Use and Care Guide

B33
© 2013 AS America Inc.
Revised 10/13
BERWICK
®
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T430.508 Berwick BATH/SHOWER Trim Kit
Lever Handle. FloWise
®
Showerhead. LESS Valve Body.
T430.507 Berwick SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
ROUGH VALVES:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving 3-function showerhead offers up to
40% water savings at maximum 2.0gpm/7.6L/min. flow
rate. Metal slip-on diverter spout. Available with metal
lever handle.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, and hot limit safety stop.
Cycles from “off” to “cold” to “hot”. Pressure balancing
cartridge maintains constant output temperature in
response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.
T430.508 Bath/Shower Trim Shown
PRODUCT FEATURES:
FloWise Water Saving 3-Function Showerhead: Saves
up to 40% in water usage. Max. 2.0gpm/7.6L/min. flow rate.
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system with integrated
check valves engineered to eliminate cross flow. Avoids failure
due to mineral deposits - ideal for use in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. 2 piece design allows valve to
be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving 3-function showerhead with Max. 2.0gpm/7.6L/min. flow rate. Shall feature a cast brass
body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with
pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot
limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard
Model # T430.50_.____.
Valve body will accept a variety of decorative
Bath/Shower Trims
Colony
®
Hampton
®
Town Square
®
Tropic
®
Times Square
™
Dazzle
®
Serin
®
H
O
F
F
Berwick
®
O
f
f
H
ot
Ho
t
C
o
l
d
H
C
O
F
F
C
H