hazardous Substances in Electrical and Electronic Device (RoHS) Directive 2002/95/EC. The above mentioned directive was published on 2/13/2003.
Preface Safety Symbols LASER RADIATION This symbol indicates that a potential hazard to personal safety exists from a laser source. When this symbol is displayed in this manual, pay special attention to the specific safety information associated with the symbol Important Safety Instructions Read these safety instructions carefully: 1. Read all cautions and warnings on the device. 2. Dropping it or letting it fall may cause damage 3. Make sure the correct voltage is connected to the device. 4.
Preface 8. Remove dirt with a lightly moistened cloth and a mild solvent detergent. Then wipe the cabinet with a soft dry cloth. 9. If the device will not be used for a long time, disconnect it from the power source to avoid damage by transient overvoltage. 10. Never pour any liquid into openings. This may cause electrical shock. 11. Never open the device. For safety reasons, the device should be opened only by qualified service personnel. 12.
Preface Do not use the power adapter that isn’t made for the device. Supplying the device with inappropriate voltage may cause harm to the battery or, even worse, burn the device. Laser Safety The device's barcode scanner that uses laser lights is a class 2 laser product. DO NOT stare into the laser beams or point the laser beam at anyone's eyes when the barcode scanner is in operation.
Preface • Long-Term Storage & Maintenance If you are putting away the device for more than three months, it is recommended that get recharged every three months. If you store with an uncharged battery, it could fall into a deep worn-out state which would render it incapable of holding any charge. Be sure to store the device at the proper temperature (as described in 1.5 Specifications).
Preface General Cleaning Tips You may need the following precautions before you begin to clean the device. When you clean any single part or component for the device, please thoroughly read and understand the details below. 1. We strongly recommended that you should shut down the system before you start to clean. 2. When you need to clean the device, please rub it with a piece of dry cloth. 3. Never get circuit board damp or wet. 4.
Preface Recommended Cleaning Procedures 1. Close all application programs 2. Close operating software 3. Turn off the device 4. Remove all peripherals 5. Disconnect the power cable 6. Proceed to clean. Disposing of the Device • Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
Preface Additional Information & Technical Support You can download the related technical documents such as datasheet and user’s manual as well as driver on our website. Please do not hesitate to call or e-mail our customer service when you still cannot get the information you need. http://amobile-solutions.com/web_en/contact.php E-mail: support@amobile.com.tw Warranty This product is warranted to be in good working order during the warranty period.
1 Chapter 1 Introduction -1-
Introduction 1.1 Product Highlights • Fully rugged for warehousing / transportation / medical / retail applications • 1.5M (5ft.
Introduction 1.2 Package Contents Upon opening the package, carefully inspect the contents. If any of the items is missing or appears damaged, contact your local dealer or distributor.
Introduction 1.
Introduction 1.
Introduction 1.5 Specifications Durability Features 1.5M (5ft.) drop-resistance System CPU octa-core processor MTK 8768 4*A53 2.0GHz/4*A53 1.5GHz OS Android™ 9 Memory 2GB Storage 16GB Integrated microphone Audio Integrated speaker Peripherals and Devices Camera Front: 5.0 megapixel camera Rear: 13.0 megapixel AF camera with LED Accelerometer (G-sensor) Sensor 3-axis digital gyroscope E-Compass/Proximity Sensor Light Sensor Ambient light sensor WLAN Integrated IEEE 802.
Introduction LCD Display Size/Type 5” TFT LCD Resolution 1280 x 720 Touch Screen Type 5-point Projected Capacitive Touch screen Corning® glass coating w/ anti-reflection coating Power Supply Power System Lithium-ion battery Lithium-ion rechargeable battery Battery Type non-replaceable Battery Capacity 4000mAh Battery Life Up to 8 hours battery life Adapter Input Input: AC100~240C, 50~60 Hz Adapter Output DC power output: 5V/2A, 9V/2A, 12V/1.5A Mechanical & Environmental Storage Temp.
This page is intentionally left blank.
2 Chapter 2 Getting Started Chapter 2 Getting Started -9-
Getting Started 2.1 Installing microSD and SIM Card To install the microSD card and/or SIM card: Figure 2-1 Pull out the plug Figure 2-2 Insert the small hole with a metal pin Figure 2-3 Take out the SIM Tray when it pops up. Figure 2-4 As the diagram shown, insert SIM Card and TF Card.
Getting Started 2.2 Charging the Battery Due to shipment, the battery is partially drained when the package is delivered to you. Be sure to charge the battery to full when you are charging it for the first time. Caution: Do not charge the PD470 via computer USB connection due to that the voltage output from computer USB is not enough to charge the device. 2.2.1 Charging the Battery To charge the battery using a electrical outlet: 1.
Getting Started 2.3 Installing/Replacing the Battery Please contact qualified service personnel for battery replacement. 2.4 Optimizing Battery Life To optimize the operating time of the battery, it is recommended that you do the following: • Decrease the LCD display brightness. • Set a shorter timeout of inactivity to allow the screen enter sleep mode. • Turn off the display if you are not using it. • Always exit the applications if it is not in use.
This page is intentionally left blank.