Product Specs

ManualsBrandsAmerican Standard ManualsBathroom Remodel & Bathroom FixturesRavenna Vitreous China U-Shaped Pedestal Bathroom Sink with Overflow

BS-23

RAVENNA™

PEDESTAL SINK

VITREOUS CHINA

RAVENNA PEDESTAL SINK

• Vitreous china

• Contemporary design

• Rear overflow

• Faucet ledge with generous shelf area

• Supplied with mounting kit

• Optional integral mounted towel bar

(ordered separately, installed by customer)

• Design matched to Ravenna Toilets

• Shown with 2000.101 Ceramix single lever

faucet (not included)

❏ 0268.800 Faucet holes on 8" (203mm) centers

❏ 0268.400 Faucet holes on 4” (102mm) centers

❏ 0268.100 Center faucet hole only

Nominal Dimensions:

24-1/4" x 19-7/8" x 34-1/4"

(616 x 505 x 870mm)

Separate Components:

❏ 0268.008 Pedestal top-8" (203mm) centers

❏ 0268.004 Pedestal top-4” (102mm) centers

❏ 0268.001 Pedestal top-Center hole only

❏ 0041.000 Pedestal only

Bowl sizes: 19-3/8” (492mm) wide,

11-7/8 (302mm) front to back,

6” (152mm) deep

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures

• CAN/CSA B45 Series

Recommended Component

❏ Integral Towel Bar: 3520.000 (Specify

002 Chrome or 295 Satin)

To Be Specified

❏ Color:

❏ Faucet*:

❏ Faucet Finish:

❏ Supplies:

❏ 1-1/4" Trap:

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE SUGGESTED.

▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.

■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKEN FROM

FIXTURE.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances

established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use

of superseded or voided pages.

* See faucet section for additional models available

(508mm)

20-1/4 (514mm)

3-1/4

(83mm)

(102mm)

▼

(203mm)

FINISHED WALL

5-1/4 (133mm)

PEDESTAL ANCHORING

SCREW HOLES 5/16 (8mm) DIA.

PEDESTAL

TO WALL

3/4" (19mm) DIA.

HOLES FOR

ANCHOR BOLTS

(864mm)

REF.

OPEN

FLOOR

24-1/2

(622mm)

■

9-3/8

(238mm)

REF.

(203mm)

OPTIONAL

TOWEL BAR

■

(178mm)

20-1/2

(521mm)

(584 mm)

1-1/4 O.D.

WASTE

1-1/4 O.D.

TAILPIECE

SUPPLIES

AS REQ'D

FINISHED

FLOOR

8 (203mm)

6-1/2 (165mm)

DRAIN

CHASE

PEDESTAL

SIDE SECTION

1/02