Specification Sheet

B41
© 2015 AS America Inc.
SERIN
®
PRESSURE BALANCE BATH/SHOWER FITTING
MODEL NUMBER:
TRIM KITS:
T064.502 Serin BATH/SHOWER Trim Kit
Metal Lever Handle. LESS Valve Body.
T064.501 Serin SHOWER ONLY Trim Kit
Metal Lever Handle. LESS Valve Body.
T064.500 Serin VALVE ONLY Trim Kit
Metal Lever Handle. LESS Valve Body.
For use with R110 Series Pressure Balance Valves.
See reverse side for available Rough Valves.
T064.502 Bath/Shower Trim Shown
BOTTOM OF TUB
4-7/8" REF.
(124 mm)
1/2" NPT
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
1/2"
COPPER
7-1/4"
(184 mm)
OPTIONAL TO
FINISHED
FLOOR USUALLY
BETWEEN 65''
AND 80''
(1651 AND 2032 mm)
TOP OF TUB RIM
FINISHED WALL
5-5/8" REF.
(143 mm)
8-1/8" REF.
(206 mm)
1-1/2" REF.
(38 mm)
74" (1880 mm)
FOR HEAD
CLEARANCE
18"
(457 mm)
OPTIONAL
4" REF.
(102 mm)
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Shower
Spout
10080604020
1/2"
NPT
1-1/4"
(32 mm)
DIA. HOLE
4" REF.
(102 mm)
4-7/8" REF.
(124 mm)
GENERAL DESCRIPTION:
SHOWERHEAD
3-Function Modern Showerhead at maximum 2.5 gpm/9.5 L/min.
flow rate.
WALL TUB SPOUT
Metal slip-on diverter spout.
WALL VALVE TRIM
Available with metal lever handle.
Metal wall escutcheon.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature 3 function showerhead with Max. 2.5 gpm/9.5 L/min. flow rate. Fitting shall be:
American Standard - Trim Kit Model #
T064.50_.___ and Valve Body Model # R11_.
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ANSI A 117.1
ASSE 1016
ASME A112.18.1
CSA B 125.1
*To modify a product, add suffix after the
4
th
digit (ex. T064ITP502.002)
IPS Spout
Factory
Installed
Decal Ring
(Red/Blue)
___IPT
___WD
Modifications
Parts
Suffix*
C
H
O
F
F
O
N
T064.502 Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T064.501 Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
Polished
Chrome
002
PVD
Satin
Nickel
295
TRIM KITS *
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
T064.500 Valve Trim Only . Metal Lever Handle. LESS Valve Body.
R111
R111SS
R110
R110SS
R115
R115SS
R117
R117SS
R118
R118SS
R119
R119SS
Rough Valve Body less trim. Universal inlets/outlets.
Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Direct sweat inlets/outlets.
Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).
Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)
with Screwdriver Stops.
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).
Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)
with Screwdriver Stops.
Rough Valve Body less trim. CPVC inlets/universal outlets.
Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.
Product
Number
Description
ROUGH VALVE BODIES
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Revised 5/15