Installation Guide

ManualsBrandsAmerican Standard ManualsFaucet ValvesFlash 1/2 in. Copper 2-Handle 3-Hole Roman Tub Filler Rough-In Valve for Hand Shower

- 1 -

M965908 (7/18)

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 140 years.

To ensure that your installation proceeds smoothly-please read

these instructions carefully before you begin.

Flash

™

Deck Mount

Tub Systems

Rough Valve Kit

INSTALLATION

INSTRUCTIONS

R900

R910

ROUGHING-IN

FINISHED DECK VARIABILITY

ACCOMMODATES DECKING

MATERIAL (TILE, MARBLE,

CORIAN

...) TO 1" THICK

2. FINISHED DECK

3. FITTING MOUNTING SURFACE

4. ACRYLIC BATHS

DECK MOUNTING HOLES

ADJUSTABILITY, TO 1-1/2" THICK

1. DECK THICKNESS

TOTAL DECK THICKNESS

UP TO 2-1/2"

ADJUSTABILITY, TO 1-1/2" THICK

FINISHED

DECK

FITTING

MOUNTING

SURFACE

ACRYLIC

BATH

MOUNTING

1/2" COPPER

INLET SUPPLIES

1-3/8" D

MAX.

1-3/8" D MAX.

1-3/8" D

(2) 1-3/8" D

HOLES

(3) 1-3/8" D

HOLES

8" to 12" for Copper tubes

12" for Flex hoses

7-1/8"

1-1/2" D

8" to 12" for Copper tubes

12" for Flex hoses

MOUNT SPOUT SHANK

SPOUT SHANK LOCK RING FLUSH WITH

TOP OF THREADS ON SPOUT SHANK

SPOUT SHANK

LOCK RING

SPOUT SHANK

FRICTION WASHER

SPOUT SHANK

MOUNTING

NUT

1-1/2" MAX.

MOUNTING

SURFACE

PLUG

Certied to comply with ANSI A112.18.1

U.S. Patent No. D403,750

• Drill holes in mounting deck as shown on STEP 1. The maximum allowable deck thickness is 1-1/2".

• Unthread PLUG from SPOUT SHANK.

• Insert the SPOUT SHANK through the mounting deck from below. Assemble the SPOUT SHANK LOCK RING so it

is ush with the top of the threads on the SHANK.

• Tighten SPOUT SHANK MOUNTING NUT securely.

• Thread PLUG into SPOUT SHANK.

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS R900 R910 Flash™ Deck Mount Tub Systems Rough Valve Kit Thank you for selecting American-Standard... the benchmark of fine quality for over 140 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1 U.S. Patent No. D403,750 1 ROUGHING-IN 2 FINISHED DECK 1. DECK THICKNESS TOTAL DECK THICKNESS UP TO 2-1/2" 1-3/8" D MAX. ACRYLIC BATH MOUNTING 1-3/8" D MAX. 4 2.
PAGE 2
3 MOUNT SIDE VALVE BODIES NOTE: For unfinished surface use larger VALVE LOCK RING. NOTE: For finished surface use small VALVE LOCK RING. Larger VALVE LOCK RING can be used on finished surface for Colony Pro, Quentin, Estate, Fitzgerald, and Studio S. • Insert the HOT and COLD VALVE BODIES through the mounting deck from below. The HOT VALVE BODY is marked with a red label. Assemble the VALVE LOCK RINGS so they are flush with the top of the VALVE BODIES. • Tighten the VALVE BODY mounting nuts securely.
PAGE 3
4 MAKING CONNECTIONS 3 • Connect the water supply lines to the VALVE BODY. For R910 installation, install HAND SHOWER HOSE (1) to the TEE. • Insert HAND SHOWER HOSE (1) through HAND SHOWER SHANK (2) and thread HAND SHOWER HOSE (1) into TEE (4). 2 • Place HOSE PLUG (3) into HAND SHOWER SHANK (2). 4 1 WATER SUPPLY CONNECTIONS WATER SUPPLY CONNECTIONS 5 SERVICE — TO CHANGE THE DIRECTION OF HANDLE ROTATION • Turn off the water supplies. • Turn HANDLE to the off position and remove HANDLE.
PAGE 4
Flash™ Deck Mount Tub Systems Rough Valve Kit M906666-0070A LARGE FIXATION NUT MODEL NUMBERS R900 / R910 918555-0070A SCREW M918464-0070A SPINDLE A911546-0070A VALVE LOCK NUT M906666-0070A LARGE FIXATION NUT M906699-0070A SMALL FIXATION NUT 994053-0070A VALVE CARTRIDGE M970510-0070A HAND SHOWER HOLDER (R910) M962278-0070A VALVE MOUNTING KIT M970512-0070A VALVE PIPING KIT (R910) M970511-0070A VALVE PIPING PLUG (R900) A952849-0070A CHECK VALVE 051343-0070A HOSE KIT (R910) HOT LINE FOR HELP For t