Installation Guide

Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2011
- 1 -
770012-100 Rev.C
ASSEMBLY & INSTALLATION
INSTRUCTIONS
PORTSMOUTH MIRROR 9210.101
PORTSMOUTH STORAGE STOOL 9210.300
PORTSMOUTH DEMI-APOTHECARY 9210.200
BACK VIEWFRONT VIEW
SIDE VIEW
PORTMOUTH MIRROR 9210.101
INSTALLATION
PORTMOUTH DEMI-APOTHECARY 9210.200
INSTALLATION
Roughing-in Dimensions
Roughing-in Dimensions
Roughing-in Dimensions
FRONT VIEW
SIDE VIEWFRONT VIEW
Mounting Ring
Hardware for
Mirror
To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme
changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid
placing furniture directly under windows.
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To
help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
Measure “D”
1-3/4"
(44mm)
1-1/4"
(32mm)
4-3/4"
(120mm)
4-1/4"
(108mm)
4-3/4"
(120mm)
34-3/8"
(873mm)
22-1/4"
(565mm)
44-1/2"
(1124mm)
25"
(635mm)
24"
(610mm)
18"
(660mm)
37-1/2"
(953mm)
16-1/2"
(419mm)
15-3/4"
(400mm)
21-1/4"
(540mm)
10-1/2"
(267mm)
Mirror
PORTMOUTH STORAGE STOOL 9210.300
INSTALLATION
Lid Stay
Hardware
Adjustable
Levellers
21-1/2"
(546mm)
Storage
Drawer
Door opens
to access
Storage
Move the Demi-Apothecary into desired location and
level with the adjustable glides on the bottom of the
feet. The glides can be adjusted outward up to 1" but it
is recommended not to exceed 1/2" if possible.
Ensure glass shelf is inserted securely into side
support slots of cabinet.
Move the Storage Stool into desired location.
Lid opens to access storage.
Lid stay hardware ensures that lid is secured
in position when open and prevents lid from
abruptly shutting closed.
NOTE: Where possible, try to affix to a stud or provide adequate wall
support for the size and weight of the mirror.
Measure distance “D” between Key Hole Slots.
Pre-drill holes in wall for Plastic Anchors (use when no stud is available)
to the required “D” measurement and desired height from the floor.
Insert Plastic Anchors provided into the pre-drilled holes and thread the
screw hardware into the Plastic Anchor using a proper screwdriver.
Allow the head to protrude from the Plastic Anchor adequate to fit into
the Key Hole Slots at back of Mirror.
Stool Seat lifts open
to access storage