Installation Guide

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
Serin
™
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T064900
T064901
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965946 (8/18)
1" MAX.
(25 mm)
MOUNTING
SURFACE
3-1/4" D.
(82mm) D.
2" D.
(52mm) D.
9-1/2"
(240mm)
6-3/4"
(170mm)
9-3/4"
(247mm)
2-3/4"
(71mm)
6-1/2" to 12"
(165mm to 305mm)
2-1/16" D.
(52mm) D.
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
3
4
6
RECESS
MOUNTING
SURFACE
1
5
2
7
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
• Install PLUG BUTTON (6).