INSTALLATION & USER'S MANUAL Advanced Clean SpaLet™ Side Panel Remote Panel Thank you for purchasing this product. After reading this manual, please keep it in a place where you can refer to it easily. BE SURE TO FOLLOW THE SAFETY PRECAUTIONS. Failure to follow the safety precautions may result in serious accidents in some circumstances. Each of these items are extremely important for safety, and should be strictly observed.
INSTALLATION TABLE OF CONTENTS 1. Important Safeguards............................................................ 3 2. Product Description.............................................................. 5 3. Installing This Product.......................................................... 6 Installation Requirements.....................................................................6 Contents...............................................................................................................
1. IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, the basic safety precautions should always be observed. READ ALL THE INSTRUCTIONS BEFORE USING THIS PRODUCT The following safety terms are used in this manual to warn against different hazardous situations: DANGER– To reduce the risk of electrocution: 1. Do not place or store product where it can fall or be pulled into a tub or sink. 2. Do not place in or drop into water or other liquid. 3.
6. Never block the air openings of the product. If lint or hair, etc. is stuck in the air openings, remove it immediately. 7. Never use while sleeping or feeling drowsy. 8. Never drop or insert any object into any opening or hose. 9. Connect this product to a properly grounded outlet only. See Grounding Instructions. 10. This product should only be connected to a potable water supply line. Failure to do so will cause problems in the operation. 11. Do not pull out or insert the power plug with wet hands. 12.
2. Product Description This product incorporates a set of features to improve personal toilet hygiene and comfort. These features include rear cleansing, front cleansing and a seat heater as well as the required controls for these features. This product includes a seat unit (with heated toilet seat, toilet seat lid, warm water tank, and power cord), hardware for installing the seat unit on a toilet and connecting it to the water supply and this installation and user's manual.
3. Installing This Product Installation Requirements Before installing this product, ensure that each of the following installation requirements are met. Contents Remove the parts from the box and make sure all the parts in the parts list (below) are present. Inspect the parts carefully to make sure they are in good condition. If any part is damaged or missing, do not install this product. Contact a customer service representative for the part(s) you need.
GROUNDING INSTRUCTIONS This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. DANGER– Improper use of the grounding plug can result in a risk of electric shock.
1. Measure the size of the toilet. 5-1/8" to 8-1/2" (130 to 215 mm) Depending on the size of the toilet, it may not be possible to mount this product on it. Make sure the toilet's dimensions are as shown in the figure on the right. 17-5/16"-19-5/8" (440-500 mm) 2.
Illustrated Parts Breakdown Overview Lid Bumper Toilet Tank Lid Power Plug Seat Sensor (built-in) Nozzle Shutter Seat T-Junction Nozzle (posterior cleansing) Water Hose (with T-Junction) Bowl Water Valve Control Panel Nozzle (feminine cleansing) Strainer Strainer * The strainer removes impurities and debris from the tap water.
Operating Panel Remote SPRAY STRENGTH NOZZLE POSITION Adjusts Feminine and Posterior spray strength There are 5 modes for nozzle position adjustment STOP CLEANSING BIDET Stops cleansing functions Use for Posterior Cleansing. Use for Feminine Cleansing.
Installation 1. Required tools Have the following tools for installing this product: adjustable end wrench, Phillips head screwdriver, flat-blade screwdriver. 2. Install the junction fitting 1) Close the toilet water shutoff valve fully. 2) Flush the toilet and empty all the water from the tank. Tank Water Supply Hose Bowl Cock Side Box Nut Water Shutoff Valve 3) Place a wash bowl or other container underneath the tank water supply hose. Then loosen the box nut on the tank inlet side and remove it.
3. Installation of water supply hose to the bidet 1) R emove the protective cover from the end of the water supply hose, and pull out the cap from the water supply connection socket. Installation Figure Water supply joint Plastic Clip 2) C onnect the water supply hose for the bidet to the water supply connection socket.
4. Installation of the bidet (1) Remove the existing seat. Installation Figure Body mounting bolt 1) R emove the nuts from the seat mounting bolts, the slip washers, and rounded packing. Bracket 2) R aise the seat and remove it by lifting the seat mounting bolts. Mounting plate Seat mounting bolts Bushing Existing seat Seat mounting hole E-bidet 1) Insert the bushings into the seat mounting holes. Slip washer Loosen (2) Install the slide plate onto the seat.
5. Install the remote control unit * For Remote Version Only (1) Open the back cover of the remote control unit and insert the 2 size AA batteries. CAUTION • Insert each battery so its positive pole touches a positive connector in the battery compartment and its negative pole touches a negative connector. (2) Position the bracket on the wall in the location you chose for the remote control unit. Mark the location of the mounting holes on the wall.
If mounted either in plywood paneling 0.20 in. (5 mm) or less in thickness or in gypsum board: Plywood paneling : 0.24 in. (6 mm)-dia. Gypsum board : 0.20 in. (5 mm)-dia. 1) In plywood paneling, drill holes with a diameter of 0.24 in. (6 mm); in gypsum board, drill holes with a diameter of 0.20 in. (5 mm): Plastic Anchor 2) Using a hammer, gently drive the plastic anchors into the holes. 3) Fasten the bracket securely to the anchors using mounting screws.
Operational Check Operational Check Follow the procedure below after the installation work has been completed. 1. Insert the power plug into the outlet. Confirm that the LED on the seat unit is lit. Power plug Side Panel Version Remote Control Version 2.Check the Feminine and Posterior cleansing spray. (1) Check the cleansing operation. 1) With your forearm resting on the toilet seat, press the cleansing button. The shower automatically stops two minutes after the switch is turned on.
OPERATIONAL MANUAL TABLE OF CONTENTS Additional Important Information.....................................................................................18 Product Functions..................................................................................19 Side Panel / Remote Control...........................................................................................19 Preparations Before Use.................................................................................................
Additional Important Information • The capacity of the warm water tank is 0.88 L. Water temperature gradually drops when rear cleansing or front cleansing is used. If the water drops below a comfortable temperature, press the stop button and wait about 3 minutes for the water to reheat. • The water temperature range is preset to the following temperatures: Low: Approx. 90 °F (32 °C), Medium: Approx. 93 °F (34 °C), High: Approx. 97 °F (36 °C).
Product Functions Side Panel Remote STOP Power On/Off Stop function STOP POWER Stop function Power On/Off CLEANSING For posterior cleansing only. Press twice for oscillating function. BIDET For feminine cleansing. Press twice for oscillating function. Press twice for super oscillating function. SPRAY STRENGTH Adjusts spray strength for cleansing and bidet settings. NOZZLE POSITION Nozzle position adjustment for optimal cleansing.
Preparations Before Use Performing the following operations before using the bidet allows you to use the toilet comfortably. STOP (Turning the power on/off) Press the STOP button to turn the power ON or OFF. * If the power is ON, the power LED on the indicator panel will light up. be on. Side Panel Water Temp. Seat Temp. Adjust the temperature of the bidet using the Water Temp. switch. Adjust the temperature of the toilet seat using the Seat Temp. switch.
How to Use the Basic Functions Cleansing Bidet Water is sprayed from the feminine cleansing nozzle. Water is sprayed from the posterior cleansing nozzle. 1 1 Press the Cleansing button. Press the Bidet button. Side Panel 3 2 Press the STOP button to stop the spraying. * An automatic self-stop function is included which stops both rear and front cleansing automatically after 2 minutes. Press the [+] or [-] Spray Strength button to adjust the shower strength.
Massage Cleansing Water pressure alternates between high and low during rear cleansing, providing a massaging effect. Side Panel 1 Press the Massage button during posterior cleansing. 2 To stop the massage spray, press the Massage button again.
Deodorizing 1 To disable the deodorizer Deodorizing starts when a person sits on the toilet seat. * This product is equipped with a deodorizer cartridge which absorbs odors from the toilet. 2 Deodorizing automatically stops after you stand up. Press the STOP and Bidet buttons simultaneously for 2 seconds. * When the deodorizer feature is disabled, the power LED on the seat unit flashes momentarily. At this point, the deodorizer will no longer activate when a user is detected.
How to Use the Convenient Functions ECO button One-Touch Power Save: Reduces power consumption by turning off the water and seat heater for 8 hours. The power settings are automatically restored after 8 hours. One-touch power save (8 hours) 1 Press the ECO button. For side panel, the power save ECO LED lights up. For remote control, the power save ECO LED lights up on the seat next to the power LED.
High Efficiency Power Savings When the product is not in use, it lowers the temperature of warm water and seat to control power consumption until the product is put back into use. Press [Water Temp] and [Power Saving] button, and hold for 2 seconds or more. Seat Temperature Warm Water Power saving indicator flashs once activated.
Other convenient functions (For side panel version of bidet seat only) Seat Temp. expand from 3 to 5 modes 3 modes Indicator Press Seat Temp. and Nozzle position UP (arrow up) for 2 seconds to expand the seat temperature adjustments from 3 to 5 modes. • After setting, all indicators will flash once. • The Low and Mid indicator will both light up when seat temperature is in the middle of Low and Mid.
If freezing weather or long term absence is anticipated, drain the water. (1) Turn the water shutoff valve clockwise to shut off the water supply to the tank. (For draining in cold areas, operate the indoor drain plug.) (2) Press the flush lever on the tank to drain water from the tank. (3) Remove the power plug from the outlet. (4) Drain the water from the warm water tank and the water supply hose connected to the seat unit.
Maintaining This Product Cleaning the Seat Unit Cleaning the Nozzles a) B idet Seat must be powered ON to clean nozzle tip. Periodically, wipe off the seat unit with a soft cloth dampened with water. b) For side panel type, under non-seated situation to clean nozzles manually, press "Seat Temp" and "Water Temp" buttons at the same time for over 2 seconds. For remote type, under non-seated situation to clean nozzles manually, press "Nozzle Cleaning" button for over 2 seconds.
Cleaning & Maintenance of the Deodorizing Screen Cleaning the Deodorizing Screen 1. D isconnect the power plug from the outlet and shut off the water supply at the valve. 5. Install the strainer back into the base plate of the toilet seat. 2. R emove the seat from the toilet. 3. P ull the screen from under the left hand side of the seat. 4. R emove the dirt from the screen using a toothbrush or other small brush. 6. Install the seat back onto the bowl. 7.
Cleaning the Inlet Strainer If the water pressure weakens over time, clean the strainer using the following procedure. Cleaning the Inlet Strainer 1. Close the water shutoff valve to cut off the water supply. NOTE: Since the water shutoff valve is adjusted beforehand, keep track of the turns so that you can return to the original position. 2. Turn the strainer located on the bottom left of the seat unit using a screwdriver or similar tool and remove it. 3.
Cleaning Areas Covered by the Toilet Seat Lid & Unit CAUTION When cleaning this product, be sure to unplug the power plug from the wall outlet. Removing the toilet seat lid 1. Move the pin hole on the right side of the toilet seat lid to the outside and remove it from the pin. 2. Hold the toilet seat up on the right side and slide it to the left, removing it from the pin on the left side. If you try to pull hard to remove the toilet seat CAUTION Toilet seat lid Pin lid, it could crack or break.
Change Batteries for the Remote Control When batteries are about to run out, the battery indicator LED display begins to flash. The indicator only flashes when batteries are low. The batteries included were used in testing of product and may not have the normal lifecycle. The lighting in the room area may make it difficult to see the low battery LED flashing. Change new batteries for the remote control; as follows.
Troubleshooting You can easily correct some of the problems with this product. Before requesting repairs, please check the following items. If you are unable to correct the problem using the troubleshooting procedures shown below, please contact your local customer service representative. All functions Symptom The system will not operate at all. Remedy Cause Electricity is not being supplied to the power outlet. Check for a power failure or tripped breaker, etc. The power switch is off.
Heated Toilet Seat Symptom The toilet seat is not warm. Remedy Cause Seat temperature is not set to an appropriate level. Adjust the seat temperature to the appropriate level. ECO mode is activated. Disable power save. Others Symptom The seat unit becomes loose Remedy Cause The seat unit is not locked. Push the seat unit until it locks in position. WARNING: A damaged or overheated power plug or cord, or a loose or overheated wall outlet, could cause injury or damage the product.
Specifications Product Type Remote Control Rated Voltage AC120V 60Hz Rated Power 300W±10% Inlet Water Pressur Range Min. 9 psi (0.06MPa) Flow pressure Max. 108 psi (0.75MPa) Hydrostatic pressure Ambient Temperature Range Product Dimension 32°F~104°F (0°C~40°C L 21-1/16" x W 17-3/16" x H 6-7/8" (L 536mm*W 436mm*H 173mm) Water Inlet Type Warm water storage tank Rear Cleansing Volume 0.42~1.27 pint/min (0.25~0.6L/min) (6 adjustment levels) water pressure 29psi (0.2 Mpa) 0.42~1.27 pint/min (0.
AS AMERICA, INC. ONE YEAR LIMITED WARRANTY If inspection of this AS America, Inc. (“American Standard”) plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model. This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim, proof of purchase will be required—save sales receipt.
