FCC ID: UOSAM313
Please note All the functions in this manual should be operated in Standby Mode Like the picture below.
Make a call Select Input the numbers, Press Send Answer a call. Press the Tips: *Down Key to volume down *Up Key to volume up.
Call log You can seeing the call list in the call log > > call log
Contacts To browse the name card holder, store, edit and delete the names and phone numbers in the phone and SIM card.
Message To receive and send the message. Write Message > >Write message You could write message by using this function。 In box > >Inbox Store the SMS and Push message received > Out box >Outbox Store the SMS you’ve sent in failure. Drafts > >Drafts Store the SMS you’ve edited. Sent box > >Sent box Store the SMS you’ve sent successfully.
Multimedia FM Radio Please connect with the earphone You can listen in to Fm radio freely.
Bluetooth Turn on or off Bluetooth. Bluetooth settings: click to automatically search for and display the Bluetooth devices list, touch the Menu button, the Bluetooth name rename detection timeout setting, display the received file Note: A. display device name, search the device name is too long, it will automatically truncated to the appropriate length. B. select pairing the device will pop up a dialog box, the user needs to enter the Bluetooth PIN match code. The two devices must use the same password.
Internet Press > >Internet service *Depends on network support.
Settings You can customize the settings, such as time and date, language etc.
Ring settings: Press > Choose the Options To customize the ring settings options>settings
Calculator Press > > Calculator
Thank You!
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.