Installation Guide

ManualsBrandsAmerican Standard ManualsBathFluent Single Hole Single-Handle Bathroom Faucet in Oil Rubbed Bronze

FLUENT

SINGLE CONTROL LAVATORY FAUCET

MODEL NUMBER:

❏ 7186.101 Single Control Lavatory

Metal Speed Connect

pop-up drain. Metal lever handle.

AVAILABLE ACCESSORY:

❏ 2000.102P Escutcheon Plate Only

GENERAL DESCRIPTION:

Brass body. Washerless 35 mm ceramic disc valve

cartridge with integral hot limit safety stop. Braided

exible supply hoses with 3/8" compression connectors.

20" (500 mm) long exible stainless steel drain cable is

pre-assembled to faucet body. Metal Speed Connect

drain body with 1-1/4" (32 mm) tail piece. 1.2 gpm/4.5 L/min.

maximum ow rate. Fitting can be mounted on 4" centers

using optional escutcheon (2064.101P) or single hole

mounting method.

PRODUCT FEATURES:

Ceramic Disc Valve Cartridge: Assures a lifetime of

smooth handle operation and drip-free performance.

Exclusive Speed Connect Metal Drain:

• Fewer parts. Installs in less time.

• No adjustments required - seals the rst time, every time.

• Flexible stainless steel cable - installs effortlessly in

tight spaces.

Lead Free: Faucet contains ≤ 0.25% total lead content by

weighted average.

SUGGESTED SPECIFICATION

Single control lavatory faucet shall feature a brass swivel spout and metal lever handle. Shall also feature washerless ceramic

disc valve cartridge. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American

Standard Model # 7186.101.___.

OPTIONAL

ESCUTCHEON

PLATE

1-1/4" OD

(32 mm OD)

1-3/8"

(35 mm) DIA.

MOUNTING

HOLE

3/8" COMPRESSION

CONNECTORS

2-1/4"

(57 mm) MAX.

22"

(560 mm)

5-1/4"

(134 mm)

7-3/4"

(198 mm)

6-7/8"

(167 mm)

8/7/8"

(221 mm)

Ø 2-1/8"

(55 mm)

4-3/8"

(112 mm)

7" MAX

(178 mm MAX)

2-1/2"

(64 mm)

6-1/4"

(159 mm)

Revised 12/15

Summary of content (2 pages)

PAGE 1
FLUENT® SINGLE CONTROL LAVATORY FAUCET MODEL NUMBER: ❏ 7186.101 Single Control Lavatory Metal Speed Connect ® pop-up drain. Metal lever handle. AVAILABLE ACCESSORY: ❏ 2000.102P Escutcheon Plate Only 7-3/4" (198 mm) 6-7/8" (167 mm) OPTIONAL ESCUTCHEON PLATE 8/7/8" (221 mm) 5-1/4" (134 mm) 4-3/8" (112 mm) 2-1/2" (64 mm) 1-3/8" (35 mm) DIA. MOUNTING HOLE Ø 2-1/8" (55 mm) 2-1/4" (57 mm) MAX.
PAGE 2
FLUENT® SINGLE CONTROL LAVATORY FAUCET CODES AND STANDARDS These products meet or exceed the following codes and standards: 1.2 GALLONS PER MINUTE ANSI A117.1 ASME A112.18.1 NSF 61/Section 9 and Annex G CSA B125.1 FLOW RATE* 1.4 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number 7186101 Description Polished Chrome Oil Rubbed Bronze PVD Satin Nickel 002 224 295 Fluent™ single control lavatory faucet.