User’s Manual Mobile Phone Model: AM206 FCC ID: UOSAM206 1
TABLE OF CONTENT 1. BASIC INFORMATION .................... 6 1.1. BRIEF INTRODUCTION........................................... 6 2. BEFORE USE ..................................... 7 2.1. NAME AND EXPLANATION OF EACH PART ............. 7 2.1.1. Appearance Sketch Map ........................... 7 2.1.2. Description of the Standby Pictures .......... 7 2.1.3. Description of Keys .................................. 8 2.2. INSTALL SIM CARD AND MEMORY CARD ........... 10 2.2.1. SIM Card .......................
. QUICK USER GUIDE ..................... 15 3.1. DIAL A CALL ....................................................... 15 3.2. REJECT A CALL ................................................... 15 3.3. RECEIVE A CALL ................................................. 15 3.4. END A CALL ........................................................ 16 3.5. EMERGENCY SERVICES ....................................... 16 3.6. EXTENSION SPEED DIAL ..................................... 16 3.7.
.1.5. Delete All ................................................ 20 4.1.6. Call timer ................................................ 20 4.1.7. Call Cost.................................................. 21 4.2. CONTACTS .......................................................... 21 4.3. FILE MANAGEMENT ............................................ 22 4.4. MULTIMEDIA ...................................................... 24 4.4.1. Camera .................................................... 24 4.4.2.
4.5.10. Message capacity .................................... 36 4.6. TOOLS ................................................................ 37 4.6.1. Calendar .................................................. 37 4.6.2. Alarm ...................................................... 38 4.6.3. Calculator ................................................ 38 4.6.4. Torch Light ............................................. 39 4.6.5. Bluetooth ................................................. 39 4.6.6. STK ........
1. Basic Information 1.1. Brief Introduction Thanks for selecting C121 color screen GSM digital mobile phone. Through reading the manual, you can fully know how to use C121 mobile phone, appreciate its complete function and simple operating method. C121 color screen mobile phone is designed aiming at GSM/GPRS network environment; the phone is Two Card Two Standby, but you can not call another SIM card when one SIM card is under phone call.
manual without prior notice. 2. Before Use 2.1. Name and Explanation of Each Part 2.1.1. Appearance Sketch Map The picture is only for your reference. 2.1.2. Description of the Standby Pictures Network signal strength The more the stripe is, the stronger the signal is. When SIM card 1s inserted in card slot 1, standby screen will show the icon. Network signal strength The more the stripe is, the stronger the signal is. When SIM card 1s inserted in card slot 2, standby screen will show the icon.
Battery strength The full the fill is, the more electric quantity is. Standby screen will show the icon. Silent mode When scene mode is set as mute mode, standby screen will show the icon. Vibrate mode When scene mode is set as Vibration mode , standby screen will show the icon. Outdoor mode When scene mode is set as high ring and vibrate mode, standby screen will show the icon. Indoor mode When scene mode is set as low ring mode, standby screen will show the icon. 2.1.3.
shows. 2. In the standby mode, press Left Soft key to access Menu, Right Soft key to access Contacts. Navigation key On other interfaces, it equals to navigation key and direction key except for special functions. Dial key 1. Press this key to dial or receive an incoming call. 2. When in the standby mode, press this key to access Dialed Calls. OK key In the dial panel mode, press this key to show or hide dial panel. End key Number key 1. Mainly used as power on/off. 2.
On the standby interface, input 0; after inputting telephone number, if you want to input extension number, please press twice asterisk key, after the display screen shows “+”, please input your extension number. 0 Key 1. In text editing interface, press "#" key to switch text the input method. 2. On the standby interface Press and hold "#" key to transfer the profile of Normal/Silent/Vibrate. # Key 2.2. Install SIM Card and Memory Card 2.2.1.
You can take out SIM card from your phone, and use it in any GSM mobile phone (new mobile phone can read SIM card automatically). In order to avoid losing or damaging the information saves in SIM card, please don’t touch the metal contact surface, and place SIM card in the place that away from electricity and magnetic force. Once SIM card is damaged, you can’t use the phone normally. Prompt: Please make sure to power off the phone before taking out SIM card.
can take out SIM card. Prompt: Without special explanation inserting two SIM cards are defaulted in the manual. If you just insert one SIM card, maybe some options of the menu will not be shown. 2.2.3. Memory Card Aim at the T card slot and push the T card gently, and the card will be inserted correctly. Prompt: If the memory card is failed, please check whether it is correctly placed and good contact of metal point. 2.3. Battery 2.3.1. Install the Battery Take off the rear cover, of the mobile.
Prompt: Please operate correctly to avoid damaging the battery connector. 2.3.2. Charging Insert the charger on the charging interface at the side end of the phone. After inserting the charging plug, battery strength icon stripe at the top right corner of the screen is scrolling, which means that the charging is processing; when the stripe is full of the whole icon and stop scrolling, which means that the battery charging is completed; when the charging is completed, please pull out the plug.
2.4. Security Password PIN PIN (Personal Identification Number) is used to prevent your SIM card from being used illegally. PIN is usually provided with SIM card together. If you input wrong PIN for continuous three times, please input PUK to unlock it. Please contact with network operations company for more details. PIN 2 You need to input PIN2 when entering some functions (such as call charge); if you input wrong PIN2 for continuous three times, you need to input PUK2 to unlock it.
functions that need PIN2. Please contact with your service provider to buy new card. You can’t change PUK 2. If you lose the code, please contact with your service provider. 3. Quick User Guide 3.1. Dial a Call In standby mode, press numerical keys to input phone number to dial phone number. When you finish inputting phone number, press the dial key to make a call. If you're making a long distance call, add the area code preceding the telephone number. Press left soft key to access Options. 3.2.
network support, the phone screen will show the name and telephone number of the caller; at this time, you can press Dial key to receive an incoming call. 3.4. End a Call After finishing a call, you can press End key to end a call. 3.5. Emergency Services You can directly dial an emergency service call without SIM card. Different network uses different emergency numbers, please consult your network operations company for more details. 3.6.
3.7. Dialed Calls/Missed Calls/Received Calls/Rejected Calls You can enter call log to check the relevant details of dialed calls, missed calls, received calls and rejected calls. Prompt: The record of incoming call from blacklist number will be saved in Rejected Calls. 3.8.
outgoing international calls when roaming), you can restrict the call under the corresponding conditions (need to apply to network operator for business). 3.11. Power off the Phone In the standby mode, press and hold End key to power off the phone. 3.12. T-flash Card Insert the T-Flash card into phone from the background. This will expand the Flash memory of the phone. Tap Multimedia menu, you can browse MP3, MP4, picture, video, photograph etc. 4. Function Menu 4.1.
4.1.1. Dialed calls Display the list of your recent dialed numbers. On the interface of Dialed, choose one record, then press ok key “Options” to enter the Option interface and you could go on the following operations. Details: Display the information of dial calls (Number, Date, Time, Duration, From, Style, and SIM Name) Call: Recall the number. Save: Save the number to Phone/SIM1/SIM2 Send SMS: You could send SMS to this number.
4.1.3. Missed calls Display the list of your recent missed numbers. The operation is the same as the Dialed. 4.1.4. Rejected calls Display the incoming call records in the blacklist. The operation is the same as the Dialed. 4.1.5. Delete All You could delete all the records of the Dialed, Received, Missed and Rejected. 4.1.6. Call timer Display information details of SIM1/SIM2: Last Call, Received Calls, Dialed Calls, and All Calls. Press left soft key to "Reset".
4.1.7. Call Cost Press up/down navigation key to check: Total Cost, Max Cost, Price Per Unit, and Reset Cost. Prompt: The call expense function shall be supported by the network operator. The design of the charging unit and the phone rate limit shall require you to input the PIN2 code. Please contact with your network operator to achieve the password. 4.2. Contacts This function could help you browse the name card holder, store, edit and delete the names and phone numbers in the phone and SIM card.
New: Create new name card holder records to SIM card or the mobile phone. Search: Search the record stored in the phone or the SIM cards. Write SMS: Send SMS to this record. Call: Dial this record directly or by means of IP call. Delete: Delete this record. Mark: Choose one record or all records, and cancel what you choose are also allowed. Copy: Copy the record to SIM cards or phone card. Others ――Caller ID: You can view or edit the number of this phone.
Choose one folder and press left soft key, then you can operate as follows: 1. New folder: Create a new folder. 2. Delete: Delete the folder. 3. Details: Check details of the folder, name, date, size, position and so on. 4. Edit: Re-name or copy the folder. 5. Search: Search the file in the folder. 6. Sort: To sort according to name, date, size and type. 7. Mark: Mark one or all the folders in phone memory. 8. More: View the service condition of the phone memory.
4.4. Multimedia 4.4.1. Camera The device is equipped with a webcam with high pixels. You can take photo at any time and save the photo in the device or SIM card. The photo can be used as wallpaper of your device or you can send it to your friends through Bluetooth. You can view the photo on screen and press camera key to get a picture. On the photo preview interface (screen rotate); press OK key to get the picture; ――Size: You can set the photo image size.
10S. ――Effect: The special effect can be classified into: normal, black and white, red, green, blue, yellow, negative and sepia. In camera preview interface press left soft key you can enter options menu as follows: ――Gallery: Enter into image browser list. ――Settings: ―Quality: There are three options in photo image quality: Advanced, Common and Low. The default mode will be “Common”. ―Banding: You can set as 50Hz or 60Hz. ―Shutter sound: You can set up the sound of shutter as: Activate or Off.
4.4.2. Image viewer Enter the images list interface, press left soft key, you could go on the following operations. ——Change folder: Change the images folder. ——Send: Send this file to Bluetooth ——Slide play: View this file as full screen. ——Delete: Delete this image. ——Set image as wallpaper: Set this image as wallpaper ——Rename: Rename the file ——Mark: Choose the image or all of the images. ——Details: To show the images details. ——Slide settings: To setup the slide about effect and slide delay time. 4.
――Brightness: Six levels of brightness are available. ――Contrast: Six levels of contrast are available. ――Effect: The special effect can be classified into: normal, black and white, red, green, blue, yellow, negative and sepia. In camera preview interface press left soft key you can enter options menu as follows: ――Settings: ―Banding: You can set as 50Hz or 60Hz. ―Audio: You can set as activate or off.
On the audio player interface, move cursor to the shortcut keys on the screen, you could rapidly operate the MP3 functions. Under the MP3 list interface, press left soft key, then you can do operations as follows: ――Music list: Display all the MP3 or the play list you’ve saved. ――Music mark: Mark the selected MP3 to play. ――Add: Add the selected MP3 to the list. ――Set as ring tone: Set the selected MP3 as the call ring or alarm ring of the incoming call.
Enter the video play list interface, press left soft key, you could go on the following operations. ――Play list: To show the video files. ―― Fullscreen play ―― Order play: You can set as open or close. ――Video application: You can set the video file as screensaver or power on/off animation. ――File attribute: To show the video file details. 4.4.6. FM Radio You can listen to Fm radio freely.
――Manual search: Search the broadcasting station by input frequency manually. ――Open/Close speaker: You can start up loudspeaker to make the sound louder. ――Background play: When the function is on, you can do other operations while listening to the radio. ――help Prompt: Please connect with the earphone before you listen to the radio, for the device is equal to radio antenna. When the battery of your cell is insufficient, you may not enter the Radio channel. 4.4.7.
4.5. Message 4.5.1. Write Message You could write new message by using this function. When you input the message to be sent, press left soft key to send, to insert the templates, to add contact person information and symbol, and to save, etc. ――Send: Enter the interface of input number, you can dial the phone number directly, or press left soft key to enter the name card holder and choose the number to send. ――Insert template: Enter the templates interface and you could insert the template to the message.
4.5.2. Inbox Store the SMS, and Push message you’ve received. The SMS, and Push message could be differentiated by different icons. The icons before the message list means whether this message is SMS or Push message and which is stored in SIM1, SIM2 or the phone. Choose one SMS and press left soft key, then you will do several operations, for example, reply the SMS, delete, dial and mark. Press OK key directly you can read this SMS, or Push message. ――Delete: Delete this message.
SIM1, SIM2 or the phone. Choose one SMS and press left soft key, you could send, delete, operate, lock, mark, sort, and so on. 4.5.4. Drafts Store the SMS you’ve edited. The SMS is stored in SIM1, SIM2 or the phone. 4.5.5. Sentbox Store the SMS you’ve sent successfully. The SMS is stored in SIM1, SIM2 or the phone. 4.5.6. Templates You could edit or delete the templates. 4.5.7. Voice mail server This phone supports the function of the voice mail.
choose either SIM1 or SIM2. When you receive the calls from others, they could give you a message in your voice mailbox. When you phone receives the message notice, you could listen to the messages. Under the voice mail interface you can edit and set the number of line 1, line 2, fax or data. Prompt: The realization of the voice mail requires the support of the network operator and you may firstly apply for this service.
There are seven options: SIM 1 service center, SIM2 service center, validity period, status report, save sent message, prior storage medium. ――SIM1/SIM2 MSG center: Display the SMS service center number in SIM1/SIM2. ――Massage validity period: You could set the validity period of the message for 1 hour, 6 hours, 24 hours, 72 hours, 1 week and the maximum value. Prompt: This time is related with the services of the network operator. ――Status report: May choose to start up or shut down the delivery report.
and Save” or “Send only”. Save: Save automatically your sent message. Not save: Not to save automatically your sent message. ――Preferred storage: You could choose the preferential storage position at SIM card or phone. Broadcast message ――Broadcast launch: Choose to start up/shut down the broadcasting. ――Channel settings: Set the channel to receive the area message. ――Languages: Set different languages. 4.5.10. Message capacity You could view the capacity of SMS.
4.6. Tools 4.6.1. Calendar You can use this feature to view the year, date and solar term easily. Use up/down/left/right direction key to navigator other date. ――Add new Schedule ·Subject: Enter the schedule name. ·Date: Edit the schedule date. ·Time: Edit the schedule time ·Ring tone: Fixed rings: Ring1/ Ring2/ Ring3 / More Ringtones ·Type: Remind once/ Daily/ Weekly/ Monthly/ Yearly/ No reminding. ·Deadline: Press left soft key to save and right soft key to return.
4.6.2. Alarm You can edit alarm, time, ring and repeated ring mode. In “ alarm edit” mode, you can scroll up or down direction key, when the cursor goes to the desired option, press “OK”, then you can select desired settings. The alarm clock feature sounds an alert or makes a vibration alert at a time you specify. ――Alarm1 ――Alarm2 ――Alarm3 4.6.3. Calculator The function will make your device a calculator with which you can carry out simple math calculation. Write by stylus to enter the numbers.
4.6.4. Torch Light You can turn on/off torch light or long press 0 key in standby interface. 4.6.5. Bluetooth Open/Close Bluetooth You can choose to “open” or “close” Bluetooth. Bluetooth visibility You can choose “show phone” or “hidden” Bluetooth. If the Bluetooth is hidden, others cannot search your phone.
Help You can view the operating instruction of Bluetooth. 4.6.6. STK Enter STK submenu, you can use the additional services that the network service operator provided. The device has STK function. The service is provided by network operator. If SIM card or network operator fails to provide the service, the function can not be available. Contact network service operator, if you want to have more information. 4.7. Entertainment 4.7.1. Sokoban ·New Game: You can start a new push cases game.
4.8. Profiles You could set different scene modes. ——Normal ——Silent ——Vibrate ——Indoor ——Outdoor You could active, customize, rename. Ring settings ――SIM1 call ring: You could set the ring tone of SIM1 into fixed tone or more tones. ――SIM2 call ring: You could set the ring tone of SIM2 into fixed tone or more tones. ――SIM1 msg ring: You could set the message tone when the SIM1 receives the message. ――SIM2 msg ring: You could set the message tone when the SIM2 receives the message.
――Call volume: You could set the volume when you are calling. ――Alarm & calendar ringtone: You could set the volume of the alarm clock when it rings. ――Power ring tone: You could set the volume when power on or power off. Call Alert You could set the incoming call alert for the SIM1 and SIM2 and there are five options for you to choose: ring tone, Vibrate, Silent, Vibrate then ring, Ring and vibrate.
Power ring tone You could set the tones when starting up and shutting down the phone. 4.9. Settings You can customize the settings, such as time and date, language, call settings etc. 4.9.1. Call settings Dual-SIM ――Standby mode: Only SIM1 enable/ Only SIM2 enable/ Dual SIM dual standby ――Reply by original SIM: Call/SMS Reply by original SIM ――Set SIM name: You can set any name you like as the name of SIM card slot.
-Auto Select: Press the left key and Ok, the mobile phone will search various networks. This operation will let your phone register the most suitable network. -Manual Select: Press the left soft key and Ok, the mobile phone will search various networks. You can select the suitable network from the listed networks. Call divert: When “call divert” function is started up, you can transfer the incoming call to voice inbox or other phone number according to the tasksd “ call divert” conditions.
――Divert If Unreachable: When your phone is power off or out of the service area, the incoming calls will be transferred to voice inbox or other phone number according to the setup. ――Cancel All Diverts: You can delete all settings of call divert. Call barred: All outgoing calls, incoming calls, roaming incoming calls, international outgoing calls, roaming international outgoing calls are available.
call. ――Change Password: You can consult your network operator about the call barring password. Prompt: The above-mentioned function will have to need network support. To use the function, please contact your network service provider. Call waiting: You can start up or shut down the function. When it is started up, even when you are making a call, you can also receive another income call. Hide ID: This function must be supported by network.
――50 secs warning ——Vibration when connected: Activated/Off ――Answer/Reject mode: SMS reply after reject/ any key answer ――Auto redial: Activate/ Deactivate 4.9.2. Phone settings Time & Date: You can set up the date and time on the phone as well as their display mode. Select language: You can select phone language. Shortcut settings: You can set the menu when you press right softkey to enter in standby interface. Auto Power on/off: You can set the time and repeat mode of power-on and power-off.
4.9.3. Display settings Wallpaper settings: You can set as default wallpaper image as well as more other wallpaper images. Idle display settings: ――Time & date ――Service provider Contrast: On the screen backlight interface you can set different lightness of your phone by pressing the left/right direction key.
――off Animation effect: ――Power on display ――Power off display 4.9.4. Security settings PIN:You can start up, shut down or modify PIN code. Correct PIN code shall be input when you unlock or shut down PIN code. If PIN code verification is started up, each time when you switch on your phone, you will have to input PIN code. If you input mistaken PIN codes three times in a row, SIM card will be locked. You will have to get PUK1 code to unlock it.
Lock screen by end-key Power-on password:You can start up or shut down “phone password” or revise it. When “phone password” is started up, you will have to input “password” each time when you use the phone. The default phone password is 1234. 5. Text Input The device provides several text input modes so that you can write text or input data in your “contacts”, edit “contacts” record, search English names and write SMS and to-do list.
Similarly, if the letter you want to input have the same key with the former letter, please wait until the cursor appears again, then input the new letter. For example, if you want to input “ok”, you need to press the “6” key three times continuously and get “o”, then press the key”5” twice, “ k” will appear on the screen. Press right soft key, you can delete the text you input. Number Enter “edit” mode, press “#” key you can change the input way to “ number”.
6. Care and Maintenance Maintenance of battery ·Your device is powered by a rechargeable battery. It is necessary to have the battery charged when it is going to wear out. The full performance of a new battery is achieved only when it is fully wore out. ·Unplug the charger from the electrical plug and the device when not in use. Do not leave fully a charged battery connected to a charger over a week, since overcharging may shorten its lifetime.
·Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Care of maintenance of your device The suggestions below will help you protect your warranty coverage. ·Keep the device and accessories out of the reach of small children. ·Keep the device dry. All types of liquids or moisture will corrode electronic circuits. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
RF Exposure Information: FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the body with the minimum separation distance of 1.5cm is 0.695W/kg, next to the head is 0.763W/kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules.