Installation Guide

770037-100 Rev. A
TROPIC MIRROR 9212101
TROPIC CONSOLE CABINET 9212300
TROPIC DEMI-APOTHECARY CABINET 9212200
Recommended Tools & Materials
Roughing-in Dimensions
Phillips Screwdriver Regular Screwdriver
Drill
10'
Tape Measure
Level
Hammer
TROPIC MIRROR 9212101
INSTALLATION
Roughing-in Dimensions
TROPIC CONSOLE CABINET 9212300
INSTALLATION
Roughing-in Dimensions
FRONT VIEW
SIDE VIEW
48"
(1219mm)
12"
(305mm)
36"
(914mm)
6"
(152mm)
17"
(419mm)
21"
(521mm)
21"
(521mm)
FRONT VIEW
SIDE VIEW
17
(425mm)
15
(381mm)
42
(1067mm)
6
(152mm)
ADJUSTABLE
LEVELLERS
ADJUSTABLE
SHELF
15
(381mm)
17
(419mm)
DOOR OPENS
TO ACCESS
STORAGE
ADJUSTABLE
SHELF
DOOR OPENS
TO ACCESS
STORAGE
ADJUSTABLE
SHELF
22"
(559mm)
31"
(788mm)
1"
(25mm)
MEASURE
“D”
MEASURE
“H”
FRONT VIEW
SIDE VIEW BACK VIEW
Mirror
Mounting Hardware
Location (may not be
exactly as shown)
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help
ensure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review
the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme
changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing
furniture directly under windows.
- 1 -
ASSEMBLY & INSTALLATION
INSTRUCTIONS
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2009
Move the Demi-Apothecary into desired location and level with the
adjustable levellers on the bottom of the feet. The levellers can be
adjusted outward up to 1" but it is recommended not to exceed 1/2"
if possible.
Ensure adjustable shelf is placed securely onto shelf clips inserted
into the side panels of the cabinet.
Move the Console Cabinet into desired
location and level with the adjustable levellers
on the bottom of the feet. The levellers can
be adjusted outward up to 1" but it is
recommended not to exceed 1/2" if possible.
Ensure adjustable shelf is placed securely
onto shelf clips inserted into the side panels
of the cabinet.
TROPIC DEMI-APOTHECARY CABINET 9212200
INSTALLATION
NOTE: Where possible, try to affix to a stud or provide adequate wall support for the size and
weight of the mirror.
Measure distance “D” between Wall Mounting hardware, and distance “H” from base of Mirror.
Pre-drill holes in wall for Plastic Anchors (use when no stud is available) to the required “D”
measurement and desired height from the floor (preferred height of bottom of Mirror from floor
+ “H” for a total height).
Insert Plastic Anchors provided into the pre-drilled holes and thread the screw hardware into
the Plastic Anchor using a proper screwdriver. Allow the head to protrude from the Plastic
Anchor adequate to hold the mounting hardware securely in place.
Mount the Mirror to the wall by fitting the mounting hardware onto the protruding screw head.