Installation Sheet

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
Estate
®
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T722900
T722901
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965955 (8/18)
1" MAX.
(25 mm)
431 mm
(17")
280 mm
(11")
234 mm
(9-3/16")
136 mm
(5-5/16")
213 mm
(8-3/8")
201 mm
(7-15/16")
198 mm
(7-3/4")
182 mm
(7-1/8")
98 mm
(3-7/8")
104 mm
(4-1/8")
8" TO 16"
FLEXIBLE INSTALLTION
(203 TO 406 mm)
Hex wench
(supplied)
RECESS
3
4
6
MOUNTING
SURFACE
1
2
7
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
• Install PLUG BUTTON (6).