STUDIO S® BATH ACCESSORIES TOWEL BARS MODEL NUMBER: ❏ 7105.018 - 18" Towel Bar ❏ 7105.024 - 24" Towel Bar Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 2" (50 mm) 2" (50 mm) 18" (457 mm) 3-7/8" (99 mm) 2" (50 mm) 2" (50 mm) 3-7/8" (99 mm) 24" (609 mm) PRODUCT FEATURES: Materials of Construction: Metal construction for durability & long life. Brass rod. Concealed Mounting: No exposed set screws.
STUDIO S® BATH ACCESSORIES TOWEL RING MODEL NUMBER: ❏ 7105.190 - Towel Ring Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 2" (50 mm) 2-3/16" (56 mm) 2" (50 mm) 3-3/16" (80 mm) 7-3/4" DIA. (195 mm) PRODUCT FEATURES: Materials of Construction: Metal construction for durability & long life. Bushing on towel ring to prevent scratching and squeaking Concealed Mounting: No exposed set screws. Easy to Install SUGGESTED SPECIFICATION Towel Ring shall feature metal construction.
STUDIO S® BATH ACCESSORIES TOWEL RING MODEL NUMBER: ❏ 7105.190 - Towel Ring Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 2" (50 mm) 2-3/16" (56 mm) 2" (50 mm) 3-3/16" (80 mm) 7-3/4" DIA. (195 mm) PRODUCT FEATURES: Materials of Construction: Metal construction for durability & long life. Bushing on towel ring to prevent scratching and squeaking Concealed Mounting: No exposed set screws. Easy to Install SUGGESTED SPECIFICATION Towel Ring shall feature metal construction.
STUDIO S® BATH ACCESSORIES ROBE HOOK MODEL NUMBER: ❏ 7105.210 - ROBE HOOK Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 1-5/8" (41 mm) 4-1/16" (103 mm) 2-15/16" (74 mm) 2" (50 mm) PRODUCT FEATURES: Materials of Construction: Metal construction for durability & long life. Concealed Mounting: No exposed set screws. Easy to Install SUGGESTED SPECIFICATION Robe Hook shall feature metal construction. Shall feature concealed mounting with no exposed set screws.
STUDIO S® BATH ACCESSORIES DOUBLE TOWEL BAR MODEL NUMBER: ❏ 7105.224 - DOUBLE Towel Bar Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 2" (50 mm) 2-5/8" (66 mm) 5-1/4" (133 mm) 24" (609 mm) PRODUCT FEATURES: Materials of Construction: Metal construction for durability & long life. Brass rod. Concealed Mounting: No exposed set screws. Easy to Install SUGGESTED SPECIFICATION 24" Double Towel Bar shall feature metal construction. Rods shall be brass.
STUDIO S® BATH ACCESSORIES TOILET PAPER HOLDER MODEL NUMBER: ❏ 7353.230 - Toilet Paper Holder Available Finishes 002 Polished Chrome 295 PVD Brushed Nickel 2" (50 mm) 4-1/16" (103 mm) 2" (50 mm) 6-3/8" (162 mm) PRODUCT FEATURES: Materials of Construction: Metal construction for durability & long life. Concealed Mounting: No exposed set screws. Easy to Install Easy to Use SUGGESTED SPECIFICATION Toilet Paper Holder shall feature metal construction.
SHOWER SYSTEMS WALL MOUNT TUB SPOUTS Model # Description 8888.316 SLIP-ON NON-DIVERTER TUB SPOUT • For 1/2" copper pipe • Metal Construction • 6-1/8" length to center of stream straightener Finishes .002 Polished Chrome .295 Brushed Nickel (PVD) Roughing-In Dimensions 25 mm (1") MIN. 6-1/8" REF. (155 mm) 8888.317 NON-DIVERTER 1/2 IPS TUB SPOUT • For 1/2" copper pipe • Metal Construction • 6-1/8" length to center of stream straightener .002 Polished Chrome .
SHOWER SYSTEMS WALL MOUNT TUB SPOUTS Model # Description 8888.056 SLIP-ON NON DIVERTER TUB SPOUT • For 1/2" copper pipe • Metal Construction Finishes Roughing-In Dimensions .002 Polished Chrome .224 Oil Rubbed Bronze 130 mm REF. (5-1/8") 8888.026 SLIP-ON 4" DIVERTER TUB SPOUT • For 1/2" copper watertube • Metal Construction .002 Polished Chrome 121 mm REF. (4-3/4") © 2017 AS America, Inc.
SHOWERHEAD MODEL NUMBER: ❏ 1660.527 Showerhead 1/2" NPT 8" (200 mm) GENERAL DESCRIPTION: Single function showerhead. Full spray pattern. Brass ball joint. Easy clean spray nozzles. 2.5 gpm/9.5 L/min. maximum flow rate. PRODUCT FEATURES: Single Function: Showerhead provides drenching spray for full coverage of the user. Easy Clean Spray Nozzles: Easily clean lime and calcium build up. Nozzles will not clog. SUGGESTED SPECIFICATION Showerhead shall have 1 spray pattern and brass ball joint.
SHOWERHEAD FLOW RATE CODES AND STANDARDS ASME A112.18.1 CSA B125.1 GALLONS PER MINUTE These products meet or exceed the following codes and standards: 3.0 2.5 2.0 1.5 1.0 0.5 0 20 40 60 80 100 INLET PRESSURE (PSI) Finishes Product Number 1660.
WATER-SAVING SHOWERHEAD MODEL NUMBER: ❏ 1660.528 Water-Saving Showerhead 1/2" NPT 8" (200 mm) GENERAL DESCRIPTION: Single function showerhead. Full spray pattern. Brass ball joint. Easy clean spray nozzles. 1.8 gpm / 6.8L/min. maximum flow rate. PRODUCT FEATURES: Water-Saving: Save 30% in water usage. Single Function: Showerhead provides drenching spray for full coverage of the user. Easy Clean Spray Nozzles: Easily clean lime and calcium build up. Nozzles will not clog.
WATER-SAVING SHOWERHEAD CODES AND STANDARDS ASME A112.18.1 CSA B125.1 FLOW RATE* 6 GALLONS PER MINUTE These products meet or exceed the following codes and standards: 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finishes Product Number 1660.528 Description Polished Chrome PVD Brushed Nickel 002 295 Water-Saving Showerhead Only © 2017 AS America, Inc.
STUDIO® S IN-WALL DIVERTER VALVES MODEL NUMBER: TRIM KIT: ❏ T105.430 Diverter Valve Trim Valve trim ONLY. LESS Valve. ROUGH VALVES BODIES: ❏R 422 Two-Way In-Wall Diverter Valve Rough (Discrete) 1/2" NPT inlets/outlets. 2 Discrete functions. LESS Handle. ❏ R422S Two-Way In-Wall Diverter Valve Rough (Shared) 1/2" NPT inlets/outlets. 2 Discrete/1 Shared functions. LESS Handle. ❏ R433 Three-Way In-Wall Diverter Valve Rough (Discrete) 1/2" NPT inlets/outlets. 3 Discrete functions. LESS Handle.
STUDIO® S These products meet or exceed the following codes and standards: ASME A112.18.1 16 14 12 10 8 6 4 2 0 FLOW RATE - R422 Port A Tub Port GALLONS PER MINUTE CODES AND STANDARDS GALLONS PER MINUTE IN-WALL DIVERTER VALVES 20 30 40 50 60 70 80 16 14 12 10 8 6 4 2 0 FLOW RATE - R433 20 Port A Tub Port Tub Port + Port A 20 30 40 50 60 70 80 16 14 12 10 8 6 4 2 0 INLET PRESSURE (PSI) TRIM KITS * T105.430 Diverter Valve Trim. LESS valve.
STUDIO® S PRESSURE BALANCE BATH/SHOWER FITTING MODEL NUMBER: TRIM KIT: ❏ T105.508 Studio S BATH/SHOWER Trim Kit Lever Handle. LESS Valve Body. ❏ T105.507 Studio S SHOWER ONLY Trim Kit Lever Handle. LESS Valve Body. H For use with R110 Series Pressure Balance Valves. See reverse side for available Rough Valves. C T105.508 Bath/Shower Trim Shown FINISHED WALL GENERAL DESCRIPTION: SHOWERHEAD Water saving rain showerhead offers performance and water savings at a 1.8 gpm/6.8L/min. flow rate.
STUDIO® S IN-WALL DIVERTER VALVES CODES AND STANDARDS ANSI A 117.1 ASSE 1016 ASME A112.18.1 CSA B 125.1 FLOW RATE* Spout Shower 8 GALLONS PER MINUTE These products meet or exceed the following codes and standards: 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. TRIM KITS * * TRIM & ROUGH MUST BE ORDERED SEPARATELY. Product Number Description Finish Options PVD Polished Brushed Chrome Nickel 002 295 T105.508 Bath/Shower Trim Kit. Metal Lever Handle.
STUDIO® S PRESSURE BALANCE BATH/SHOWER FITTING MODEL NUMBER: TRIM KIT: ❏ T105.502 Studio S BATH/SHOWER Trim Kit Metal Lever Handle. LESS Valve Body. ❏ T105.501 Studio S SHOWER ONLY Trim Kit Metal Lever Handle. LESS Valve Body. H ❏ T105.500 Studio S VALVE ONLY Trim Kit C Metal Lever Handle. LESS Valve Body. For use with R110 Series Pressure Balance Valves. See reverse side for available Rough Valves. T105.
STUDIO® S IN-WALL DIVERTER VALVES CODES AND STANDARDS ANSI A 117.1 ASSE 1016 ASME A112.18.1 CSA B 125.1 FLOW RATE* Spout Shower 8 GALLONS PER MINUTE These products meet or exceed the following codes and standards: 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. TRIM KITS * * TRIM & ROUGH MUST BE ORDERED SEPARATELY. Product Number Description Finish Options PVD Polished Brushed Chrome Nickel 002 295 T105.502 Bath/Shower Trim Kit. Metal Lever Handle.
STUDIO® S SINGLE CONTROL LAVATORY FAUCET MODEL NUMBER: ❏ 7105.101 Studio S Single Control Monoblock Lever handle. Metal Speed Connect ® pop-up drain. 7-5/16" (185 mm) OPTIONAL ESCUTCHEON PLATE 7" (177 mm) 2-3/16" (56 mm) 5-1/2" 139 mm 6-3/16" (157 mm) 1-1/4"DIA. (32 mm) 2" MAX. (50 mm) 3/8" (9 mm) 22" (560 mm) 1-1/4" OD (32 mm OD) GENERAL DESCRIPTION: PRODUCT FEATURES: Brass body. Washerless 35 mm ceramic disc valve cartridge with integral hot limit safety stop.
STUDIO® S SINGLE CONTROL LAVATORY FAUCET CODES AND STANDARDS These products meet or exceed the following codes and standards: 1.2 GALLONS PER MINUTE ANSI A117.1 ASME A112.18.1 CSA B125.1 NSF 61/Section 9 NSF 372 FLOW RATE* 1.4 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number 7105.101 Description Polished Chrome PVD Brushed Nickel 002 295 Studio S Single Control Monoblock.
STUDIO® S SINGLE CONTROL VESSEL FAUCET MODEL NUMBER: ❏ 7105.152 Studio S Single Control Monoblock Grid Drain. 5-1/2" (139 mm) 13-9/16" (344 mm) 11-5/32" (283 mm) 3" MAX. (76 mm) 16-3/4" (425 mm) GENERAL DESCRIPTION: PRODUCT FEATURES: Brass body. Washerless 35 mm ceramic disc valve cartridge with integral hot limit safety stop. Integrated 38" color coded braided flexible supply hoses with 3/8" compression connectors.1.2 gpm/4.5 L/min. maximum flow rate. Brass Construction: Durable. Easy to clean.
STUDIO® S SINGLE CONTROL VESSEL FAUCET CODES AND STANDARDS These products meet or exceed the following codes and standards: 1.2 GALLONS PER MINUTE ANSI A117.1 ASME A112.18.1 CSA B125.1 NSF 61/Section 9 NSF 372 FLOW RATE* 1.4 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number 7105.152 Description Polished Chrome PVD Brushed Nickel 002 295 Studio S Single Control Monoblock faucet with grid drain.
STUDIO® S TWO-HANDLE THERMOSTAT MODEL NUMBER: TRIM KIT: ❏ T105.740 Two-Handle Thermostat Trim Kit With separate volume control. LESS Valve. ROUGH VALVES: TEMPERATURE & ON/OFF VOLUME CONTROL ONLY T HO ❏ R520 Rough Valve Body only CO L D 1/2" NPT inlets/outlets. With separate volume control. LESS Trim. ❏ R540 Rough Valve Body only 3/4" NPT inlets/outlets. With separate volume control. LESS Trim.
STUDIO® S TWO-HANDLE THERMOSTAT FLOW RATE* CODES AND STANDARDS ASSE 1016 ASME A112.18.1 CSA B125.1 25 GALLONS PER MINUTE These products meet or exceed the following codes and standards: 3/4" 1/2" 20 15 10 5 0 20 40 60 80 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. ROUGH VALVE BODIES TRIM KITS ** ** TRIM & ROUGH MUST BE ORDERED SEPARATELY. Product Number Description Finish Options Polished Chrome PVD Brushed Nickel 002 295 T105.
STUDIO® S TWO-HANDLE WIDESPREAD LAVATORY FAUCET MODEL NUMBER: ❏ 7105.801 Studio S Widespread etal Speed Connect ® pop-up drain. M Metal lever handles. ❏ 7105.821 Studio S Widespread Metal Speed Connect ® pop-up drain. Metal knob handles. 8" (203 mm) 7105.801 Shown 6-11/16" (169 mm) 2" DIA. (50 mm) 4-7/8" (124 mm) 1-1/2" MAX. (38 mm) 1-1/16" DIA. (29 mm) 8-11/16" (211 mm) 5-9/16" (140 mm) FLEXIBLE HOSE 1-1/4" MAX.
STUDIO® S TWO-HANDLE WIDESPREAD LAVATORY FAUCET CODES AND STANDARDS These products meet or exceed the following codes and standards: 1.2 GALLONS PER MINUTE ANSI A117.1 ASME A112.18.1 CSA B125.1 NSF 61/Section 9 NSF 372 FLOW RATE* 1.4 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number Description 7105.801 Studio S Widespread with metal Speed Connect ® pop-up drain. Metal lever handles. 7105.