User's Manual

ManualsBrandsAmimon ManualsElectronicsTxStickPro

Important Information

Please read this user manual before you use this product, it contains all the notes, and instructions regarding

the operating this product. In accordance with safety precautions and operating instructions listed on this user

manual applies, provided the product is handled properly for its intended use, but may not apply to the cases

below:

• Repairs of product modification and alternations have been executed by unauthorized

personnel.

• The damages are caused by accidents including but not limited to lightning, fire, exposed to

rain, water or moisture.

• The damages are caused by the use of the provided power adapter with power voltages which

are not compliant with the rated voltage range in the attached label of the power adapter in

the package.

• The model label on the product has been modified or the warranty tag has been removed by

unauthorized personnel.

Safety Precaution

To reduce the risks of electricity, do not remove or open the cover. No use

serviceable parts are inside. Please return to original factory for maintenance.

To reduce the risks of electricity, do not remove or open the cover. No use serviceable parts

are inside. Please return to original factory for maintenance.

Please use our standard power adapter. For detailed information, please refer to the rated

voltage range showed on the label at the back of power adapter.

Summary of content (11 pages)

PAGE 1
Important Information Please read this user manual before you use this product, it contains all the notes, and instructions regarding the operating this product. In accordance with safety precautions and operating instructions listed on this user manual applies, provided the product is handled properly for its intended use, but may not apply to the cases below: • Repairs of product modification and alternations have been executed by unauthorized personnel.
PAGE 2
Danger: Be careful with electricity • As connecting any equipment (such as any player or TV, etc.), please turn off the power of the product before any operation is undertaken. • Power outlet: to prevent electric shock, fire or short circuit, please make sure the type of electrical plug used on the receiver’s and transmitter’s power cord are compliant with the rated voltage range in the attached label of the power adapter in the package.
PAGE 3
Special Notice • Although the product has provided the function of data encryption when transmitting, you still need to pay attention to deliberate signal interception. There will be the possibility of a third party intentionally intercept the transmission signal since the product adopt wireless communication. Please do not use the product on confidential communication, or life-related communication.
PAGE 4
1. AMN31292 Block Diagram 2. Features 1. Uncompressed and uncompromised FHD video quality 2. Supports 40MHz channels for supreme video quality and high rate video/audio signals 3. Supports WHDI, Unicast, Multicast 4. Supports HDMI 5. Strong 256-bit/128-bit AES based encryption 6. Supports MIMO technology 7. Supports OSD display 8.
PAGE 5
3. Performance parameters Number Item Unit Specification 1 Transmitter & Receiver Frequency GHz 5.15~5.25, 5.25~5.35, 5.47~5.725, 5.725~5.
PAGE 6
4. AMN31292 Product Appearance and Interface Definition 1 2 3 4 5 1. Registration button: The registration button is used in order to register the transmitter to additional receivers, in Unicast or Multicast products. 2. VIDEO status LED: The VIDEO LED is used to indicate the video connection status. 3. NETWORK status LED: The NETWORK LED is used to indicate the wireless network state. 4. HDMI Input port: The HDMI input port is used to connect the video source to the transmitter. 5.
PAGE 7
1. AMN36223 Block Diagram 3.3V 2.8V DC Circuitry 5V Power Socket 1.8V 1.
PAGE 8
3. Performance Parameters Number Item Unit Specification 1 Transmitter & Receiver Frequency GHz 5.15~5.25, 5.25~5.35, 5.47~5.725, 5.725~5.
PAGE 9
4. 1 AMN36223 Product Appearance and Interface Definition 3 6 4 5 2 1. Power Input Port: The 5v power supply provided with the system should be connected to the power input port. 2. HDMI Output port: The HDMI output port is used to connect the receiver to the video sink, using a HDMI cable supporting HDMI 1.3 3. Mini USB port: The mini USB port is used for SW upgrades and logs collection. 4. NETWORK status LED: The NETWORK LED is used to indicate the wireless network state. 5.
PAGE 10
FCC Caution: Any changes or modifications not expressly approved by the responsible party could void the user’s authority to operate this equipment. Notice: The module in its final integration requires the end-product to comply with DFS requirements. A Class II Permissive Change may be required for operation not already described in the FCC grant filling. OEM Labeling Requirements NOTICE: The OEM or final integrator must ensure that FCC labeling requirements are met.
PAGE 11
The applicable usage is to be used as a wireless device, connected to the back of a camera, or other video source and transmitting video to a monitor, or any other video sink, with less than 1msec delay. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules.