Use and Care Guide

I37
© 2010 AS America Inc.
TROPIC
20" WALL HUNG WASHSTAND
WOOD
Revised 2/10
TROPIC 20" WALL HUNG WASHSTAND
9212.020 Tropic Wall Hung Washstand
• Traditional style vanity with Asian air
• Constructed of poplar solids and birch veneers
• Matching Rattan door pulls included
Distressed Nutmeg nish (Sound knots and
slight surface cracks are true personality
characteristics of this design)
Nominal Dimensions:
20" x 18-5/16" (508 x 464mm)
23-3/8" height (594mm)
9212.400 Stand For Tropic Wall Hung
• Optional for oor-mounting washstand
Nominal Dimensions:
20" x 18-5/16" (508 x 464mm)
34-3/8" height (873mm) from oor to top of washstand
Meets or Exceeds the Following Specications:
• ASTM E133-2002
1-1/4"
O.D.
WASTE
23-3/8"
(595mm)
20"
(508mm)
*16"
(406mm)
*18"
(457mm)
18"
(460mm)
TROPIC PETITE
PEDESTAL SINK
FINISHED FLOOR
FINISHED
WALL
SUPPLIES
AS REQUIRED
11"
(280mm)
8"
(203mm)
34-3/8"
(874mm)
36"
(920mm)
Nutmeg
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.
ANCHOR SCREWS FOR LAVATORY AND PEDESTAL NOT INCLUDED.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
To Be Specied (Required):
0403.004 Tropic vitreous china top - 4" faucet holes
(White - 020)
or
0403.008 Tropic vitreous china top - 8" faucet holes
(White - 020)
SEE REVERSE SIDE FOR ADDITIONAL
ROUGHING-IN DIMENSIONS

Summary of content (2 pages)