User guide

ManualsBrandsAmerican Standard ManualsHousehold AppliancesACONT900AC43UA

Nexia Home Intelligence

Customer Service:

(877) 288-7707

For HVAC related

issues, contact your

servicing dealer

Î NOTE: A 24 Volt common and hot wire MUST be

connected to the ACONT624A for operation.

Touchscreen

Comfort Control

Model ACONT624AS42DA

User Guide

12-5058-03

Contents

User Guide

Features .......................................................................................................................................................................... 2

Operation .........................................................................................................................................................................3

User Settings ...................................................................................................................................................................4

Scheduling .......................................................................................................................................................................5

Enrolling into “Z-Wave” Network (Nexia

Home Intelligence) .........................................................................................8

Un-enroll comfort control from existing “Z-Wave” Network (Nexia

Home Intelligence) .................................................9

Firmware Upgrades .......................................................................................................................................................10

About ............................................................................................................................................................................. 11

Clean Screen ................................................................................................................................................................ 11

Limited Warranty ............................................................................................................................................................12

FCC/IC Notice ................................................................................................................................................................ 14

Summary of content (14 pages)

PAGE 1
2-5058-03 Touchscreen Comfort Control Model ACONT624AS42DA User Guide Nexia Home Intelligence Customer Service: (877) 288-7707 For HVAC related issues, contact your servicing dealer ÎÎ NOTE: A 24 Volt common and hot wire MUST be connected to the ACONT624A for operation. Contents User Guide Features ...........................................................................................................................................................................2 Operation.......................
PAGE 2
User Guide Features ACONT624AS42DA Features • • • • • • • • • • • • • • • • 2 24v, Z-Wave comfort control Remote access via smart phone, tablet, or P.C. (requires SK101 and a NexiaTM Home Intelligence account). Interactive 4.
PAGE 3
User Guide Operation The model ACONT624AS42DAA Comfort Control provides typical operation of a forced air heating and cooling HVAC system. The ACONT624 comfort control also features a Z-Wave™ module for remote control. : PM F Hold Menu Cooling Cool Sched Mode Auto Fan Normally, the Comfort Control displays the Home Screen as shown above. Item Description Notes Clock Display The current time is displayed in the upper left corner of the main screen.
PAGE 4
User Guide User Settings User Settings allow the user to customize various settings on the 624 control. To access User Settings simply press the Menu button once and “User Settings” will be displayed. To enter the User Settings menu, press the Select button, then use the Next button to navigate through the options below. The default setting will be shown in brackets. After each selection press the Done button to save changes.
PAGE 5
User Guide User Settings Continued User Settings allow the user to customize various settings on the 624 control. To access User Settings simply press the Menu button once and “User Settings” will be displayed. To enter the User Settings menu, press the Select button, then use the Next button to navigate through the options below. The default setting will be shown in brackets. After each selection press the Done button to save changes.
PAGE 6
User Guide Scheduling Edit Schedule (Local) Press the following button sequence to edit or create an entirely new daily schedule. Edit Schedule Button Press Menu Displayed What Needs to Be Done? Press Menu from Home screen USER SETTINGS Press Next SCHEDULE Press Select EDIT SCHEDULE Press Select SELECT DAY Continue to press “Next” until the day of week to edit is displayed. Press Select SET TIME Set the start time for each of four periods for the day displayed.
PAGE 7
User Guide Scheduling Copying Schedules Press the following button sequence to access “Copying Schedules” from the Home Screen.
PAGE 8
User Guide Enroll Comfort Control into existing Z-Wave Network (NexiaTM Home Intelligence) 1 Prepare the bridge for enrollment. (Bridge kit SK101 purchased separately) ÎÎ Note: If the bridge is already installed, follow the instructions as they are written in the following steps. If the bridge is not installed, follow the instructions shipped with the bridge kit. a. Unplug Ethernet and power cables from bridge. b. Install a quality 9 volt battery. c. Verify that blue light is blinking.
PAGE 9
User Guide Enroll Comfort Control into existing Z-Wave Network (NexiaTM Home Intelligence) Continued 4 Establish Online Connection to the Comfort Control. Nexia Home Intelligence account must be active before continuing. See nexiahome.com for more information. a. b. c. d. Remove the battery from the bridge. Plug the Ethernet and power cord back into the bridge. Log into your account at www.mynexia.com Click the Climate tab and follow the on screen instructions.
PAGE 10
User Guide Firmware Upgrades 1 Firmware Upgrades allow the user to update the 624 control. Upgrades may take up to 45 minutes. The system operation will be maintained during the upgrade process. To access the Firmware Upgrades navigate to mynexia.com and look for the Edit Home screen button. The Edit Home screen button is located about mid way own the Nexia Home Page. a. 10 On the Edit Home, Firrmware Updates page, the 624 will appear.
PAGE 11
User Guide b. When the user selects the “Update Firmware” button an “Update Firmware” dialog will appear. The dialog will first connect to the device and then it will display the firmware update progress. c. After the firmware has been downloaded it is then applied to the ACONT624. d. The portal retrieves version information from the ACONT624. e.
PAGE 12
Warranty Base Limited Warranty Subject to the terms and conditions of this limited warranty, Trane U.S., Inc. (“Company’) extends a limited warranty against manufacturing defects for the product(s) identified in Tables 1, 1A, 1B attached hereto (“Products’) that are installed in a residential/multi-family application (personal, family or household purposes) under normal use and maintenance in the United States and Canada. This limited warranty applies to Products manufactured on or after August 1, 2011.
PAGE 13
Warranty ADDITIONAL TERMS: THIS LIMITED WARRANTY AND LIABILITY SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES AND LIABILITIES, WHETHER IN CONTRACT OR IN NEGLIGENCE, EXPRESS OR IMPLIED, IN LAW OR IN FACT. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE APPLICABLE PRODUCT WARRANTY. COMPANY DOES NOT AUTHORIZE ANY PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH THE PRODUCTS.
PAGE 14
FCC Notice FCC ID WIBTZW012 INFORMATION TO USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to Part 15 of the FCC Rules.