Product Information

ManualsBrandsAmimon ManualsElectronicsWireless Video Transmission Module

Modules Draco Regulatory Statements for FCC and IC

The following statements are required on the regulatory guide provided to the end-user and

OEM:

Applicable models:

AMN41012, AMN42012

1.1.1 Product Information

This product is designed to be compliant with rules and regulations in the country it is sold to

and therefore is marked as required. These marking signify the countries the device is approved

in. Operating the product without regulatory approvals is illegal.

Please make sure you use the latest revision of this document which is available at https://TBD.

Local language translation of this guide are obtained at: https://TBD

Country Approvals: The product usage is subject to approval obtained in countries per marking

on the device. For DoC, please refer to: https://TBD

Antenna: The product is provided with an approved antenna. Use only supplied or approved

antenna by AMIMON. Any changes or modifications to the Antenna may void the regulatory

approvals obtained for the product.

Modifications: Any changes or modifications not expressly approved by AMIMON or the party

responsible for compliance could void the user’s authority to operate the equipment.

1.1.2 RF Modules:

These devices contain the following approved radio modules:

Device

Description

FCC ID

AMN41012

HD Video Transmitter

7680A-AMN41012

VQSAMN41012

AMN42012

HD Video Receiver

7680A-AMN42012

VQSAMN42012

1.1.3 RF Exposure

The product complies with internationally recognized standards covering human exposure to

electromagnetic fields from radio devices. To satisfy local RF exposure regulation requirements,

the transmitting product must operate with a minimum separation distance of 20 cm or more

from a person’s body.

FCC RF Exposure Statement

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20

centimeters between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Summary of content (6 pages)

PAGE 1
Modules Draco Regulatory Statements for FCC and IC The following statements are required on the regulatory guide provided to the end-user and OEM: Applicable models: AMN41012, AMN42012 1.1.1 Product Information This product is designed to be compliant with rules and regulations in the country it is sold to and therefore is marked as required. These marking signify the countries the device is approved in. Operating the product without regulatory approvals is illegal.
PAGE 2
Industry Canada Statement IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE IMPORTANTE: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
PAGE 3
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
PAGE 4
Industry Canada Statement for Operation at 5GHz Range Caution: 1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. 3.
PAGE 5
    WARNING – do not touch. Please beware of hot surfaces of the devices and wait until it cools off. Please avoid electrostatic discharge from the antenna ports for proper operation Keep these instructions in a safe and accessible place for future use. Declared maximum operating temperature: +TBD°C Notice for OEM to include in their user documentation: This module in its final integration requires the end-product to continue to comply with DFS requirements.
PAGE 6
d) The identification, by name, address, and telephone number, or internet contact information, of the responsible party who assembled the product from modular components. The responsible party for an SDoC must be located within the United States. e) Copies of the compliance information statements for each authorized component used in the system that is authorized under SDoC. OEM Labeling Requirements Notice: The OEM of final integrator must ensure that FCC and IC labeling requirements are met.