User's Guide

AMOSENSE Smart Band (Model No. : BDTB-100) [English ver] Quick User Guide v2020.0901
AMO Smart band BDTB-100
Quick Start Guide
Body temperature
Heart rate
Blood pressure
Blood oxygen
Respiratory rate
Step monitoring
Korean. 2020. Rev.1.0
Product Specifications
• Model No. BDTB-100
•
Connectivity 2.4GHz Bluetooth LE 4.2
• Sensor
Dual temperature(Skin/Core), Blood pressure
Blood oxygen, Heart rate, Activity, Respiratory rate
• User Interface 1.3” TFT Display(240x240 HD)
Touch button, Vibrator
• Power supply Lithium-polymer 3.7V, 105mAh
• Size Display : L 41 x W 35 x H 10.3 mm
Wrist band : 260 mm
• Weight 107.8g
Getting Started
BDTB-100 is advanced tracking smart band that gives you all-day
vital sign stats(skin/core temperature, heart rate, blood pressure,
blood oxygen, respiratory rate, all-day activity, sleep quality).
• BDTB-100 should usually rest a finger’s width below your
wrist bone and lay flat (as you’d normally wear a watch).
• Do not wear the band too tight; a tight band restricts blood
flow, potentially affecting the heart rate signal.
• BDTB-100 is not medical device, and is not intended to
diagnose, treat, cure or prevent any disease.
• BDTB-100 is waterproof, but if you sweat a lot or the product
gets wet, the accurate readings may not be displayed.
Remove sweat or moisture before wearing.
1
Appearance
① Display area ② Touch button
③ Charging port
④ Heart rate sensor
⑤ Body temperature sensor
③
①
④
②
⑤
Charging product
• To charge the band, plug charging cable into USB port on
your computer or USB wall charger and plug other end into
the port on the back of the band.
• When the battery level reaches 10%, a low battery warning and a
vibration will sound. Charging completely takes 2-3 hours.
※ Battery life time may vary depending on the environment the
device are used in.
Instruction
▶ Vital sign monitoring
▶ Power on/off
• BDTB-100 automatically tracks the following stats every 10 min
• When using the product for the first time, you can turn on the
: skin/core temperature, heart rate, blood pressure, blood oxygen,
product by pressing the button for 3 seconds. Charge the battery
respiratory rate, all-day activity.
sufficiently before use. You can turn off the power on the device
• For real-time measurement, wait for about 5 seconds without
setting page.
moving from the BDTB-100 measurement screen to another
screen, and the measured value will be displayed on the screen.
▶ Home Screen
Pressing the touch button moves to the next screen in sequence.
• There are 3 types of home screens: 1) graph type, 2) analog
type, and 3) digital clock type. If you press and hold the
button for more than 3 seconds on each home screen, the
theme is sequentially changed to the next theme.
Dual temperature
Heart rate
Blood pressure
measurement
measurement
measurement
Theme 1
Theme 2
Theme 3
Blood oxygen
Respiratory rate
Step count
▶ Social Distancing
measurement
measurement
▶ Setting
• When someone approaches within 2m, the vibration will sound
• If you press the button for more than 3 seconds
3 times and a warning message will appear on the screen for
on the device setting screen, you can enter device
5 seconds. It checks every 10 minutes to check and record the
setting page. There are 4 setting pages(Wake-up
information of nearby devices.
gesture, Brightness adjustment, Device reset,
Device Power off)
• Pressing the touch button moves to the next
screen in sequence. You can change setting
by pressing the button for more than 3seconds
on each setting page.
2
3
4
Cautions
IMPORTANT: Please read and comply with all of the instrucons provided
in this manual before using the device. Failure to comply with the
instruc ons given in this manual and/or using the device in ways other
than the ones men oned in this manual may result in serious injury
and/or damage the product.
- Do not charge in voltage over 5V/2A.
- Do not charge the product while it is wet.
- Do not wear the product while charging it.
- Do not place your product in a dishwasher, washing machine, or dryer.
- This product is splash and rain proof. It should not be worn while
showering or swimming.
- Do not use the device in corrosive liquid or excessive heat environment.
- Do not open the enclosure or disassemble the product. If the product is
disassembled arbitrarily, the waterproof or dustproof func on may be
damaged.
- This product features a built-in ba ery, which is not user replaceable.
Tampering with your product or a emp ng to open it will void the
warranty and can result in a safety hazard.
- Use only the charger that shipped with your product.
- This product is not a medical device, and is not intended to diagnose,
treat, cure, or prevent any disease.
Bluetooth connection
-Android 4.4 and above and iOS 8.2 and above :Open SmartHealth
APP“Click connect device” in homepage -- Device list --Searching Device--
Connect corresponding device--Connect successful.
This material contains CONFIDENTIAL and PROPRIETARY informa on of AMOSENSE Co.,
Ltd. or its affiliates and may be legally PRIVILEGED. You may not use, disclose,
reproduce or distribute the informa on without AMOSENSE's authoriza on.
5
5